1. Introducción
This document serves as the official instruction manual for the Asia-Teco EF39 IP68 Waterproof Metal Fingerprint Access Control Keypad. Engineered with a robust zinc alloy housing, it offers anti-explosion and anti-vandal properties. Its IP68 waterproof rating ensures suitability for outdoor environments.
The system supports up to 100 fingerprint users and 10,000 card/code users, providing versatile access methods including fingerprint, RFID card, PIN code, multi-user combinations, and temporary visitor access. It can also be configured to function as a card reader. Advanced features include door contact detection and anti-tamper functions for enhanced security, along with support for uploading and downloading user data.
Vídeo: Terminadoview of the EF39 Access Control Keypad and its components.
2. Características del producto
- Construcción duradera: Made from high-quality stainless steel material.
- Clasificación de impermeabilidad: IP68 certified, suitable for outdoor installation and harsh weather conditions.
- Capacidad de usuario: Supports up to 100 fingerprint users and 10,000 card/PIN code users.
- Vol de funcionamientotage: CC 12 V.
- Tipo de tarjeta: Compatible with 125KHz EM/MF cards.
- Interfaz Wiegand: Features WG26 input/output for integration with other access control systems.
- Dual Color Indicator Light: Red light indicates standby mode, green light illuminates upon successful door opening. Sensing distance of 2-5cm.
- Reconocimiento rápido de huellas dactilares: Sensitive sensing for quick and reliable identification, unaffected by sunlight or rain.
- Tarjetas de gestión: Includes dedicated 'Add User' and 'Delete User' admin cards for simplified user management.
- Teclado remoto: Provides an alternative method for programming and managing the device.
Image: Key features of the embedded access control unit, including stainless steel, IP68 waterproof, DC12V, 200 fingerprint capacity, 10000 RFID card capacity, and WG26 I/O.
Image: The IP68 waterproof stainless steel panel, fully sealed for outdoor access control.
Image: The dual-color indicator light, showing red for standby and green for door open, with a sensing distance of 2-5cm.
Image: Depiction of fast and sensitive fingerprint identification, unaffected by sunlight or rain.
Image: The included 'Add User' and 'Delete User' management cards.
3. Contenido del paquete
Al abrir el paquete, verifique que estén incluidos todos los siguientes elementos:
- 1 x Fingerprint Access Control Unit (Model EF39)
- 1 x Manual de usuario
- 1 x Guarantee Item Card
- 1 teclado remoto.
- 1 x Add User Card
- 1 x Delete User Card
- Tornillos de montaje y tacos de pared
Imagen: Una representación visual de todos los elementos incluidos en el paquete del producto.
4. Especificaciones
| Característica | Especificación |
|---|---|
| Número de modelo | EF39 |
| Nombre de marca | Asia Teco |
| Capacidad de usuarios de huellas dactilares | 100 |
| Capacidad de usuario de tarjeta/usuario PIN | 10,000 |
| Vol de funcionamientotage | 12 V CC |
| Corriente de reposo | <35 mA |
| Corriente activa | <120 mA |
| Tipo de tarjeta | EM card / MF |
| Frecuencia de la tarjeta | 125 kHz |
| Rango de lectura | 2-5 cm |
| Temperatura de funcionamiento | -20℃ ~ +60℃ |
| Humedad de funcionamiento | 0%-95% |
| Bloqueo de carga de salida | ≤1A |
| Clasificación de impermeabilidad | IP68 |
| Short-circuit Protect Time | ≤100us |
| Dimensiones (aprox.) | 115 mm (largo) x 40 mm (ancho) x 17 mm (profundidad) |
Image: Detailed product parameters and physical dimensions of the access control unit.
5. Instalación
The EF39 access control keypad is designed for embedded installation, providing a sleek and secure flush-mount finish. This requires preparing a suitable recess in the wall or door frame where the unit will be installed.
5.1. Preparación
- Identify the desired installation location on a wall or door frame.
- Measure the dimensions of the unit (115mm L x 40mm W x 17mm D) to create an appropriately sized recess.
- Ensure there is sufficient space behind the installation surface for wiring.
5.2. Montaje
- Carefully cut a recess into the chosen surface according to the unit's dimensions.
- Route the wiring through the prepared opening.
- Insert the access control unit into the recess.
- Secure the unit using the provided mounting screws through the designated holes on the stainless steel faceplate.
Image: The embedded installation design, showing the unit flush-mounted into a door frame.
Imagen: Un lado view illustrating how the unit is designed to be embedded.
6. Diagrama de cableado
Proper wiring is crucial for the correct functioning of the access control system. Refer to the diagram below for connections:
Image: Detailed wiring connections for the EF39 unit.
| Color del cable | Función |
|---|---|
| Verde | D0 (Datos Wiegand 0) |
| Blanco | D1 (Datos Wiegand 1) |
| Amarillo | OPEN (BEEP) |
| Rojo | +12 V (entrada de energía) |
| Negro | GND (tierra) |
| Azul | NO (Normalmente abierto - Salida de bloqueo) |
| Púrpura | COM (Común - Salida de bloqueo) |
| Naranja | NC (normalmente cerrado - salida de bloqueo) |
Nota: Ensure power is disconnected before performing any wiring to prevent damage to the device or injury.
7. Operación
7.1. Unlocking Modes
The EF39 supports multiple methods for unlocking:
- Desbloqueo mediante huella dactilar: Coloque un dedo registrado sobre el sensor.
- Desbloqueo de tarjeta RFID de 125 KHz: Present a registered RFID card to the sensor.
- Desbloqueo remoto: Use the provided remote keypad to enter a valid PIN code.
Image: Visual representation of the three unlocking methods: fingerprint, RFID card, and remote keypad.
7.2. Gestión de usuarios
User management (adding or deleting fingerprints, cards, or PINs) is typically performed using the dedicated 'Add User' and 'Delete User' management cards or through the remote keypad. Refer to the detailed instructions in the included user manual for specific programming steps.
Image: The 'Add User' and 'Delete User' management cards used for programming.
8. Mantenimiento
Para garantizar la longevidad y el rendimiento óptimo de su teclado de control de acceso, siga estas pautas de mantenimiento:
- Limpieza: Regularly wipe the fingerprint sensor and the stainless steel surface with a soft, dry, lint-free cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish and electronic components.
- Verificación de conexión: Periodically inspect all wiring connections to ensure they are secure and free from corrosion, especially in outdoor installations.
- Protección ambiental: While the device is IP68 waterproof, extreme environmental conditions (e.g., prolonged submersion, direct high-pressure water jets) should be avoided.
9. Solución de problemas
If you encounter issues with your EF39 access control keypad, refer to the following common problems and solutions:
- El dispositivo no responde:
- Check if the DC12V power supply is correctly connected and providing power.
- Ensure all wiring connections are secure. - Huella dactilar no reconocida:
- Ensure your finger is clean and dry when attempting to scan.
- Try re-registering your fingerprint if recognition issues persist.
- Ensure the fingerprint sensor is clean and free of debris. - Tarjeta RFID no reconocida:
- Verify that you are using a compatible 125KHz EM/MF card.
- Confirm that the card has been properly registered with the system.
- Ensure the card is presented within the 2-5cm read range. - La puerta no se desbloquea:
- Check the wiring connections to your electric lock (NO, COM, NC).
- Ensure the electric lock itself is receiving power and functioning correctly.
- Verify that the access method (fingerprint, card, PIN) used is valid and registered. - Remote Keypad Not Working:
- Ensure there is a clear line of sight between the remote and the access control unit during programming.
- If the remote uses batteries, check if they need replacement.
10. Consejos para el usuario
- Wiegand Integration: The EF39 supports Wiegand 26 input/output, allowing for seamless integration with existing or larger access control systems. This feature provides flexibility for advanced security setups.
- Relé de salida: The device includes an output relay, which is essential for connecting and controlling various types of electric door locks, ensuring compatibility with most standard locking mechanisms.
Image: Illustrates the WG26 input/output capability, supporting 200 fingerprints and 10,000 card users.
11. Garantía y soporte
11.1. Información de garantía
This product comes with a one-year warranty from the date of original purchase. The warranty covers manufacturing defects under normal use. Please note that the warranty does not cover defects or damages caused by misuse, accidental damage, fire, unauthorized modifications, or improper installation.
11.2. Soporte técnico
For any technical assistance, troubleshooting, or inquiries regarding your Asia-Teco EF39 access control keypad, please contact our customer support. You can typically reach support via the trade manager on the platform where the product was purchased. Please provide your product model (EF39) and a detailed description of your issue for efficient assistance.