Dometic 385314349

Instruction Manual: Dometic RV Toilet Water Valve Kit

Modelo: 385314349

This manual provides essential information for the proper installation, operation, and maintenance of your RV toilet water valve kit.

Producto terminadoview

The Dometic RV Toilet Water Valve Kit (Part Number 385314349) is a high-quality replacement component designed to ensure precise water flow control for various RV and marine toilets. Made from durable plastic, this kit is engineered for stable performance and extended service life, providing a clean and efficient bathroom environment.

This kit is compatible with a wide range of Dometic/Sealand, VacuFlush, and Traveler toilet models. Please refer to the 'Specifications' section for a detailed compatibility list.

Contenido del paquete

  • 2 x Water Valve Kit
  • Mounting Screws (quantity as pictured)
Two Dometic RV toilet water valve kits with mounting screws
Image 1: Contents of the Water Valve Kit (2 units shown with screws)

Guía de instalación

This water valve kit is designed for easy installation, typically requiring only basic tools. Always ensure the water supply to the toilet is turned off before beginning any installation or maintenance.

  1. Cierre el suministro de agua: Locate the main water shut-off valve for your RV or the specific toilet and turn it off. Flush the toilet to relieve any remaining water pressure.
  2. Desconecte la válvula vieja: Carefully disconnect the water lines attached to the existing water valve. Be prepared for some residual water to drain. Remove any mounting screws or clamps securing the old valve.
  3. Retire la válvula vieja: Detach the old water valve from the toilet assembly. Note its orientation and connections for reference.
  4. Preparar nueva válvula: Inspect the new water valve kit for any damage. Ensure all seals and gaskets are in place.
  5. Instalar nueva válvula: Position the new water valve in the same orientation as the old one. Secure it using the provided mounting screws.
  6. Conectar líneas de agua: Reconnect the water inlet and outlet lines to the new valve. Ensure all connections are tight to prevent leaks.
  7. Restablecer el suministro de agua: Slowly turn on the water supply to the RV toilet. Check all connections for leaks.
  8. Operación de prueba: Flush the toilet several times to ensure proper water flow and valve function.
Lado view of two Dometic RV toilet water valve kits with screws
Imagen 2: Lateral view of the water valve kit, illustrating connection points.
Frente view of two Dometic RV toilet water valve kits with screws
Imagen 3: Frente view of the water valve kit, showing the plunger mechanism.

Instrucciones de funcionamiento

The water valve kit is an integral part of your RV toilet's flushing mechanism. Its primary function is to precisely control the flow of water into the toilet bowl during flushing and to seal off the water supply when not in use.

  • Enrojecimiento: When the toilet's flush lever or pedal is activated, the water valve opens, allowing water to enter the bowl for rinsing and waste removal.
  • Control del agua: The valve ensures that the correct amount of water is dispensed for an effective flush while preventing continuous water flow when the flush mechanism is released.

Mantenimiento

Regular maintenance helps prolong the life of your water valve and ensures optimal performance. The simple structure of this valve facilitates easy inspection and replacement.

  • Inspección regular: Periodically check the valve and its connections for any signs of leaks, cracks, or wear.
  • Limpieza: If mineral deposits or debris accumulate, they can affect valve performance. Disconnect the water supply and carefully clean the valve components as needed.
  • Winterización: In cold climates, ensure your RV's plumbing system, including the toilet water valve, is properly winterized to prevent freezing and damage.
  • Saneamiento: Maintain overall RV toilet hygiene to prevent issues that could impact the water valve's function.

Solución de problemas

If you encounter issues with your RV toilet's water flow, the water valve may be a contributing factor. Here are some common problems and potential solutions:

  • Sin flujo de agua:
    - Check if the main RV water supply is on and there is adequate water pressure.
    - Inspect the water lines for kinks or blockages.
    - The valve might be clogged with debris or mineral deposits. Consider cleaning or replacing the valve.
  • Continuous Water Flow (Leaking):
    - This often indicates a faulty seal or a worn-out valve mechanism. The valve may not be closing completely.
    - Inspect the valve for any visible damage or debris preventing it from sealing.
    - Replacement of the water valve kit is usually necessary for persistent leaks.
  • Flujo de agua débil:
    - Low water pressure in the RV system.
    - Partial blockage in the water lines or within the valve itself.

Si los pasos de solución de problemas no resuelven el problema, es posible que se requiera asistencia profesional.

Presupuesto

AtributoDetalle
MaterialPlástico
CantidadPaquete de 2
Número de pieza OEM385314349
Replace Part Numbers3754, 5996, 5997, 8290, 123-8290, 314349
Marcas compatiblesFor Dometic Sealand, For VacuFlush, For Traveler
Compatible Dometic/Sealand Models506+, 510+, 511 H, 547+, 548+, 706, 709, 748, 749, 806, 808, 847, 848, 1147, 1148, 2010, 2011, 5006, 5047, 5048, 5049, etc.
Compatible EcoVac Models146-149
Compatible VacuFlush Models168, 606, 647, 648, 1006, 1008, 1047, 1048, 1049, 1106, 5146, 5147, 5148, 5149
Otros modelos compatibles110, 111, 147, 148, 210, 211, 248, etc. (DOES NOT fit for 300, 301, 310, 320 models!)
Dimensiones (aproximadas)Total Height: 10.16 cm (4 inches)
Body Width: 5.08 cm (2 inches)
Outlet/Inlet Lengths: 0.97 cm (0.38 inches) and 1.57 cm (0.62 inches)
Peso del paquete0.236 kilogramos
Dimensiones del paquete10 cm (largo) x 8 cm (ancho) x 8 cm (alto)
Diagram showing dimensions of the water valve kit
Image 4: Dimensional diagram of the water valve kit.

Consejos para el usuario

  • When replacing the valve, ensure all old gasket material is removed for a proper seal with the new valve.
  • Use thread sealant tape on threaded connections to prevent leaks.
  • Always keep a spare water valve kit on hand, especially for extended RV trips, as they are critical components.
  • If you experience low water pressure in your RV, check other fixtures before assuming the valve is the sole cause.

Garantía y soporte

For specific warranty information regarding your Dometic RV Toilet Water Valve Kit, please refer to the documentation provided by the original manufacturer or contact your seller directly. Keep your purchase receipt as proof of purchase.

If you require technical assistance or have questions not covered in this manual, please contact the seller or a qualified RV service technician.

Documentos relacionados - 385314349

Preview Inodoro Dometic serie 4700 VacuFlush: Guía de funcionamiento, mantenimiento y solución de problemas
Manual de instrucciones completo para el sistema de inodoro Dometic Serie 4700 VacuFlush. Incluye especificaciones de instalación, funcionamiento normal, procedimientos de mantenimiento, preparación para el invierno, solución de problemas comunes e información sobre la garantía.
Preview Inodoros trituradores Dometic serie 8800 MasterFlush: Manual de instalación y funcionamiento
Manual de instrucciones completo para inodoros maceradores Dometic Serie 8800 MasterFlush, que cubre la instalación, el funcionamiento, el mantenimiento y la resolución de problemas para aplicaciones marinas y de vehículos recreativos.
Preview Guía del producto del panel de estado Dometic VacuFlush: instalación, especificaciones y garantía
Guía completa del producto para el panel de estado Dometic VacuFlush, que incluye instrucciones de seguridad, especificaciones técnicas, características del producto, guía de instalación, instrucciones de uso, especificaciones dimensionales, lista de piezas, diagramas de cableado e información de garantía.
Preview Manual de instalación de inodoros de cassette Dometic
Manual de instalación completo para inodoros de cassette Dometic, que abarca los modelos CT4050, CT4110, CTE4110, CTLP4050, CTLP4110, CTS4050, CTS4110, CTES4110, CTW4050 y CTW4110. Incluye instrucciones detalladas de instalación, conexiones eléctricas y especificaciones técnicas.
Preview Inodoros Dometic MasterFlush Serie 8900: Características y especificaciones
Descubra los inodoros Dometic MasterFlush Serie 8900, que ofrecen una potente trituración, un diseño compacto y opciones de descarga eficientes para aplicaciones marinas. Conozca sus principales ventajas, dimensiones y especificaciones técnicas.
Preview Guía de instalación y especificaciones de la bomba de vacío Dometic Serie S
Instrucciones de instalación para la bomba de vacío Dometic Serie S (SW12, SW24) con motor W. Incluye especificaciones dimensionales y eléctricas, pasos de instalación, diagramas de cableado, lista de piezas e información sobre la garantía limitada.