Notas importantes
Faucet Thread Standards:
Please ensure you match the correct faucet thread standard for your country before installation.
- BSP (tubería estándar británica):Aplicable a la mayoría de los países europeos, Reino Unido, Corea del Sur, Australia, etc.
- NH (Manguera Nacional):Aplicable a EE. UU., Canadá, México, etc.
Water Pressure and Temperature:
- Rango de operación de presión: 7.25 ~ 116 PSI (0.5 ~ 8 bar)
- Rango de temperatura de funcionamiento: 4.5℃ ~ 45℃ (40.1°F ~ 113°F)
Producto terminadoview
The Diivoo 2-Zone Garden Water Timer (Model DI-WT21M) is a programmable automatic irrigation timer designed to manage watering for two independent zones in your lawn or yard. It features a rain delay function and manual watering mode for flexible control.
Características principales:
- 2 Independent Irrigation Zones: Allows separate scheduling for different areas.
- Programmable Watering: Set start time, duration (0-240 min), and frequency (every 1H/3H/6H/12H or 1-7 days, including even/odd days).
- Modo de retraso por lluvia: Suspend watering for 1 to 7 days to prevent over-watering.
- Modo de riego manual: Temporarily water without interrupting preset programs.
- Resistente al agua IPX5: Designed to prevent water ingress, ensuring durability.
- Upgraded Leakproof Design: Connectors made of 30% reinforced nylon material, with aluminum alloy filter, thread seal tape, and sealing washer.
- Easy to Read and Setup: Minimalist settings with a clear display and rotary dial.
- Bajo consumo de energía: Powered by 2 AA alkaline batteries (not included) with a 6-8 month lifespan.
Vídeo del producto terminadoview
Video demonstrating the Diivoo Water Timer's features, including independent zones, watering duration, frequency, rain delay, and manual watering.
Instrucciones de instalación
- Instalar baterías: Open the battery compartment on the back of the timer. Insert 2 new AA 1.5V alkaline batteries (not included). Ensure correct polarity. Close the battery compartment securely.
- Prepare Faucet Connection: If your faucet is 1/2 inch, use the provided 1/2 inch adapter. For 3/4 inch faucets, no adapter is needed. Wrap PTFE tape (thread seal tape) around the faucet threads to ensure a watertight seal. Place a rubber O-ring inside the timer's inlet connector.
- Connect to Faucet: Attach the threaded inlet of the water timer to your outdoor faucet. Tighten firmly by hand.
- conectar mangueras: Attach your garden hoses to the bottom hose connectors (Zone 1 and Zone 2) of the timer. Ensure they are securely fastened.
- Montaje: For optimal performance and to prevent water leakage, ensure the timer is mounted horizontally.
Instrucciones de funcionamiento
The Diivoo water timer features a rotary dial and buttons for easy programming.
1. Puesta en hora del reloj
- Turn the rotary dial to 'SET CLOCK'.
- Utilice los botones '+' y '-' para ajustar la hora actual.
- Presione “OK” o gire el dial a la siguiente configuración para confirmar.
2. Programming Watering Plans (AUTO Mode)
Each zone (Zone 1 and Zone 2) can be programmed independently.
- Seleccionar Zona: Press the 'ZONE 1' or 'ZONE 2' button to select the zone you wish to program.
- Establecer hora de inicio: Turn the dial to 'START TIME'. Use '+' and '-' to set the desired start time for watering.
- Set Watering Duration ('HOW LONG'): Turn the dial to 'HOW LONG'. Use '+' and '-' to set the watering duration from 0 to 240 minutes.
- Set Watering Frequency ('HOW OFTEN'): Turn the dial to 'HOW OFTEN'. Use '+' and '-' to set the frequency:
- Every 1 hour, 3 hours, 6 hours, or 12 hours.
- Every 1 to 7 days (you can select specific days, including even or odd days).
- Activate Program: Once all settings are configured, turn the dial to 'AUTO' to activate the programmed schedule.
3. Modo de retraso por lluvia
This mode allows you to temporarily pause your watering schedule to conserve water during rainy periods.
- Ensure the dial is in the 'AUTO' state.
- Press and hold the '+' button (labeled 'DELAY') for 3 seconds.
- Utilice los botones '+' y '-' para seleccionar la duración del retraso deseada (1 a 7 días).
- The timer will automatically resume its programmed schedule after the delay period.
Nota: The Diivoo dual hose timer does not have a built-in rain sensor. You should monitor local weather forecasts to decide when to activate the rain delay.
4. Modo de riego manual
Este modo permite un riego temporal e inmediato sin afectar su cronograma programado.
- Press the 'MANUAL' button.
- Use the '+' and '-' buttons to select the desired watering duration (1 second to 240 minutes).
- Press 'OK' or wait a few seconds for the manual watering to begin.
- To stop manual watering, press the 'MANUAL' button again or turn the dial to 'OFF'.
5. Apagado del temporizador
Turn the rotary dial to 'OFF' to stop all watering programs and manual operations.
Mantenimiento
- Limpieza de filtros: The timer includes an aluminum alloy filter to prevent debris from entering. Periodically remove the filter and rinse it under running water to clear any accumulated particles.
- Reemplazo de batería: When the battery indicator on the display shows low power, replace the 2 AA alkaline batteries promptly to ensure continuous operation. The battery compartment is sealed to prevent water ingress.
- Winterization: Before the first frost, disconnect the water timer from the faucet and hoses. Drain any remaining water from the timer and store it indoors in a dry, protected area to prevent freezing damage.
- Cuidado a prueba de agua: While the timer is IPX5 waterproof, designed to withstand splashes and rain, avoid prolonged immersion in water or continuous heavy rain exposure. This can lead to screen fogging or potential damage over time.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| Fugas de agua en las conexiones | Loose connections, missing O-ring/PTFE tape, incorrect thread standard, non-horizontal mounting. | Ensure all connections are tight. Check for presence and proper placement of O-rings and PTFE tape. Verify faucet thread standard (BSP/NH). Ensure timer is mounted horizontally. |
| Timer not watering or not responding | Dead batteries, incorrect programming, dial in 'OFF' position. | Replace batteries. Check watering program settings (start time, duration, frequency). Ensure dial is set to 'AUTO' for programmed watering or 'MANUAL' for manual watering. |
| Low water flow or no water | Clogged filter, low water pressure. | Clean the aluminum alloy filter. Ensure your water pressure is within the operating range (7.25-116 PSI). |
| Screen fogging | Prolonged exposure to heavy rain or immersion. | Avoid prolonged exposure to heavy rain or immersion. If fogging occurs, remove batteries and allow to dry in a warm, dry place. |
Presupuesto
| Atributo | Valor |
|---|---|
| Número de modelo | DI-WT21M |
| Nombre de marca | Diivoo |
| Tipo | Garden Water Timer (2 Zone) |
| Material | Plastic, Reinforced Nylon Fiber |
| Clasificación de impermeabilidad | IPX5 |
| Rango de temperatura de funcionamiento | 4.5 ℃-45 ℃ / 40.1 °F-113 °F |
| Rango de operación de presión | 7.25~116 PSI / 0.5~8 bar |
| Fuente de alimentación | 2 pilas alcalinas AA de 1.5 V (no incluidas) |
| Duración de la batería | Aprox. 6-8 meses |
| Conector de entrada | 3/4" (BSP/NH, depending on region) with 1/2" adapter |
| Duración del riego | 1 segundo a 240 minutos |
| Frecuencia de riego | Every 1H/3H/6H/12H or 1-7 days |
| Dimensiones del paquete (L x W x H) | 14 cm x 13 cm x 7 cm |
| Peso del paquete | 0.57 kilogramos |
Consejos para el usuario
No se disponía de consejos específicos para usuarios de reviews o contenido de preguntas y respuestas.
- Always use fresh alkaline batteries for optimal performance and battery life.
- Regularly check and clean the filter to prevent blockages and maintain water flow.
- Consider the specific watering needs of different plants when setting up independent zones.
Garantía y soporte
For warranty information, technical support, or any product-related inquiries, please contact the manufacturer or your retailer directly. Keep your purchase receipt as proof of purchase.
