Manual de usuario de la placa base para servidor MSI MS-S0981 H87

1. Introducción

This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your MSI MS-S0981 H87 Server Motherboard. Designed for server applications, this motherboard supports LGA1150 processors, DDR3 memory, and various storage interfaces. Please read this manual thoroughly before proceeding with installation or operation.

Figure 1: MSI MS-S0981 H87 Server Motherboard (Top View)

2. Especificaciones

The following table details the technical specifications of the MS-S0981 H87 Server Motherboard:

Note: Specifications are subject to change without prior notice. Please refer to the product for exact details.

3. Contenido del paquete

Su paquete debe contener los siguientes artículos:

• MSI MS-S0981 H87 Server Motherboard
• I/O Shield (may vary based on availability for second-hand products)
• Cables de datos SATA (la cantidad puede variar)
• Manual de usuario (este documento)
• Driver CD/DVD (or link to download drivers online)

Note: As this is a second-hand product, some accessories might not be included. Please check the actual contents upon receipt.

4. Guía de configuración

4.1 Precauciones de seguridad

• Desconecte siempre la fuente de alimentación antes de instalar o quitar cualquier componente.
• Utilice una pulsera antiestática para evitar daños por descarga electrostática (ESD).
• Manipule la placa base por los bordes para evitar tocar componentes sensibles.

4.2 Instalación de componentes

1. CPU Installation (LGA1150):
   a. Open the CPU socket lever.
   b. Carefully align the CPU with the socket, ensuring the golden triangle on the CPU matches the triangle on the socket.
   c. Gently place the CPU into the socket. Do not force it.
   d. Close the lever to secure the CPU.
2. RAM Installation (DDR3):
   a. Open the clips on both ends of the DIMM slot.
   b. Align the memory module with the slot, ensuring the notch on the module matches the key in the slot.
   c. Press down firmly on both ends of the memory module until the clips snap into place.
3. Storage Device Installation (SATA & M.2):
   a. For SATA drives, connect one end of the SATA data cable to a SATA port on the motherboard and the other end to your storage drive. Connect the SATA power cable from your power supply to the drive.
   b. For M.2 SSDs (2280 form factor), locate the M.2 slot. Insert the M.2 SSD into the slot at an angle, then gently push it down and secure it with the provided screw.
4. Expansion Card Installation (PCIe & PCI):
   a. Locate the desired PCIe x16 or PCI slot.
   b. Align the expansion card with the slot and press down firmly until it is fully seated.
   c. Secure the card with a screw to the chassis.
5. Conexiones de fuente de alimentación:
   a. Connect the 24-pin ATX main power connector from your power supply to the corresponding header on the motherboard.
   b. Connect the 8-pin (or 4-pin) CPU power connector to the motherboard.
6. Conectores del panel frontal:
   a. Refer to the motherboard diagram (Figure 2) to locate the front panel headers.
   b. Connect the power button, reset button, HDD LED, and power LED connectors from your chassis to the appropriate pins.
7. Puertos de E/S posteriores:
   a. Ensure the I/O shield is installed in your chassis.
   b. Connect peripherals such as keyboard, mouse, monitor (via MINI DisplayPort), and network cables (to RJ45 ports) to the back I/O panel.

Figure 2: MSI MS-S0981 H87 Motherboard with component layout

Figure 3: Close-up of MS-S0981 VER: 1.0 marking and capacitors

5. Instrucciones de funcionamiento

5.1 Primer arranque y acceso a BIOS/UEFI

1. After all components are installed and connected, connect the power cord and turn on the power supply.
2. Presione el botón de encendido en su chasis.
3. During the boot process, repeatedly press the designated key (usually DEL, F2, or F10) to enter the BIOS/UEFI setup utility. Consult your system's documentation or on-screen prompts for the exact key.

5.2 Configuración del BIOS/UEFI

• Orden de arranque: Configure the boot order to prioritize your operating system installation media (USB drive, DVD-ROM) or primary storage drive.
• Hora/fecha del sistema: Set the correct system time and date.
• Moda SATA: Ensure the SATA mode (AHCI, RAID) is correctly configured based on your storage setup. This motherboard supports RAID 0.
• Guardar y salir: After making changes, save your settings and exit the BIOS/UEFI.

5.3 Instalación del sistema operativo

Follow the instructions provided with your chosen operating system (e.g., Windows Server, Linux distribution) to complete the installation process. Ensure all necessary drivers for the motherboard components (chipset, LAN, audio, etc.) are installed after the OS is set up.

6. Mantenimiento

6.1 Limpieza

• Regularly clean dust from the motherboard and other components using compressed air.
• Asegúrese de que el sistema esté apagado y desenchufado antes de limpiarlo.
• Evite utilizar limpiadores líquidos directamente sobre los componentes.

6.2 Actualizaciones de BIOS/Firmware

Revise periódicamente las instrucciones del fabricante. website for updated BIOS/firmware versions. Updates can improve stability, compatibility, and performance. Follow the provided instructions carefully when performing updates, as incorrect procedures can damage the motherboard.

6.3 Actualizaciones de controladores

Keep your system drivers (chipset, network, audio, etc.) up to date. You can usually find the latest drivers on the motherboard manufacturer's support websitio.

7. Solución de problemas

Si encuentra problemas, consulte los siguientes pasos de solución de problemas comunes:

• Sin poder: Ensure all power cables (24-pin ATX, 8-pin CPU) are securely connected. Check the power supply unit (PSU) and wall outlet.
• Sin pantalla: Verify that the monitor is connected to the correct video output (MINI DisplayPort) and is powered on. If using a dedicated graphics card, ensure it is properly seated and powered.
• System Fails to Boot: Check the boot order in BIOS/UEFI. Ensure the operating system drive is detected and functional. Re-seat RAM modules and expansion cards.
• Component Not Recognized: Power off the system, unplug it, and re-seat the problematic component (RAM, GPU, M.2 SSD, SATA drive). Check all connections.
• Calentamiento excesivo: Ensure CPU cooler is properly installed and making good contact. Check case fans for proper airflow. Clean dust from heatsinks.

8. Consejos para el usuario

• Inspección inicial: As this is a second-hand product, thoroughly inspect all components upon arrival for any visible damage or missing parts.
• Cooling for Server Use: For optimal performance and longevity in server applications, ensure your system has adequate cooling, especially for the CPU and chipset.
• BIOS Optimization: Take time to explore the BIOS/UEFI settings and optimize them for your specific server workload and hardware configuration.
• Compatibilidad del controlador: When installing an operating system, ensure you use drivers compatible with the H87 chipset and your chosen OS version.
• Testing Components: Before full deployment, test all installed components (CPU, RAM, storage, network ports) to ensure they are functioning correctly.

9. Garantía y soporte

For any technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact the seller directly. Provide your order number and a detailed description of the issue to facilitate a quicker resolution.

Información de contacto del vendedor:

• Store Name: Passiontech Store
• Seller ID: 240316868

Note: Specific warranty terms for second-hand products may vary. Please confirm with the seller at the time of purchase.

10. Producto terminadoview Video