1. Introducción
The Honeywell Home CT51N1008 Standard Heat/Cool Manual Thermostat provides a straightforward method for controlling your home's heating and cooling systems. This mercury-free thermostat is designed for ease of use, allowing precise temperature adjustments. It is compatible with central oil heating, electric furnaces, and central electric cooling options.
Figura 1: Frente view of the Honeywell Home CT51N Thermostat, showing the temperature scale and control switches.
2. Características principales
- Diseño sin mercurio.
- Precise temperature control for both heating and cooling systems.
- Standard heat/cool manual operation.
- Requires a 4-wire hookup.
- Compatible with central oil heating, electric furnaces, and central electric cooling.
- Designed for use in single transformer systems only.
- Works with heat pumps without auxiliary heat.
3. Configuración e instalación
Importante: Before beginning installation, ensure power to the heating and cooling system is turned off at the main fuse or circuit breaker panel to prevent electrical shock or equipment damage.
3.1 Ubicación de montaje
Install the thermostat on an inside wall, approximately 5 feet (1.5 meters) above the floor. Avoid locations near windows, doors, or heat sources (lamps, sunlight, fireplaces, etc.) that could affect temperature readings.
3.2 Instrucciones de cableado
- Turn off power to the heating/cooling system.
- Remove the old thermostat cover and note the wire connections. Label each wire with the terminal designation (e.g., R, W, Y, G) before disconnecting.
- Monte la nueva placa base del termostato en la pared utilizando los tornillos provistos.
- Connect the wires to the corresponding terminals on the CT51N thermostat. This thermostat typically requires a 4-wire hookup. Refer to your system's specific wiring diagram if unsure.
- Asegúrese de que todas las conexiones sean seguras.
- Attach the thermostat cover to the base plate.
- Restaure la energía al sistema de calefacción/refrigeración.
This thermostat is designed for single transformer systems only. Do not use with multi-transformer systems.
Figure 2: Dimensions of the Honeywell Home CT51N Thermostat, measuring approximately 2.88 inches wide, 1.38 inches deep, and 4.75 inches high.
4. Instrucciones de funcionamiento
The Honeywell Home CT51N thermostat features simple manual controls for temperature and fan operation.
4.1 System Switch (Heat/Off/Cool)
- Calor: Select this setting for heating operation. The system will turn on when the room temperature falls below your set temperature.
- Apagado: This setting turns off both heating and cooling systems.
- Fresco: Select this setting for cooling operation. The system will turn on when the room temperature rises above your set temperature.
4.2 Fan Switch (Auto/On)
- Auto: In this setting, the fan runs only when the heating or cooling system is actively operating. This is the most common and energy-efficient setting.
- En: In this setting, the fan runs continuously, regardless of whether the heating or cooling system is actively operating. This can help with air circulation.
4.3 Ajuste de temperatura
Adjust the temperature slider to your desired temperature. The thermostat will maintain the room temperature at this setting based on the selected system mode (Heat or Cool).
Figure 3: The Honeywell Home CT51N Thermostat seamlessly integrated into a contemporary room setting.
5. Mantenimiento
The Honeywell Home CT51N thermostat requires minimal maintenance.
- Limpieza: Limpie periódicamente el exterior del termostato con un paño suave y húmedo.amp paño para quitar el polvo y la suciedad. No utilice limpiadores abrasivos ni disolventes.
- Sin pilas: Este termostato no necesita pilas para funcionar.
6. Solución de problemas
Si tiene problemas con su termostato, consulte los siguientes pasos comunes de solución de problemas:
| Problema | Posible causa | Solución |
|---|---|---|
| System does not turn on (heating or cooling) | No power to the system; System switch in 'Off' position; Incorrect wiring | Check circuit breaker/fuse; Ensure system switch is set to 'Heat' or 'Cool'; Verify wiring connections are secure and correct. |
| La lectura de la temperatura parece inexacta | Thermostat located near heat source or draft; Internal sensor obstruction | Relocate thermostat if possible; Ensure no objects are blocking airflow to the thermostat. |
| Fan does not run in 'On' mode | Fan motor issue; Wiring problem | Check fan wiring; Consult an HVAC professional if the fan motor is suspected. |
| El sistema funciona continuamente o no funciona en absoluto | Faulty thermostat; Wiring issue | Verify wiring; If problem persists, the thermostat may need replacement. |
If these steps do not resolve the issue, contact a qualified HVAC technician for assistance.
7. Especificaciones
| Especificación | Detalle |
|---|---|
| Marca | Hogar Honeywell |
| Nombre del modelo | CT51N |
| Tipo de controlador | Control manual |
| Característica especial | Vol bajotage |
| Color | Blanco |
| Usos específicos del producto | Bomba de calor |
| Tipo de control de temperatura | Calefacción y refrigeración |
| Tecnología de conectividad | N/A (Manual) |
| Componentes incluidos | Thermostat and instruction manual |
| Fuente de poder | System Power (No Batteries Required) |
| Peso del artículo | 3.2 onzas |
| Dimensiones del producto | 2.88 x 1.38 x 4.75 pulgadas |
| Material | Plástico |
| Tipo de pantalla | Manual |
| Tipo de montaje | Montaje en pared |
| Código Postal | 085267271196 |
| Número de modelo del artículo | CT51N1007 |
8. Garantía y soporte
8.1 Información de garantía
This Honeywell Home CT51N thermostat comes with a 1-year limited warranty. Please retain your proof of purchase for warranty claims.
8.2 Atención al cliente
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please refer to the contact information provided with your product packaging or visit the official Honeywell Home support websitio.
