TITAN 1/2 HP Mid-Duty Garbage Disposal System

Introducción

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new TITAN 1/2 HP Mid-Duty Food Waste Disposer. Please read all instructions carefully before beginning installation or use. Retain this manual for future reference.

Información de seguridad

ADVERTENCIA: Improper installation or operation can lead to personal injury or property damage. Always disconnect power before servicing or installing the unit.

• Lea todas las instrucciones detenidamente antes de la instalación y el uso.
• Use gafas de seguridad durante la instalación.
• Asegúrese de que la fuente de alimentación esté desconectada en el disyuntor antes de realizar la instalación o el mantenimiento.
• Do not insert hands or foreign objects into the disposal opening.
• Always run cold water when operating the disposal.

Configuración e instalación

The TITAN 1/2 HP Mid-Duty Food Waste Disposer features a standard 3-bolt mounting system for straightforward installation and replacement. It is designed to replace most garbage disposal brands using similar 3-bolt mounting systems.

Componentes incluidos:

• Food Waste Disposer Unit
• Protector contra salpicaduras extraíble
• Brida de fregadero de acero inoxidable
• Tapón
• Cable de alimentación (adjunto)
• Drain Outlet Elbow and Elbow Screws
• Brida de codo

Pasos de instalación:

1. Prepare Sink Opening: Ensure the sink opening is clean and free of debris. If replacing an old disposal, remove the existing unit and mounting assembly.
2. Install Sink Flange: Apply plumber's putty around the underside of the stainless steel sink flange and press it firmly into the sink drain opening.
3. Assemble Mounting Ring: From underneath the sink, slide the fiber gasket, backup flange, and mounting ring onto the sink flange. Secure with the snap ring. Tighten the three mounting screws evenly to create a watertight seal.
4. Connect Dishwasher Drain (if applicable): If connecting a dishwasher, remove the knockout plug from the dishwasher inlet on the disposal unit. Secure the dishwasher hose to the inlet using a hose clamp.
5. Attach Disposal Unit: Align the three mounting tabs on the disposal unit with the mounting ring. Lift and twist the disposal unit clockwise until it locks into place. Use pliers or a specialized wrench to ensure a secure lock.
6. Connect Drain Plumbing: Attach the drain outlet elbow to the disposal unit using the provided elbow flange and screws. Connect the elbow to your existing household drain plumbing. Ensure all connections are tight to prevent leaks.
7. Conecte la electricidad: The unit comes with an attached 120V power cord. Plug the disposal into a grounded outlet.
8. Prueba de fugas: Run cold water into the sink and check all connections for leaks.

Figure 1: TITAN Garbage Disposal with Labeled Components

Figure 2: Included Installation Components

Figura 3: Instalación típica debajo del fregadero

Instrucciones de funcionamiento

The TITAN garbage disposal is a continuous feed unit, allowing food waste to be added while it is running.

1. Abra el grifo de agua fría con un flujo moderado.
2. Flip the disposal switch to the ON position.
3. Scrape food waste into the disposal opening. The Torque Master grinding system, with its stainless steel impellers, efficiently grinds coffee grounds, vegetable scraps, peelings, and small bones into fine particles.
4. Allow the disposal to run until all food waste is cleared and only the sound of water and the motor is heard.
5. Turn off the disposal, then turn off the cold water after a few seconds to flush the drain line.

Mantenimiento

El mantenimiento regular garantiza un rendimiento óptimo y la longevidad de su triturador de basura.

• Limpieza: The removable rubber splash guard baffle can be easily removed for cleaning. Clean it regularly to prevent odor buildup.
• Control de olores: To help control odors, grind citrus peels (lemon, orange) or a small amount of ice cubes with cold water.
• Avoid Grease: Do not pour grease or oil down the disposal, as it can solidify and clog pipes.

Solución de problemas

If your disposal is not operating correctly, refer to the following common issues and solutions:

• Disposal Not Starting:
         a. Check if the unit is plugged in securely.
         b. Press the red reset button located on the front bottom of the disposal unit (see Figure 1).
         c. Check your household circuit breaker.
• Tarareando pero no moliendo:
         a. This indicates an object is jammed in the grinding chamber. Turn off the disposal and disconnect power.
         b. Use a flashlight to look into the drain opening. If an object is visible, remove it with tongs or pliers. Never use your hand.
         c. If no object is visible, use the provided hex wrench (or a 1/4 inch hex wrench) to insert into the center hole on the bottom of the disposal and turn it back and forth to free the impellers.
• Fugas:
         a. Check all plumbing connections for tightness.
         b. Inspect the sink flange for proper sealing; re-tighten mounting screws if necessary.

Presupuesto

Figura 4: Dimensiones del producto

Garantía

The TITAN 1/2 HP Mid-Duty Garbage Disposal System comes with a Garantía de 5 años. During the warranty period, a defective or inoperative disposer will be replaced by the manufacturer at no charge to the consumer/purchaser. An original sales receipt is required for warranty claims. Costs of service labor for installation will be the consumer’s responsibility.

Apoyo

For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact TITAN customer support. Refer to your product packaging or the official TITAN webSitio para obtener información de contacto actualizada.