Producto terminadoview
The Oster Professional 103 Stim-U-Lax Massager is a heavy-duty, single-speed device designed for professional and personal use. It provides a refreshing and energizing massage, ideal for use after cutting services or for general muscle relaxation.
- Made of 100% ball bearing construction for durability.
- Traditional frame design with a special contour to fit the hand and reduce fatigue during use.
- Features a chrome housing and a comfortable rubber hand pad.
- Heavy-duty, single speed operation.
- Operates on 120 volts, 60 Hz, AC.
Información importante de seguridad
Before operating this device, please read and understand all safety instructions. Improper use can result in injury or damage to the product.
Aviso legal: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. This product is intended for massage purposes only.
- Desenchufe siempre el masajeador de la toma de corriente inmediatamente después de usarlo y antes de limpiarlo.
- No lo use mientras se baña o ducha.
- No coloque ni guarde el masajeador en un lugar donde pueda caerse o ser arrastrado a una bañera o lavabo.
- No lo coloque ni lo deje caer dentro del agua ni de ningún otro líquido.
- Nunca opere este aparato si tiene un cable o enchufe dañado, si no funciona correctamente, si se ha caído o dañado o se ha caído al agua.
- Mantenga el cable alejado de superficies calientes.
- Never use on swollen or inflamed areas or skin eruptions.
- Consult your doctor before using this massager if you have any medical conditions.
Configuración
The Oster Professional 103 Stim-U-Lax Massager is designed for ease of use. Follow these steps for initial setup:
- Deshacer: Carefully remove the massager from its packaging. Retain packaging for future storage or transport.
- Inspeccionar: Check the device for any visible damage. Ensure the power cord and plug are intact.
- Colocación: The massager is designed to be held in hand. Ensure a comfortable grip before operation.
- Conexión de energía: Plug the massager into a standard 120-volt, 60 Hz AC electrical outlet.
Instrucciones de funcionamiento
The Stim-U-Lax Massager provides a powerful, invigorating massage. Its lightweight and ergonomic contoured design helps reduce hand fatigue during extended use.
- Sostener: Securely hold the massager by placing your hand through the straps, ensuring a firm and comfortable grip.
- Activar: Locate the power switch, typically a toggle switch, and flip it to the "ON" position. The massager will begin to vibrate.
- Aplicar: Gently apply the vibrating surface of the massager to the desired area of the body. Move the massager in slow, circular motions or back and forth, depending on the area and desired effect.
- Duración: Use for short periods, typically 5-15 minutes per area, or as recommended by a professional. Avoid prolonged use on a single spot.
- Desactivar: When finished, flip the power switch to the "OFF" position.
- Desconectar: Unplug the massager from the electrical outlet.
This massager is particularly effective for providing a refreshing, energizing massage following any cutting service, or for general muscle relaxation.
Mantenimiento
Proper maintenance ensures the longevity and optimal performance of your Oster Professional 103 Stim-U-Lax Massager.
- Limpieza: Always unplug the massager before cleaning. Wipe the exterior surfaces with a soft, damp Paño. No utilice limpiadores abrasivos ni sumerja la unidad en agua.
- Almacenamiento: Store the massager in a cool, dry place, away from direct sunlight and moisture. Coil the power cord loosely to prevent damage.
- Inspección: Inspeccione periódicamente el cable de alimentación y el enchufe para detectar cualquier signo de desgaste o daño. Si encuentra algún daño, deje de usarlo y contacte con atención al cliente.
Solución de problemas
If you encounter issues with your massager, refer to the following common troubleshooting steps:
| Problema | Posible causa | Solución |
|---|---|---|
| El masajeador no se enciende. | Not plugged in; power switch is off; power outlet is not working; internal fault. | Ensure the massager is securely plugged into a live electrical outlet. Check the power switch is in the "ON" position. Test the outlet with another appliance. If the issue persists, contact customer support. |
| Vibración débil. | Vol bajotage; internal component issue. | Ensure the massager is connected to a stable power source. Avoid using with extension cords that may cause voltage drop. If the problem continues, contact customer support. |
| Ruido o olor inusual. | Mal funcionamiento interno. | Immediately turn off and unplug the massager. Do not attempt to repair. Contact customer support for assistance. |
Presupuesto
| Característica | Detalle |
|---|---|
| Número de modelo | 76103 |
| Fuente de poder | 120 Volts, 60 Hz, AC |
| Construcción | 100% Ball Bearing |
| Material de la carcasa | Cromo |
| Hand Pad Material | Goma |
| Dimensiones del producto | 1 x 1 x 1 pulgadas |
| Peso del artículo | 2.6 libras |
| Fabricante | Oster |
| Primera fecha disponible | 2 de enero de 2004 |
Imágenes del producto
Vídeos oficiales de productos
There are currently no official product videos from the manufacturer available for embedding in this manual.
Garantía y soporte
For warranty information, technical support, or to inquire about replacement parts, please contact Oster customer service. Keep your purchase receipt and product model number (76103) handy when contacting support.
Contact details can typically be found on the product packaging or the official Oster websitio.
