ONETOUCH Jar Opener

Introducción

The ONETOUCH Jar Opener KGQ-OF0002 is an innovative kitchen gadget designed to simplify the task of opening stubborn jar lids. This automatic device provides a hands-free solution, making it ideal for individuals with limited hand strength, arthritis, or anyone seeking convenience in the kitchen. With a simple touch, the opener securely grips the jar and lid, then effortlessly twists to break the seal, opening jars with 1-inch to 4-inch diameter lids.

Información importante de seguridad

• Lea todas las instrucciones antes de utilizar el aparato.
• Mantenga las manos y la ropa suelta alejadas de las piezas móviles durante el funcionamiento.
• No sumerja la unidad en agua u otros líquidos.
• Asegúrese de que el compartimento de la batería esté bien cerrado antes de utilizarlo.
• Este dispositivo está diseñado para uso doméstico únicamente.

Contenido del paquete

Your ONETOUCH Jar Opener package should contain:

• 1 x ONETOUCH Jar Opener Unit
• 1 x Manual de instrucciones

Configuración

Before first use, install two AA batteries (not included) into the unit.

1. Localice el compartimiento de la batería en la parte inferior de la unidad.
2. Deslice la tapa del compartimento de la batería para abrirla.
3. Inserte dos pilas AA, asegurándose de la polaridad correcta (+/-).
4. Replace the battery compartment cover securely. The unit will not operate if the cover is not properly closed.

Image: The battery compartment of the jar opener is shown, with a hand inserting batteries. This illustrates the battery installation process.

Instrucciones de funcionamiento

Follow these steps to open a jar using your ONETOUCH Jar Opener:

1. Place the jar on a flat, non-slip surface.
2. Position the ONETOUCH Jar Opener on top of the jar lid. Ensure the inner clamps are centered over the lid and the outer clamps are positioned around the jar body.
3. Press and hold the green button on top of the opener for 3 to 15 seconds. The opener will automatically adjust its clamps to grip both the lid and the jar.
4. Una vez que el clamps are secure, the opener will begin to twist the lid counter-clockwise until the seal is broken and the lid is loosened.
5. The opener will automatically stop and release the jar and lid once the opening process is complete.
6. Carefully remove the opener from the jar and lift off the loosened lid.

Image: The automatic jar opener is shown placed on a jar, illustrating its readiness to open the lid.

Mantenimiento

To ensure the longevity and optimal performance of your ONETOUCH Jar Opener:

• Limpie la unidad con adamp paño después de cada uso.
• No utilice limpiadores abrasivos ni sumerja la unidad en agua.
• Conservar en un lugar seco cuando no esté en uso.

Solución de problemas

• La unidad no funciona: Ensure two fresh AA batteries are correctly installed and the battery compartment cover is securely closed.
• Jar opener slips: Ensure the jar and lid are clean and dry. Any oil or residue can cause slippage. The opener is designed for glass jars and cannot be used on plastic cans.
• Lid not opening: The opener is designed for lids with an opening range of 1 to 2.3 inches at the mouth and 1.3 to 3.5 inches at the body. Ensure your jar falls within these dimensions.

Presupuesto

Garantía y soporte

The ONETOUCH Jar Opener comes with a 12-month warranty. For any inquiries, support, or warranty claims, please contact the seller directly. Refer to the product packaging or included documentation for specific contact details.