1. Introducción
The Lutron FG-2-TD-WH Fassada 2-Gang Combination Wall Plate is designed to provide a clean and seamless finish for your electrical installations. This wall plate features one traditional toggle opening and one designer opening, making it versatile for various switch and dimmer types. Its gloss white finish and screwless design enhance the aesthetic appeal of any room.
Image: Lutron FG-2-TD-WH Fassada 2-Gang Combination Wall Plate in white gloss finish.
Características principales:
- Features one traditional and one designer opening for versatile use.
- Compatible with controls and accessories with traditional openings (e.g., toggle switches) and designer openings (e.g., paddle switches, dimmers).
- Superior Snap-On design ensures secure and snug attachment, regardless of wall condition.
- Reversible design allows rotation for small/large or large/small opening applications.
- Screwless, seamless design with no visible hardware for a clean, modern look.
2. Información de seguridad
ADVERTENCIA: Riesgo de descarga eléctrica. Improper installation can result in serious injury or death. Always turn off power at the circuit breaker or fuse box before installing or servicing any electrical device. If you are unsure about any part of these instructions, consult a qualified electrician.
- Asegúrese de que la energía esté apagada en el disyuntor antes de comenzar la instalación.
- Use appropriate tools and follow all local and national electrical codes.
- Do not install if the wall box is damaged or has exposed wires.
3. Contenido del paquete
- 1x Lutron FG-2-TD-WH Fassada 2-Gang Combination Wall Plate (White)
4. Herramientas necesarias
- Screwdriver (Phillips and/or Flathead, depending on existing screws)
- Pliers (optional, for wire manipulation)
- Volumentage Tester (recomendado por seguridad)
5. Instrucciones de instalación
This section provides general guidance for installing the wall plate. For detailed wiring instructions for specific switches or dimmers, please refer to the instructions provided with those devices.
General Wall Plate Installation:
- Apagar la energía: Locate the circuit breaker controlling the switch or outlet you are working on and turn it OFF. Verify power is off using a voltage probador.
- Retire la placa de pared vieja: Carefully unscrew and remove the existing wall plate and any sub-plate.
- Install Electrical Device (if applicable): If you are installing a new switch or dimmer, follow its specific wiring instructions. Ensure the device is securely mounted to the wall box.
- Attach Sub-Plate (if applicable): Some devices may come with a sub-plate that attaches directly to the electrical device. Install this first if required.
- Instalar nueva placa de pared: Align the Lutron Fassada wall plate over the installed electrical device(s) and sub-plate (if present). Gently press the wall plate firmly until it snaps securely into place. The screwless design means no visible hardware.
- Restaurar energía: Once the wall plate is securely installed, turn the power back ON at the circuit breaker.
Referencia de video de instalación:
The following video demonstrates the snap-on installation of a Lutron wall plate. While it may feature a different specific device, the wall plate installation method is similar.
Video: Quick Wallplate Installation. This video demonstrates the simple snap-on installation process for a Lutron wall plate, highlighting how it securely attaches over an electrical device.
6. Operación
The Lutron Fassada wall plate is a passive component designed to cover and protect electrical devices. Its operation is directly tied to the functionality of the switches, dimmers, or outlets it houses. Ensure that the devices installed within the wall plate openings are functioning correctly after installation.
7. Mantenimiento
To maintain the appearance and functionality of your Lutron Fassada wall plate:
- Limpieza: Limpie la superficie con un paño suave, damp paño. Evite limpiadores abrasivos, disolventes o productos químicos fuertes, ya que pueden dañar el acabado.
- Inspección: Periodically check the wall plate for any signs of damage or loose fit. If the plate becomes loose, gently press it back into place.
8. Solución de problemas
- Wall Plate Does Not Snap On Securely:
- Ensure the electrical device(s) are properly seated and flush with the wall box.
- Check for any obstructions or excess wiring within the wall box that might prevent the plate from sitting flush.
- Verify that the correct sub-plate (if any) is installed and aligned.
- Electrical Device Not Functioning:
- Apague la energía en el disyuntor.
- Remove the wall plate and check the wiring connections of the electrical device. Refer to the device's specific installation instructions.
- Asegúrese de que el disyuntor esté encendido.
9. Especificaciones
| Atributo | Detalle |
|---|---|
| Número de modelo | FG-2-TD-WH |
| Marca | Lutron |
| Configuración | 2-Gang (1 Traditional, 1 Designer) |
| Color | Blanco |
| Tipo de acabado | Acabado brillante |
| Material | Either Plastic or Metal |
| Tipo de instalación | Snap-On |
| Dimensiones del producto | 4.67 x 5.9 x 4.6 pulgadas |
| Peso del artículo | 2.4 onzas |
| Código Postal | 027557554404 |
10. Garantía y soporte
Lutron products are designed for quality and reliability. For specific warranty information, please refer to the documentation included with your product or visit the official Lutron websitio.
Atención al cliente:
Lutron offers 24/7 support to assist with any questions or issues you may encounter.
- Soporte telefónico: 844-588-7661
- Websitio: lutron.com
Support Video Reference:
Mire este video para obtener más información.view of Lutron's dedicated customer support.
Video: Lutron 24/7 Support. This video highlights the availability of Lutron's customer support team for assistance with their products.
