1. Introducción
BAYROL pH Minus Granules are specifically formulated to quickly and effectively lower high pH levels in swimming pool water. Maintaining an optimal pH balance (typically between 7.0 and 7.4) is critical for the efficiency of pool disinfectants, such as chlorine, and for ensuring a comfortable and safe swimming environment. This product is a fast-dissolving acid granule of high chemical purity, designed to prevent additional corrosion that might occur with other pH-reducing agents like hydrochloric acid.
Image: The 6 kg container of BAYROL pH Minus Granules, showcasing the product label and branding.
2. Información de seguridad
Importante: Always use biocidal products carefully. Always read the label and product information before use.
2.1. Advertencias
- H318: Provoca lesiones oculares graves.
2.2. Precautionary Statements
- P101: Si necesita consejo médico, tenga a mano el envase o la etiqueta del producto.
- P102: Mantener fuera del alcance de los niños.
- P280: Utilice guantes protectores/protección para los ojos/protección para la cara.
- P305 + P351 + P338: EN CASO DE CONTACTO CON LOS OJOS: Enjuagar cuidadosamente con agua durante varios minutos. Quitar las lentes de contacto, si están presentes y resulta fácil hacerlo. Continuar enjuagando.
- P308 + P311: IF exposed or concerned: Call a POISON CENTER/doctor.
- P501: Eliminar el contenido/el recipiente en una planta de eliminación de residuos aprobada.
2.3. Descargo de responsabilidad
This product is intended solely for pool water treatment. The manufacturer is not liable for damages resulting from improper use or failure to adhere to the provided instructions. Always ensure proper ventilation when handling chemicals.
3. Configuración y preparación
Before using BAYROL pH Minus Granules, ensure you have the necessary safety equipment, including protective gloves and eye protection. Always store the product in its original container, in a cool, dry place, away from direct sunlight and out of reach of children and pets.
- Ensure the pool circulation pump is running during dosage.
- Measure the current pH level of your pool water using a suitable test kit. The ideal pH range for pool water is typically between 7.0 and 7.4.
4. Instrucciones de funcionamiento
4.1. Dosis
To lower the pH value by 0.1, 100 g of pH-Minus are required per 10 m³ of pool water.
- Determine the required amount of pH Minus Granules based on your pool volume and the desired pH reduction.
- Using the included measuring spoon, accurately measure the required quantity of granules.
- Distribute the measured dosage evenly into the pool water at several points while the circulation pump is running.
- Allow the pool water to circulate for at least 2-4 hours after adding the product.
- Re-test the pH level after circulation to ensure the desired level has been reached. If necessary, repeat the dosage process in smaller increments until the optimal pH is achieved.
Image: The BAYROL pH Minus Granules container alongside the included measuring spoon, illustrating the ease of accurate dosage.
Image: The BAYROL pH Minus Granules container placed next to a swimming pool, illustrating its intended use environment.
5. Mantenimiento
Regular monitoring of your pool's pH level is essential for effective water treatment and swimmer comfort. It is recommended to check the pH level at least once a week, or more frequently during periods of heavy use or after significant rainfall.
- Store the product in a tightly sealed container in a cool, dry, and well-ventilated area.
- Keep the measuring spoon clean and dry after each use.
- Ensure the product does not come into contact with other chemicals, especially strong acids or bases, unless specifically instructed.
6. Solución de problemas
6.1. pH Level Not Decreasing
- Insufficient Dosage: Ensure you are using the correct amount of pH Minus Granules based on your pool volume and the current pH level. Re-calculate and add more if necessary.
- Poor Circulation: Verify that your pool's circulation pump is running effectively and that the product is being distributed evenly throughout the water.
- Water Alkalinity: High total alkalinity (TA) can buffer pH changes. If pH is difficult to adjust, check your pool's TA level.
6.2. Granules Not Dissolving
- Insufficient Water Movement: Ensure the circulation pump is running.
- Aglutinación: If granules clump, gently break them apart or pre-dissolve them in a bucket of pool water before adding to the main pool.
7. Especificaciones técnicas
| Característica | Especificación |
|---|---|
| Marca | Bayrol |
| Número de modelo | 11 94112 |
| ASIN | B001982CIA |
| Dimensiones del producto | 23 x 22 x 22 cm (9.06 x 8.66 x 8.66 pulgadas) |
| Peso del artículo | 6 kilogramos (13.23 libras) |
| Forma | Granular |
| Código Postal | 799554930221 |
| Key Product Benefit | Prevents corrosion, ensures chlorine effectiveness, enhances swimming comfort |
8. Garantía y soporte
Specific warranty information for BAYROL pH Minus Granules is not provided in the product details. For any product-related inquiries, technical support, or concerns, please contact Bayrol customer service directly or refer to their official websitio para información de contacto.
You can visit the official Bayrol store on Amazon for more information: Bayrol Store
