1. Producto terminadoview
This manual provides instructions for the SINGER Foot Controller and Power Cord, Model 359102001. This unit serves as a combined foot pedal and power supply for compatible SINGER sewing machines, enabling control over sewing speed and providing electrical power.
1.1. Características principales
- Integrated foot controller and power cord.
- Genuine SINGER replacement part.
1.2. Compatible SINGER Sewing Machine Models
This foot controller and power cord is compatible with the following SINGER sewing machine models:
- Cantante 1105
- Cantante 1116
- Cantante 1120
- Cantante 1130
- Cantante 118
- Cantante 1525
- Cantante 1725
- Cantante 1748
- Cantante 2639
- Cantante 2662
- Cantante 2712
- Cantante 2722
- Cantante 2732
- Cantante 2718
- Cantante 2724
- Cantante 2730
- Singer 3116 Simple
- Cantante 3709
- Cantante 3722
- Cantante 3810
- Cantante 3820
- Cantante 3825
- Cantante 3962
- Cantante 4102
- Singer 4205 Inspiration
- Singer 4206 Inspiration
- Singer 4210 Inspiration
- Singer 4212 Inspiration
- Singer 4220 Inspiration
- Singer 4228 Inspiration
- Cantante 6510
- Cantante 6550
- Cantante 7312
- Cantante 7322
- Cantante 7350
- Singer 14T98DS
2. Instrucciones de configuración
Follow these steps to properly connect the foot controller and power cord to your SINGER sewing machine.
2.1. Connecting the Foot Controller to the Sewing Machine
- Identificar el puerto del conector: Locate the power and foot controller input port on your SINGER sewing machine. This port typically has three holes designed to receive the three-pin connector of the foot controller.
- Alinee el conector: Take the three-pin connector end of the foot controller cord. Carefully align the three pins with the corresponding holes in the sewing machine's input port. Ensure the connector is oriented correctly to avoid bending the pins.
- Insertar el conector: Gently push the connector firmly into the port until it is fully seated. Do not force the connection.
Image: Three-pin connector for the sewing machine input.
Image: Connector dimensions for proper fit.
2.2. Connecting to Power Outlet
- Ensure Machine is Off: Before plugging into a power outlet, ensure your sewing machine's power switch is in the OFF position.
- Enchufe al tomacorriente: Insert the two-prong power plug into a standard electrical wall outlet. Ensure the outlet provides the correct voltage (120V AC for North American models).
Image: Power plug with voltagy especificaciones.
Image: Complete foot controller and power cord assembly.
Image: SINGER Foot Controller and Power Cord.
3. Instrucciones de funcionamiento
Once the foot controller is properly connected, you can begin operating your sewing machine.
3.1. Controlling Sewing Speed
- Encender la máquina: Flip the power switch on your sewing machine to the ON position. The machine's light may illuminate.
- Aplicar presión: Place your foot on the foot pedal. The sewing machine's speed is directly controlled by the amount of pressure you apply to the pedal.
- Aumentar la velocidad: Press down gently for slower speeds. Increase pressure for faster sewing speeds.
- Dejar de coser: Release pressure from the pedal to stop the machine.
4. Cuidado y mantenimiento
Proper care ensures the longevity and reliable performance of your foot controller.
- Limpieza: Wipe the foot controller and cord with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no liquids enter the pedal mechanism.
- Almacenamiento: When not in use, store the foot controller and cord in a clean, dry place, away from direct sunlight and extreme temperatures. Avoid kinking or tightly wrapping the cord.
- Inspección: Periodically inspect the cord for any signs of damage, such as fraying, cuts, or exposed wires. If damage is observed, discontinue use and replace the unit.
5. Solución de problemas
If you encounter issues with your foot controller, refer to the following common problems and solutions.
5.1. Sewing Machine Does Not Power On
- Comprobar conexiones: Ensure the three-pin connector is fully inserted into the sewing machine's port and the power plug is securely in the wall outlet.
- Verifique el poder: Test the wall outlet with another appliance to confirm it is receiving power. Check your home's circuit breaker if necessary.
- Machine Power Switch: Confirm the sewing machine's power switch is in the ON position.
5.2. No Speed Control or Machine Runs at Full Speed
- Pedal Functionality: Ensure the foot pedal mechanism moves freely and returns to its resting position when pressure is released.
- Problema interno: If the machine consistently runs at full speed or has no speed variation despite pedal pressure, there may be an internal issue with the foot controller or the sewing machine itself. Consider contacting SINGER customer support or a qualified technician.
5.3. Intermittent Power or Operation
- Daño del cable: Inspect the entire length of the power cord and foot controller cord for any visible damage, such as cuts, kinks, or exposed wiring. Damaged cords can cause intermittent power.
- Conexiones sueltas: Re-seat all connections, ensuring they are firm and secure.
6. Especificaciones del producto
| Especificación | Detalle |
|---|---|
| Marca | SINGER |
| Número de modelo | 359102001 |
| Dimensiones del producto | 6.1 x 4.7 x 2.1 pulgadas |
| Peso del artículo | 10.6 onzas |
| Material | Plástico |
| Fabricante | Cantante |
| ASIN | B002L2Z73A |
| Código Postal | 798804837419, 037431889041 |
| Pilas necesarias | No |
7. Garantía y soporte
For warranty information or technical support regarding your SINGER Foot Controller and Power Cord, please refer to the documentation included with your original sewing machine or visit the official SINGER websitio.
You can also contact SINGER customer service directly for assistance with product-specific inquiries or troubleshooting beyond the scope of this manual.
