Introducción
Welcome to the world of freshly ground and brewed coffee with your new Capresso CoffeeTeam TS 10-Cup Digital Coffeemaker. This appliance combines a powerful conical burr grinder with a programmable drip coffeemaker and a durable thermal carafe, ensuring a rich, flavorful cup every time. This manual provides essential information for setup, operation, maintenance, and troubleshooting to help you get the most out of your coffeemaker.
Información importante de seguridad
Before operating your Capresso CoffeeTeam TS, please read all safety instructions thoroughly. A detailed Safety Information PDF is available for your reference. Always ensure the appliance is unplugged before cleaning or performing maintenance.
Producto terminadoview y componentes
Familiarize yourself with the main parts of your coffeemaker:
- Tolva de frijoles: Contiene granos de café enteros para moler.
- Molinillo de muelas cónicas: Grinds beans to your desired coarseness.
- Feeder Channel: Directs ground coffee to the filter basket.
- Panel de control: Features an LCD display, ON/OFF, PROG, MODE, BREW, GRIND/BREW, 2-10, AROMA, FILTER, H, and M buttons.
- Cesta de filtro: Holds the permanent GoldTone filter or paper filter.
- Jarra térmica: Stainless steel carafe designed to keep coffee hot for hours without a warming plate.
- Tanque de agua: Reservoir for water, with clear level markings.

Figura 1: Angulado view of the Capresso CoffeeTeam TS, showing the bean hopper, control panel, and thermal carafe.

Figura 2: Arriba view illustrating the detachable see-through cover on the coffee grinder, allowing access to the burr grinder and feeder channel.
Configuración y primer uso
- Desembalaje: Retire con cuidado todos los materiales de embalaje y asegúrese de que todos los componentes estén presentes.
- Limpieza inicial: Before first use, clean the thermal carafe, filter basket, and permanent GoldTone filter with warm water and mild detergent. Rinse thoroughly.
- Feeder Channel Preparation: As per manufacturer instructions, ensure the GoldTone filter is inserted in the Filter Insert. With a pointed tip, push the small pin in the window down and slide the plastic cover forward. Wipe the inside clean with a dry cloth, removing any remnants from the feeder channel. Replace the feeder channel cover.
- Llenado de agua: Fill the water tank with fresh, cold water up to the desired cup marking. Do not overfill.
- Bean Fill (for Grind & Brew): Add whole coffee beans to the bean hopper. The hopper can hold enough beans for a full 10-cup brew.
- Colocación del filtro: Place the clean GoldTone filter (or a paper filter) into the filter basket.
- Primer ciclo de preparación (sin café): Run a full brew cycle with only water to clean the internal components. Discard the water after the cycle.
Instrucciones de funcionamiento
The Capresso CoffeeTeam TS offers versatile brewing options:
Grind & Brew Function
This function allows the coffeemaker to automatically grind whole beans and then brew coffee.
- Ensure water is in the tank and beans are in the hopper.
- Presione el MODO button until the 'GRIND/BREW' indicator light is illuminated.
- Utilice el 2-10 button to select the number of cups you wish to grind (this determines the amount of coffee ground, not necessarily the final brewed volume).
- Presione el AROMA button to adjust coffee strength (light, medium, dark).
- Presione el ENCENDIDO/APAGADO button to start the brewing process. The coffeemaker will first grind the selected amount of beans, then proceed with brewing.
Brew Only Function (for Pre-Ground Coffee)
Si prefieres utilizar café premolido, sigue estos pasos:
- Add desired amount of pre-ground coffee to the filter basket.
- Presione el MODO button until the 'BREW' indicator light is illuminated.
- Presione el ENCENDIDO/APAGADO para comenzar a preparar la cerveza.
Programming for Automatic Brewing
Set the coffeemaker to automatically brew at a specific time:
- Configure la hora actual usando el H (Hora) y M (Minute) buttons.
- Presione el PROG Botón. La pantalla mostrará 'PROG'.
- Utilice el H y M Botones para configurar el tiempo de preparación deseado.
- Select 'GRIND/BREW' or 'BREW' mode and the desired cup amount/aroma settings.
- Presione el PROG button again to confirm. The 'PROG' indicator light will remain on.
Función de tomar una taza a escondidas
The thermal carafe can be removed during the brewing cycle to pour a cup of coffee. The drip stop mechanism will temporarily halt the flow of coffee. Replace the carafe within 20 seconds to prevent overflow.

Figure 3: The Capresso CoffeeTeam TS in a kitchen environment, ready to brew fresh coffee.
Vídeo 1: Un finalview of the Capresso 465 CoffeeTeam TS 10-Cup Digital Coffeemaker with Conical Burr Grinder and Thermal Carafe, highlighting its key features and operation.
Mantenimiento
Limpieza
La limpieza regular garantiza un rendimiento y un sabor óptimos:
- Jarra y cesta de filtro: Wash daily with warm, soapy water. The thermal carafe is not dishwasher safe.
- Feeder Channel: The manufacturer recommends regular cleaning of the feeder channel to prevent clogs, especially with oily beans. To clean, ensure the GoldTone filter is inserted. With a pointed tip, push the small pin in the window down and slide the plastic cover forward. Wipe the inside clean with a dry cloth, removing any remnants. Replace the feeder channel cover.
- Exterior: Limpie el exterior con publicidad.amp Paño. No sumerja la cafetera en agua.
Descalcificación
Mineral deposits from water can affect performance and taste. Descale your coffeemaker regularly (e.g., every 2-4 months, depending on water hardness). Use a commercial descaling solution or a mixture of white vinegar and water (1 part vinegar to 2 parts water). Run a brew cycle with the descaling solution, then run several cycles with fresh water to rinse thoroughly.
Solución de problemas
If you encounter issues with your coffeemaker, refer to the following common problems:
- El café no se prepara: Check if the unit is plugged in, the water tank is filled, and the carafe is correctly placed.
- La amoladora no funciona: Ensure the bean hopper is not empty and the feeder channel is not clogged. Clean the feeder channel as described in the Maintenance section.
- Café débil: Adjust the AROMA setting to a darker bean icon for stronger coffee. Ensure you are using the correct amount of coffee for the water volume.
- Desbordamiento: Do not overfill the water tank. Ensure the carafe is properly seated and the drip stop is not blocked.
For more detailed troubleshooting, please consult the full User Manual PDF.
Presupuesto
- Marca: Café expreso
- Nombre del modelo: CoffeeTeam TS
- Número de modelo: 465.05
- Capacidad: 10 tazas
- Dimensiones (profundidad x anchura x altura): 9" de profundidad x 9.5" de ancho x 15.5" de alto
- Peso: 10 libras
- Volumentage: 110 voltios
- Modo de operación: Completamente automático
- Características especiales: Built-in Conical Burr Grinder, Permanent Filter, Programmable, Thermal Carafe
- Tipo de filtro: Permanent GoldTone Filter (Paper filters can also be used)

Figure 4: Dimensions of the Capresso CoffeeTeam TS coffeemaker.
Garantía y soporte
For warranty information and customer support, please refer to the documentation included with your product or visit the official Capresso website. You can also find contact information for support services there.
Recursos adicionales
For more detailed instructions and information, please refer to the official PDF documents:





