Wilson Antennas T5000 Center Loaded Mobile CB Antenna

Producto terminadoview

The Wilson T5000 is a high-performance center-loaded mobile CB antenna designed for robust communication. It is engineered for exceptional power handling and durability, making it a preferred choice for mobile CB radio users. This antenna is built to withstand various weather conditions and offers flexible installation options.

• Worlds most powerful center loaded mobile CB antenna: Engineered for superior performance.
• 5,000 AM & 20,000 SSB Watts power handling capability (ICAS): Ensures reliable operation with high-power CB radios.
• Includes 5-inch and 10-inch shafts: Provides versatility for different mounting requirements.
• Weather-band ready: Capable of receiving weather band broadcasts.
• AM/FM Ready | Optimized for Maximum Performance: Designed for broad compatibility and efficiency.

Configuración e instalación

Proper installation is crucial for the optimal performance of your Wilson T5000 antenna. Follow these guidelines carefully.

Componentes incluidos:

• Wilson T5000 Center Loaded Mobile CB Antenna
• 5-inch shaft
• 10-inch shaft
• 49-inch 17-7PH tapered spring stainless-steel whip

Montaje de la antena:

The T5000 antenna is designed for mobile applications, typically mounted on vehicles. Ensure a secure and stable mounting location, such as a mirror mount or a magnetic mount base. The antenna includes both 5-inch and 10-inch shafts to accommodate various mounting heights and vehicle types.

Figure 1: Wilson T5000 Center Loaded Mobile CB Antenna with included 5-inch and 10-inch shafts.

Figura 2: Example of the Wilson T5000 antenna mounted on a truck, demonstrating typical mobile installation.

Toma de tierra:

Proper grounding is essential for optimal antenna performance and to minimize interference. Ensure your antenna mount has a solid electrical connection to the vehicle's chassis or frame. In some cases, running additional 12-AWG wire grounds may be beneficial to ensure a robust ground connection.

Ajuste de ROE:

After installation, it is critical to tune the antenna for the lowest Standing Wave Ratio (SWR). This process involves adjusting the insertion depth of the whip into its mounting hole. A low SWR (ideally below 1.5:1 across the band) ensures maximum power transfer from your CB radio to the antenna and prevents damage to your radio. Use an SWR meter or an antenna tuner for accurate adjustment.

Precaución: The set screws securing the whip can be soft. Exercise extreme care during the tuning process to avoid stripping the inner hex (allen) slot.

Instrucciones de funcionamiento

Once installed and tuned, the Wilson T5000 antenna is ready for operation with your CB radio.

• Manejo de potencia: The antenna is rated for 5,000 AM and 20,000 SSB Watts ICAS (Intermittent Commercial and Amateur Service) power handling. Ensure your radio's output power does not exceed these limits to prevent antenna damage.
• Rango de frecuencia: The antenna is optimized for the CB radio frequency band (26.965-27.405 MHz).
• Banda meteorológica: The T5000 is weather-band ready, allowing reception of NOAA weather radio broadcasts if your CB radio supports this feature.
• Rendimiento óptimo: For best results, operate your CB radio within its specified power limits and ensure the antenna remains properly tuned.

Mantenimiento

Regular maintenance will extend the life and performance of your Wilson T5000 antenna.

• Limpieza: Periodically clean the antenna, especially the coil and whip, to remove dirt, grime, and road salt. Use a mild soap and water solution, then rinse thoroughly.
• Inspección: Regularly inspect the antenna for any signs of wear, damage, or loose connections. Check the mounting hardware and coaxial cable for integrity.
• Protección: The high-impact Mobay thermoplastic protects the antenna in various weather conditions. However, avoid physical impacts, such as hitting tree limbs, as this can cause cracks or breaks in the load coil housing.
• Almacenamiento: The removable coil design allows for safe storage and makes it easier to pull into garages or low-clearance areas. When storing the antenna for extended periods, ensure it is clean and dry.

Solución de problemas

Si experimenta problemas con su antena, considere los siguientes pasos de solución de problemas:

• Lecturas de ROE altas:
  • Re-check SWR tuning by adjusting the whip's insertion depth.
  • Verify proper grounding of the antenna mount to the vehicle chassis.
  • Inspect the coaxial cable for kinks, damage, or faulty connectors.
  • Ensure the antenna is not too close to other metal objects on the vehicle that could interfere with its radiation pattern.
• Mala recepción/transmisión:
  • Confirm low SWR. High SWR can significantly reduce performance.
  • Check all connections between the antenna, coaxial cable, and CB radio.
  • Ensure the antenna is mounted in a clear, unobstructed location.
• Loose or Damaged Plastic Housing:
  • If the outer plastic housing turns while tightening the antenna, it may need to be re-glued. Handle gently during installation.
  • Physical damage from impacts (e.g., tree limbs) can crack the housing. While the Mobay thermoplastic is durable, extreme force can cause damage.

Presupuesto

Información de garantía

The Wilson T5000 Center Loaded Mobile CB Antenna comes with a Garantía limitada de 1 años Del fabricante. Esta garantía cubre defectos de materiales y mano de obra en condiciones normales de uso. Conserve su comprobante de compra para reclamaciones de garantía.

For detailed warranty terms and conditions, please refer to the official Wilson Antennas websitio o comuníquese con su servicio de atención al cliente.

Atención al cliente

For further assistance, technical support, or inquiries regarding your Wilson T5000 antenna, please contact Wilson Antennas customer service or visit their official websitio.

Puede encontrar más información y productos en Wilson Store on Amazon.