Introducción
This manual provides comprehensive instructions for the installation, usage, and maintenance of your Phylrich KES25/004 Regent Wall Mounted Soap Dish. Please read this manual thoroughly before installation and retain it for future reference. Proper installation and care will ensure the longevity and optimal performance of your product.
Información de seguridad
- Always turn off the main water supply if working near plumbing lines.
- Utilice equipo de protección personal adecuado, como gafas de seguridad, durante la instalación.
- Ensure the mounting surface is structurally sound and capable of supporting the fixture.
- Tenga cuidado al manipular herramientas para evitar lesiones.
- Mantenga las piezas pequeñas fuera del alcance de los niños para evitar riesgos de asfixia.
Contenido del paquete
Verify that all components are present before beginning installation. If any parts are missing or damaged, contact your retailer or Phylrich customer service.
- Phylrich KES25/004 Regent Wall Mounted Soap Dish Assembly (Brass fixture with Glass dish)
- Mounting Hardware (screws, anchors, mounting plate)
- Plantilla de instalación (si está incluida)
Herramientas necesarias
Normalmente se requieren las siguientes herramientas para la instalación:
- Lápiz
- Cinta métrica
- Nivel
- Drill with appropriate drill bit for anchors
- Screwdriver (Phillips or Flathead, as required by screws)
- Detector de vigas (recomendado para un montaje óptimo)
Configuración e instalación
Follow these steps carefully to install your wall-mounted soap dish:
- Elegir la ubicación: Select a suitable location on the wall, ensuring it is at a convenient height and away from direct water spray if possible. Use a level to ensure the mounting area is straight.
- Puntos de perforación de marcado: Use the provided installation template (if available) or hold the mounting plate against the wall at the desired location. Mark the screw hole positions with a pencil.
- Perforar agujeros piloto: Using a drill with the appropriate drill bit size for the wall anchors, carefully drill pilot holes at the marked positions. If drilling into a wall stud, anchors may not be necessary, but ensure screws are suitable for wood.
- Insertar anclajes de pared: If drilling into drywall or tile, gently tap the wall anchors into the pilot holes until they are flush with the wall surface.
- Coloque la placa de montaje: Align the mounting plate with the drilled holes and secure it to the wall using the provided screws. Ensure the plate is firmly attached and level.
- Mount Soap Dish Fixture: Carefully align the main soap dish fixture with the mounting plate. Secure the fixture to the plate using the set screw(s) typically located on the underside of the fixture. Tighten the set screw(s) with a screwdriver until the fixture is snug and does not wobble.
- Insert Glass Dish: Place the glass soap dish into the brass holder. Ensure it sits securely.
Image: The Phylrich KES25/004 Regent Wall Mounted Soap Dish, featuring a clear glass dish set within a decorative brass fixture. The brass base is circular with a textured edge, designed for wall mounting.
Uso
The Phylrich KES25/004 Regent Wall Mounted Soap Dish is designed to hold a bar of soap conveniently in your bathroom. Simply place your bar of soap onto the glass dish. The wall-mounted design helps keep your countertop clear and organized.
Mantenimiento
Regular cleaning will help maintain the finish and appearance of your soap dish.
- Cleaning the Brass Fixture: Utilice un paño suave y seco.amp cloth and a mild, non-abrasive cleaner specifically designed for brass or general bathroom fixtures. Avoid harsh chemicals, abrasive pads, or polishes that can damage the finish. Wipe dry immediately after cleaning to prevent water spots.
- Cleaning the Glass Dish: The glass dish can be removed for thorough cleaning. Wash with warm, soapy water and a soft sponge. Rinse thoroughly and dry with a lint-free cloth.
- Evitar: Do not use cleaners containing ammonia, bleach, or abrasive agents on any part of the soap dish.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| Soap dish feels loose on the wall. | Mounting screws or set screw are not tight. | Gently tighten the mounting screws behind the fixture or the set screw(s) on the underside of the fixture. Do not overtighten. |
| Glass dish is wobbly. | Dish not seated correctly or debris in holder. | Remove the glass dish, inspect for debris, clean, and re-seat it firmly into the brass holder. |
| El acabado parece opaco o manchado. | Hard water spots or improper cleaning agents. | Limpiar con un paño suave.amp cloth and a mild, non-abrasive cleaner. Avoid harsh chemicals. Dry immediately after cleaning. |
Presupuesto
- Modelo: KES25/004
- Marca: Phylrich
- Material: Latón, vidrio
- Tipo de montaje: Montaje en pared
- Cantidad de artículos del paquete: 1
- ASIN: B003I9RBNE
- Código postal: 883908627797
Información de garantía
Specific warranty details for the Phylrich KES25/004 Regent Wall Mounted Soap Dish are typically provided at the point of purchase or can be obtained directly from the manufacturer. Please refer to your purchase documentation or visit the official Phylrich webSitio para conocer la política de garantía más actualizada.
Atención al cliente
For technical assistance, missing parts, or warranty inquiries, please contact your retailer or the manufacturer, Phylrich, directly. Contact information can usually be found on their official websitio o en el embalaje de su producto.
