Introducción
This manual provides detailed instructions for the installation, operation, and maintenance of your Kohler K-7159 Vintage Pop-Up Tub Drain. This drain is designed for above-the-floor and free-standing bath installations, featuring a Vibrant French Gold finish. Please read this manual thoroughly before beginning installation or use to ensure proper function and longevity of your product.
Información importante de seguridad
- Cierre siempre el suministro principal de agua antes de comenzar cualquier trabajo de plomería.
- Utilice equipo de protección personal adecuado, como gafas de seguridad y guantes, durante la instalación.
- Si no está seguro acerca de alguna parte del proceso de instalación, consulte a un plomero calificado.
- Asegúrese de que todas las conexiones sean seguras y estancas para evitar fugas.
- Mantenga las piezas pequeñas fuera del alcance de los niños.
Componentes incluidos
Verifique que todos los componentes estén presentes antes de comenzar la instalación:
- T de latón
- Conjunto de drenaje
- Hardware de instalación
- Tubo

Figure 1: Kohler K-7159 Vintage Pop-Up Tub Drain. This image shows the complete drain assembly with its distinctive French Gold finish, ready for installation in a freestanding bathtub.
Configuración e instalación
This section outlines the general steps for installing the K-7159 pop-up tub drain. Specific details may vary based on your bathtub model and existing plumbing. Professional installation is recommended.
Herramientas necesarias (no incluidas):
- Llave ajustable
- Masilla de plomero o sellador de silicona
- Destornillador (Phillips/cabeza plana)
- Cinta métrica
- Pipe cutters (if adjusting pipe length)
Pasos de instalación:
- Prepare la bañera: Ensure the bathtub drain opening is clean and free of debris. For above-the-floor installations, confirm adequate clearance beneath the tub for drain connections.
- Instalar la zapata de drenaje: Apply plumber's putty or silicone sealant around the underside of the drain flange. Insert the drain flange into the tub's drain opening from the inside of the tub. From underneath, attach the drain shoe assembly, tightening the nut securely to create a watertight seal.
- Connect Overflow (if applicable): If your tub has an overflow, connect the overflow pipe to the overflow opening on the tub and to the brass tee assembly. Ensure all gaskets are properly seated.
- Ensamblar el mecanismo emergente: Connect the pop-up stopper rod to the drain assembly according to the included hardware instructions. Test the pop-up function to ensure smooth operation.
- Connect to House Plumbing: Connect the drain pipe from the tub drain assembly to your existing house plumbing (P-trap). Ensure all connections are tight and sealed.
- Prueba de fugas: Fill the bathtub with water and allow it to drain. Carefully inspect all connections for any signs of leakage. Tighten connections as necessary.
Operación
The Kohler K-7159 features a simple pop-up mechanism for controlling water drainage.
- Para cerrar el drenaje: Press down firmly on the drain stopper located in the tub's drain opening. It will click into place, sealing the drain and allowing the tub to fill.
- Para abrir el drenaje: Press down firmly on the drain stopper again. It will release and pop up, allowing water to drain from the tub.
Cuidado y mantenimiento
Proper care will help maintain the finish and function of your Kohler K-7159 tub drain.
- Limpieza del acabado: Clean the Vibrant French Gold finish with a soft, damp Paño. Evite limpiadores abrasivos, productos químicos fuertes o estropajos, ya que pueden dañar el acabado. Generalmente, basta con agua y jabón suave.
- Limpieza del desagüe: Periodically remove the pop-up stopper to clear any hair or debris that may accumulate. This can be done by twisting or pulling the stopper out, depending on its design. Clean the stopper and the drain opening, then reinsert the stopper.
- Prevención de obstrucciones: Use a drain protector or hair catcher to minimize debris entering the drain, especially if hair is a common issue.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| Drain is slow to empty. | Acumulación de cabello o residuos en el desagüe. | Remove the pop-up stopper and clean out any obstructions. Use a drain snake if necessary. |
| Drain does not seal properly. | Stopper not seated correctly or debris under the stopper. | Remove and clean the stopper. Ensure it is reinserted correctly and free of obstructions. Check for proper adjustment of the pop-up mechanism. |
| Fugas de agua en las conexiones. | Loose connections or improperly seated gaskets. | Tighten all connections. Disassemble and reassemble with new plumber's putty or sealant if necessary, ensuring gaskets are correctly positioned. |
Presupuesto
| Marca | Kohler |
| Nombre del modelo | K-7159 |
| Número de pieza | K-7159-AF |
| Material | Latón |
| Tipo de acabado | Brushed (Vibrant French Gold) |
| Tipo de montaje | Floor Mount (for above-the-floor and free-standing installations) |
| Característica especial | Desagüe emergente |
| Peso del artículo | 7.1 libras |
| Dimensiones del producto | 1 x 1 x 1 inches (Approximate, refer to technical drawings for precise measurements) |
| Código Postal | 087206817465 |
Garantía y soporte
For detailed warranty information and customer support, please refer to the official Kohler website or contact Kohler customer service directly. Warranty terms may vary by region and product type.
You can visit the official Kohler store for more information: Kohler Official Store