Aiphone DA-2DS

Aiphone 2-Call DA Series Door Station

Model: DA-2DS Instruction Manual

Introducción

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Aiphone 2-Call DA Series Door Station, model DA-2DS. Please read this manual thoroughly before attempting to install or operate the unit to ensure correct usage and to prevent damage.

Aiphone DA-2DS 2-Call Door Station

Imagen: Frente view of the Aiphone DA-2DS 2-Call Door Station. This silver unit features two call buttons for multi-tenant or multi-location communication.

Información de seguridad

Tenga en cuenta las siguientes precauciones de seguridad para evitar lesiones y daños al equipo:

Contenido del paquete

Verifique que todos los artículos estén presentes en el paquete:

Configuración

Montaje

Select a suitable mounting location, typically near the entrance, at a height that allows easy access for all users. Ensure the surface is flat and secure. Use the provided mounting screws and anchors to firmly attach the door station to the wall.

Alambrado

Connect the door station to the indoor master station using appropriate wiring. The DA-2DS requires a 2-wire connection for each call button to the corresponding indoor station. Refer to the wiring diagram provided with your indoor master station for specific connection points. Ensure all connections are secure and insulated.

Encendido inicial

After all wiring is complete and verified, apply power to the system. Test each call button to ensure proper communication with the indoor stations.

Instrucciones de funcionamiento

Realizar una llamada

To initiate a call from the door station, press the desired call button. This will activate the corresponding indoor master station, which will then ring to alert the occupant.

Respondiendo una llamada

When a call is initiated from the door station, the indoor master station will ring. The occupant can answer the call by pressing the talk button on the indoor station. Two-way communication will then be established.

Mantenimiento

Limpieza

Clean the exterior of the door station periodically with a soft, damp cloth. Do not use abrasive cleaners, solvents, or strong chemicals, as these can damage the finish and internal components.

Controles regulares

Periodically check the mounting screws for tightness and ensure all wiring connections remain secure. Test the call buttons and communication functionality regularly to ensure proper operation.

Solución de problemas

ProblemaPosible causaSolución
No sound from door stationLoose wiring connection; faulty speaker/microphoneCheck wiring connections at both door and master stations. If problem persists, contact support.
Call button does not activate indoor stationIncorrect wiring; faulty buttonVerify wiring connections for the specific call button. Test button functionality.
Interference or poor audio qualityImproper wiring; electrical interferenceEnsure wiring is correctly installed and shielded if necessary. Check for nearby sources of electrical interference.

Presupuesto

Información de garantía

Aiphone products are designed for reliability and performance. This product is covered by a limited warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official Aiphone webSitio. Conserve su comprobante de compra para reclamaciones de garantía.

Apoyo

For technical assistance, troubleshooting, or service inquiries, please contact Aiphone customer support. You can find contact information, including phone numbers and online resources, on the official Aiphone website. When contacting support, please have your model number (DA-2DS) and a description of the issue ready.

Documentos relacionados - DA-2DS

Preview Adaptador de dos puertas Aiphone JOW-2D para el sistema de videoportero de la serie JO - Guía de instalación
Instrucciones y especificaciones detalladas del adaptador Aiphone JOW-2D, que permite conectar dos estaciones de puerta al sistema de videoportero de la Serie JO. Aprenda sobre el cableado, la alimentación y las características operativas de las instalaciones de intercomunicación.
Preview Sistema de intercomunicación con timbre Aiphone IC-1AD(U): Guía de instalación y funcionamiento
Guía completa para el sistema de intercomunicación con timbre para 1 puerta y 1 habitación Aiphone IC-1AD(U), que cubre características, especificaciones, instalación, cableado, funcionamiento y garantía.
Preview Manual de instalación del videoportero Aiphone IX-DVM
Manual de instalación detallado del videoportero Aiphone IX-DVM, que abarca la instalación, el cableado, las precauciones y la configuración del sistema. Incluye nombres de piezas, accesorios y guías de conexión.
Preview Guía de funcionamiento de la estación de inquilinos Aiphone GT-1C
Guía completa de funcionamiento de la estación de inquilinos Aiphone GT-1C. Conozca su fuente de alimentación, pantalla LCD, altavoz, micrófono y las funciones de botones como Apertura de puerta, Opción, Protección, Hablar y Apagado, además de los controles laterales de brillo, volumen y zoom.
Preview Instrucciones del sistema de seguridad con videoportero de dos cables Aiphone MY-1AD
Instrucciones y especificaciones completas para el sistema de seguridad con entrada de video de 2 cables Aiphone MY-1AD, que cubren la instalación, el funcionamiento y los componentes del sistema.
Preview Guía de instalación de Aiphone TW-TA-SP y TW-TE-SP: Configuración de la torre de llamadas de emergencia
Guía completa de instalación para las torres de llamada de emergencia Aiphone TW-TA-SP y TW-TE-SP. Abarca la configuración, el cableado y la herramienta de soporte IXG para estaciones de emergencia.