1. Introducción
El AMP Research PowerStep is an automatic, electric-powered running board designed to provide convenient and safe access to your truck. It extends instantly when the vehicle door is opened and retracts out of sight when the doors close, offering improved ground clearance, aerodynamics, and a clean appearance. This manual provides essential information for the setup, operation, maintenance, and troubleshooting of your PowerStep system.
Características principales:
- Implementación automática: Steps extend and retract automatically with door operation.
- Construcción robusta: Features die-cast aluminum alloy components and precision stainless steel pivot pins for stability.
- Alta capacidad de carga: 6-inch wide, cab-length step boards capable of supporting a 600 lb. load.
- Seguridad mejorada: Textured, slip-resistant stepping surface, onboard LED lighting, and 'Anti-Pinch' technology.
- Vehicle-Specific Fitment: Designed for 2007 - 2021 Toyota Tundra Crew Cab/Double Cab/Extended Crew Cab/CrewMax models.
2. Configuración e instalación
El AMP Research PowerStep is engineered for straightforward installation. For detailed, step-by-step instructions specific to your vehicle model, please refer to the official Manual de instalación (PDF). This section provides a general overview.
Consideraciones previas a la instalación:
- Asegúrese de tener todos los componentes enumerados en la lista de embalaje.
- Basic tools are required. Some installations may require drilling small hole(s).
- Verify vehicle compatibility (2007 - 2021 Toyota Tundra Crew Cab/Double Cab/Extended Crew Cab/CrewMax).
Pasos generales de instalación:
- Review the complete installation manual before beginning.
- Mount the PowerStep linkage assemblies to the vehicle's frame.
- Attach the step boards to the linkage assemblies.
- Install the control module and connect the wiring harness to the vehicle's electrical system.
- Connect the LED step lights.
- Test the operation of the PowerSteps to ensure proper deployment and retraction.
Imagen: La AMP Research PowerStep running boards, ready for installation.
Image: A person demonstrating the ease of entry into a truck with the PowerStep deployed.
3. Operación
El AMP Research PowerStep system is designed for intuitive, automatic operation, requiring no manual intervention once installed correctly.
Despliegue y retracción automáticos:
- When a vehicle door is opened, the PowerStep will automatically deploy within approximately one second, providing a convenient step.
- When all vehicle doors are closed, the PowerStep will retract and stow itself discreetly under the vehicle, typically within three seconds.
- The integrated LED lights illuminate the step area upon deployment for enhanced visibility in low-light conditions.
- The 'Anti-Pinch' technology is designed to detect obstructions during retraction and will stop the step's movement to prevent injury or damage.
Imagen: Un primer plano view highlighting the textured, slip-resistant surface of the PowerStep, ensuring secure footing.
4. Mantenimiento
El mantenimiento regular garantiza la longevidad y el rendimiento óptimo de su AMP Research PowerStep.
Limpieza:
- Periodically clean the step surface and the linkage mechanisms to remove dirt, mud, salt, or other debris.
- Use a mild soap and water solution. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
- Enjuague bien con agua limpia.
Inspección:
- Inspect the pivot points and moving parts for any signs of wear or damage.
- Ensure all fasteners are secure. Do not overtighten.
- Check the wiring for any fraying or exposed sections.
- Lubricate the pivot points with a silicone-based lubricant as needed, especially in harsh weather conditions.
5. Solución de problemas
If you encounter issues with your PowerStep, refer to the table below for common problems and their potential solutions.
| Problema | Posible causa | Solución |
|---|---|---|
| Steps do not deploy or retract. | Power supply issue, loose wiring, motor malfunction, or obstruction. | Check vehicle's fuse box. Inspect all wiring connections for tightness and corrosion. Remove any obstructions. If problem persists, consult the full installation manual or professional assistance. |
| Los escalones son ruidosos durante el funcionamiento. | Lack of lubrication, dirt/debris in mechanism. | Clean the linkage mechanisms thoroughly. Apply a silicone-based lubricant to all pivot points. |
| Las luces LED no funcionan. | Loose connection, damaged wiring, or faulty LED. | Check the wiring connections to the LED lights. Inspect for any visible damage to the light strips. |
| Steps deploy unevenly or are crooked. | Improper installation, loose mounting hardware, or damaged linkage. | Re-check mounting hardware for proper torque. Ensure the linkage arms are not bent or damaged. Refer to the installation manual for correct alignment. |
Imagen: Una parte inferior view of the PowerStep, illustrating the low-profile LED lighting and robust construction.
6. Especificaciones
| Atributo | Detalle |
|---|---|
| Marca | AMP Investigación |
| Número de modelo | 75137-01A |
| Material | Aluminio |
| Color | Negro |
| Acabado exterior | Pintado |
| Dimensiones del artículo (largo x ancho x alto) | 8 x 81 x 13 pulgadas |
| Peso del artículo | 45 libras |
| Límite de peso | 600 libras |
| Código Postal | 815410010347 |
| Tipo de servicio del vehículo | Truck (Specifically 2007 - 2021 Toyota Tundra Crew Cab/Double Cab/Extended Crew Cab/CrewMax) |
7. Garantía y soporte
Información de garantía:
AMP Research stands behind its products with a hassle-free, comprehensive Garantía de 5 años/60,000 millasEsta garantía cubre defectos de materiales y mano de obra en condiciones normales de uso. Conserve su comprobante de compra para reclamaciones de garantía.
Atención al cliente:
For further assistance, technical support, or warranty claims, please contact AMP Research customer service. You may also find additional resources and FAQs on the official AMP Investigación websitio.
For the complete installation guide and other documentation, please refer to the Guía oficial del usuario en PDF.
