Producto terminadoview
The Klein Tools NCVT-2 is a dual-range non-contact voltage tester designed for automatically detecting both low voltage y vol estándartage in electrical systems. It features visual and audible indicators to alert users to the presence of AC voltage, enhancing safety during electrical work. Its durable construction and compact design make it a reliable tool for professionals and DIY enthusiasts.
Características principales:
- Automatic Dual-Range Detection: Automatically detects low voltage (12-48 VAC) and standard voltage (48-1000 VCA).
- Operación sin contacto: Detecta de forma segura el volumen de CAtage sin contacto directo con los conductores.
- Visual and Audible Indicators: A bright green LED indicates the tester is operational. Flashing red LED and distinct warning tones signal voltage detección.
- Worklight Functionality: High-intensity green LED also functions as a worklight for illuminating dark areas.
- Apagado automático: Conserves and extends battery life.
- Construcción duradera: Lightweight, durable polycarbonate plastic resin construction with 9.8-foot / 3 m drop protection.
- Clasificación de seguridad: CAT IV 1000V safety rating, conforms to CE requirements.
Información de seguridad
ADVERTENCIA: Read, understand, and follow all warnings, cautions, safety information, and instructions in this manual before operating or servicing this tester. Failure to follow instructions could result in death or serious injury.
- Nunca suponga que los cables neutros o de tierra están desenergizados. Los cables neutros en circuitos derivados con varios cables pueden estar energizados cuando se los desconecta y deben volver a probarse antes de manipularlos.
- Always test on a known live circuit before and after use to ensure the tester is functioning correctly.
- Do not use if the tester appears damaged or is not operating properly.
- Cumplir con todos los códigos de seguridad locales y nacionales.
Configuración
Instalación de la batería:
- Unscrew the cap at the rear of the tester.
- Insert two (2) 1.5V AAA Alkaline batteries, ensuring correct polarity (+/-).
- Securely screw the cap back onto the tester.
- Press the power button to confirm the green LED illuminates, indicating proper battery installation and functionality.
Figure 1: Klein Tools NCVT-2 Voltage Tester, showing the overall design and cap for battery access.
Instrucciones de funcionamiento
Encendido/apagado y selección de modo:
- Para encender: Press and hold the power button for approximately 1 second. The green LED will illuminate, indicating the tester is ready for use in dual-range mode (12-1000 VAC).
- To Switch to Standard Voltage Only Mode: While the tester is on, press the power button briefly. The blue LED will turn off, and the green LED will remain on, indicating standard voltage detection (48-1000 VAC).
- To Switch Back to Dual-Range Mode: Press the power button briefly again. The blue LED will illuminate along with the green LED.
- Para apagar: Press and hold the power button until the LEDs turn off. The tester also features an auto power-off function after a period of inactivity to conserve battery life.
Volumentagy Detección:
- Ensure the tester is powered on and the green LED is illuminated.
- Place the tip of the tester near the conductor, outlet slot, or insulated wire you wish to test.
- Si AC voltage is detected, the red LED will flash, and an audible tone will sound. The frequency of the beeps and flashes increases as the tester gets closer to the voltagy fuente.
- Para bajo volumentage (12-48 VAC) detection, ensure the tester is in dual-range mode (green and blue LEDs illuminated).
- Para volumen estándartage (48-1000 VAC) detection, either dual-range mode or standard voltage only mode can be used.
Figure 2: Using the NCVT-2 to test for voltage en una toma eléctrica.
Worklight Function:
- The high-intensity green LED at the tip of the tester can be used to illuminate the workspace, especially in dimly lit areas.
Mantenimiento
- Reemplazo de batería: Replace batteries when the green LED fails to illuminate or the tester does not respond as expected. Refer to the 'Battery Installation' section for instructions.
- Limpieza: Wipe the tester with a dry, lint-free cloth. Do not use abrasive cleaners or solvents.
- Almacenamiento: Guarde el probador en un lugar fresco y seco, alejado de la luz solar directa y de temperaturas extremas.
Solución de problemas
- El probador no se enciende: Verifique la instalación de las baterías y reemplácelas si es necesario.
- Lecturas inconsistentes: Ensure the tester tip is close enough to the conductor. Test on a known live circuit to verify functionality. Environmental factors or interference can sometimes affect readings.
Presupuesto
| Especificación | Valor |
|---|---|
| Marca | KLEIN TOOLS |
| Número de modelo | Prueba NCVT-2 |
| Fuente de poder | 2 pilas alcalinas AAA de 1.5 V (incluidas) |
| mín. Volumen operativotage | 12 Voltios AC |
| máx. Volumen operativotage | 1000 Voltios AC |
| Clasificación de seguridad | CATIV 1000V |
| Protección contra caídas | 9.8 pies / 3 m |
| Peso del artículo | 0.8 onzas |
| Material | Polycarbonate Plastic Resin |
| Características especiales | 50 - 500 Hz Low-Pitched Pulsing Beeping Sound; Blue LED Turns Off and Red LED Blinks (Approximately 2x Per Second) |
Garantía y soporte
The Klein Tools NCVT-2 VoltagEl probador electrónico viene con un 2 año de garantía a partir de la fecha de compra.
For technical support, troubleshooting assistance, or warranty claims, please visit the official Klein Tools websitio o comuníquese con su departamento de servicio al cliente.
Figure 3: Klein Tools NCVT-2 Voltage Tester, muestraasing its dual-range capabilities and safety features.
