1. Configuración
1.1 Instalación de la batería
The URC 2981 remote control requires 2 AAA batteries for operation. Ensure correct polarity when inserting the batteries.

Figura 1: Compartimento de batería con pilas AAA.
- Ubique la tapa del compartimiento de la batería en la parte posterior del control remoto.
- Deslice la tapa hacia abajo para abrir el compartimento.
- Inserte dos pilas AAA, haciendo coincidir los terminales positivo (+) y negativo (-) como se indica dentro del compartimento.
- Deslice la tapa de la batería nuevamente en su lugar hasta que haga clic de forma segura.
1.2 Initial Device Programming
The One For All URC 2981 is a universal remote control designed to operate up to 8 different audio/video devices. Programming can typically be done using direct code entry or an automatic search function. Refer to the included code list for your specific device brands.

Figure 2: Universal remote programming in action.
For detailed programming instructions, please consult the full manual provided with your remote or visit the Uno para todos websitio for online support and code lookup.
2. Instrucciones de funcionamiento
The URC 2981 remote control features a comprehensive set of buttons for controlling various functions of your programmed devices. Familiarize yourself with the button layout for optimal use.

Figura 3: Sobreview of URC 2981 buttons.
2.1 Funciones de los botones clave
- Botón de encendido: Enciende o apaga el dispositivo seleccionado.
- Device Select Buttons (TV, VCR, DVD, SAT, AMP, HI-FI, DVB-T, AUX): Press to select the device you wish to control. The remote will then send commands to that specific device.
- Panel de navegación (Arriba, Abajo, Izquierda, Derecha, OK): Se utiliza para la navegación y selección del menú.
- Subir/bajar volumen (+/-): Adjusts the volume of the currently selected audio device.
- Channel Up/Down (Triangle Up/Down): Changes channels on TV or set-top box.
- Botón de silencio: Silencia o reactiva el audio.
- Teclado numérico (0-9): Para entrada directa de canal o ingreso de códigos.
- Controles de reproducción (Reproducir, Pausar, Detener, Rebobinar, Avance rápido, Saltar): Controls media playback on DVD/Blu-ray players or VCRs.
- Botón de guía: Accede a la guía electrónica de programación (si el dispositivo lo admite).
- Botón de menú: Abre el menú principal del dispositivo.
- Botones de colores (rojo, verde, amarillo, azul): Often used for specific functions within menus or interactive services (e.g., Teletext, Smart TV features).
For advanced functions or specific device commands, refer to your device's original manual in conjunction with the URC 2981's programming guide.
3. Mantenimiento
3.1 Limpieza del control remoto
To maintain the remote's appearance and functionality, clean it regularly. Use a soft, dry cloth to wipe down the surface. For stubborn dirt, slightly dampLimpie el paño con agua o un limpiador suave no abrasivo. Evite usar productos químicos fuertes o materiales abrasivos, ya que pueden dañar el acabado o los componentes internos del control remoto.
3.2 Reemplazo de batería
When the remote's performance degrades (e.g., commands are not registered consistently, or the range decreases), it's likely time to replace the batteries. Follow the instructions in Section 1.1 Battery Installation to replace the two AAA batteries. Always replace both batteries at the same time with new ones.
4. Solución de problemas
- Remote not operating your device:
- Asegúrese de que el control remoto apunte directamente al receptor de infrarrojos del dispositivo.
- Verifique que esté seleccionado el botón del modo de dispositivo correcto (por ejemplo, TV, DVD).
- Compruebe que las pilas estén correctamente insertadas y no estén agotadas. Reemplácelas si es necesario.
- Re-program the remote for your device using a different code from the code list, or try the automatic search method.
- Algunos botones no funcionan:
- This can occur if the remote is not fully compatible with all functions of your specific device model.
- Try the learning function (if available on your model) to copy commands from your original remote.
- Ensure the device mode is correctly selected for the function you are trying to use.
- Remote LED flashes after pressing a button:
- A flashing LED often indicates a low battery level. Replace the batteries.
- It could also indicate an invalid command for the selected device mode.
If issues persist, visit the One For All support websitio o comuníquese con su servicio de atención al cliente para obtener más ayuda.
5. Especificaciones
| Característica | Detalle |
|---|---|
| Número de modelo | URC2981 |
| Dimensiones del producto | 7.17 x 1.99 x 0.94 pulgadas |
| Peso del artículo | 6.7 onzas |
| Pilas necesarias | 2 pilas AAA |
| Número máximo de dispositivos compatibles | 8 |
| Dispositivos compatibles | TV, VCR, DVD, SAT, AMP, HI-FI, DVB-T, AUX (as per device buttons) |
| Color | Schwarz (negro) |
| Fabricante | Uno para todos |
6. Garantía y soporte
For warranty information, product registration, or technical support, please visit the official One For All website. You can find comprehensive FAQs, troubleshooting guides, and contact information for their helpdesk.
Oficial Websitio: www.unoparatodos.com
For online support and manuals, refer to the resources available on the manufacturer's websitio.





