Producto terminadoview
The Sharp SPC800 is a classic quartz analog twin bell alarm clock designed for reliable timekeeping and a powerful alarm. Its traditional design features a clear dial and durable metal construction, making it a functional addition to any bedroom.
- Quartz analog twin bell alarm Clock
- Button for backlight
- Luminous glow in the dark hands
- Esfera luminosa
Imagen: Frente view of the Sharp SPC800 Quartz Analog Twin Bell Alarm Clock, showcasing its silver finish and classic twin bell design.
Image: A diagram highlighting the main features of the alarm clock, including its easy-to-read dial, loud twin bell alarm, touch-activated backlight, and requirement for one AA battery.
Configuración
1. Instalación de la batería
The Sharp SPC800 alarm clock requires one (1) AA battery (not included) for operation. Ensure the battery is inserted with the correct polarity (+/-) as indicated in the battery compartment.
- Localice el compartimento de la batería en la parte posterior del reloj.
- Abra la tapa del compartimiento de la batería.
- Insert one (1) AA battery, matching the positive (+) and negative (-) terminals with the markings inside the compartment.
- Cierre bien la tapa del compartimento de la batería.
2. Ajuste de hora inicial
After installing the battery, set the current time.
- Locate the "TIME SET" knob on the back of the clock.
- Rotate the "TIME SET" knob clockwise or counter-clockwise until the hour and minute hands display the correct current time.
Imagen: Trasera view of the alarm clock, illustrating the location of the time setting knob, alarm setting knob, and the alarm on/off switch.
Instrucciones de funcionamiento
1. Configuración de la hora de la alarma
Para configurar la hora de alarma deseada:
- Locate the "ALARM SET" knob on the back of the clock.
- Rotate the "ALARM SET" knob until the small red alarm hand on the clock face points to your desired alarm time.
- For precise setting, it is recommended to advance the main time hands past the desired alarm time to ensure the alarm hand is correctly positioned for AM/PM if applicable (though this is an analog clock, so it's a 12-hour cycle).
2. Activación/desactivación de la alarma
The alarm is activated and deactivated using the ON/OFF switch located on the back of the clock.
- To activate the alarm, slide the switch to the "ON" position.
- To deactivate the alarm, slide the switch to the "OFF" position.
- The twin bell alarm is designed to be loud and will continue ringing until manually turned off. This model does not feature a snooze function.
3. Uso de la luz de fondo
Para viewing the time in low light conditions:
- Press and hold the "LIGHT" button located on the back of the clock.
- The clock face will illuminate. Release the button to turn off the backlight.
- Note: The hour and minute hands, as well as the hour markers, have a luminous glow-in-the-dark feature for passive visibility in the dark.
Mantenimiento
1. Reemplazo de la batería
To ensure optimal performance, it is recommended to replace the AA battery approximately every six months, or when the clock's accuracy diminishes or the backlight becomes dim.
- Siga los pasos de instalación de la batería descritos en la sección "Configuración".
- Deseche las baterías viejas de manera responsable de acuerdo con las regulaciones locales.
2. Limpieza
To clean the clock, gently wipe the surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these may damage the finish.
Solución de problemas
| Problema | Posible causa / solución |
|---|---|
| Clock not keeping accurate time or stops working. | Battery is low or depleted. Replace with a fresh AA battery. Ensure battery is inserted with correct polarity. |
| La alarma no suena. | Ensure the alarm ON/OFF switch on the back is in the "ON" position. Check battery level and replace if necessary. Verify the alarm hand is correctly set. |
| Backlight is dim or not working. | Battery is low. Replace with a fresh AA battery. |
| Audible ticking sound. | This is normal for a quartz analog movement and not an indication of a defect. The sound may be more noticeable in quiet environments. |
| Alarm rings slightly before or after the set time. | Due to the analog nature, minor variations in alarm activation time (a few minutes) can occur. This is typical for this type of mechanism. |
Presupuesto
Image: A visual representation of the alarm clock's dimensions, indicating a width of 4.6 inches, a height of 6.5 inches, and a depth of 2.2 inches.
- Marca: Afilado
- Número de modelo: SPC800
- Color: Plata
- Tipo de pantalla: Cosa análoga
- Fuente de energía: Funciona con pilas (se requiere 1 pila AA, no incluida)
- Dimensiones del producto: 2.45" de ancho x 6.9" de alto
- Peso del artículo: 0.83 libras (13.3 onzas)
- Material: Metal
- Tipo de movimiento: Cuarzo
- Forma de reloj: Campana gemela
- Tipo de montaje: Superficie de la mesa
- Fabricante: M. Z. Berger
- Código postal: 049353711119
Garantía y soporte
This Sharp SPC800 Quartz Analog Twin Bell Alarm Clock comes with a Garantía limitada. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included with your product or contact Sharp customer support.
For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please visit the official Sharp webSitio web o contacte con su departamento de atención al cliente. La información de contacto suele encontrarse en el empaque del producto o en la información del fabricante. websitio.
