Wayne CDU980E 3/4 HP Submersible Sump Pump

1. Introducción

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Wayne CDU980E 3/4 HP Submersible Sump Pump. Please read all instructions carefully before use and retain this manual for future reference.

Figure 1: Wayne CDU980E 3/4 HP Submersible Sump Pump

2. Información de seguridad

WARNING: Risk of electric shock. This pump is supplied with a grounding conductor and grounding-type attachment plug. To reduce the risk of electric shock, be certain that it is connected only to a properly grounded grounding-type receptacle.

• Desconecte siempre la alimentación de la bomba antes de manipularla o realizarle mantenimiento.
• No opere la bomba en una atmósfera explosiva.
• Ensure the electrical circuit is protected by a Ground Fault Circuit Interrupter (GFCI).
• Do not use this pump for pumping flammable or corrosive liquids.
• Keep hands clear of the pump intake and discharge openings when the pump is connected to power.
• This pump is designed for indoor use only in sump pits.

3. Contenido del paquete

Verifique que todos los componentes estén presentes y sin daños:

• Wayne CDU980E Sump Pump with Integrated Vertical Float Switch
• Manual de instrucciones

4. Características principales

• Motor de 3/4 HP: Capable of moving up to 5,490 gallons per hour (GPH).
• Construcción duradera: Features corrosion-resistant stainless steel motor housing and fasteners with a cast-iron volute for extended life.
• Interruptor de flotador vertical integrado: Designed for reliable automatic operation, tested to 1 million cycles.
• Top Suction Design: Helps prevent air lock and minimizes clogging from debris at the bottom of the sump pit.
• 1-1/2 inch NPT Discharge: Standard size for compatibility with common plumbing codes.
• Fácil instalación: Designed for quick setup, typically within 15 minutes, without the need to drill a weep hole.

Figure 2: Key Features of the Wayne CDU980E

5. Configuración e instalación

The Wayne CDU980E sump pump is designed for installation in 11-inch diameter or larger sump pits. Follow these steps for proper installation:

1. Prepare the Sump Pit: Ensure the sump pit is clean and free of debris. The pump should sit on a solid, level surface.
2. Conectar la tubería de descarga: Thread a 1-1/2 inch NPT discharge pipe into the pump's outlet. Use appropriate sealant for a watertight connection.
3. Instalar la válvula de retención: Install a check valve in the discharge line above the pump to prevent water from flowing back into the sump pit when the pump shuts off.
4. Posicionamiento de la bomba: Carefully lower the pump into the sump pit. Ensure the float switch can move freely without obstruction from the pit walls or other pipes.
5. Conexión eléctrica: Plug the pump into a properly grounded 120V, 60Hz electrical outlet protected by a GFCI. Ensure the power cord is routed to prevent damage.
6. Operación de prueba: Pour water into the sump pit to verify the float switch activates the pump and discharges water correctly.

Figure 3: Typical Sump Pump Installation

Instalación terminadaview Video

Vídeo 1: Un finalview of a similar Wayne sump pump, demonstrating its features and installation considerations. This video is provided by the manufacturer.

6. Instrucciones de funcionamiento

The Wayne CDU980E operates automatically via its integrated vertical float switch. When water in the sump pit rises and lifts the float to the 'ON' level (approximately 9 inches), the pump will activate and begin discharging water. Once the water level drops and the float returns to the 'OFF' level (approximately 4 inches), the pump will shut off. This automatic operation ensures your basement remains dry without constant manual intervention.

Figure 4: Wayne CDU980E Sump Pump Label

7. Mantenimiento

Regular maintenance helps ensure the longevity and reliable operation of your sump pump:

• Inspeccionar periódicamente: Periodically check the sump pit for debris that could obstruct the float switch or pump intake.
• Pantalla de admisión limpia: Ensure the pump's intake screen is clear of leaves, dirt, or other foreign objects.
• Test Float Switch: Manually lift the float switch to ensure the pump activates and deactivates correctly. This should be done monthly, especially during rainy seasons.
• Comprobar la línea de descarga: Verify that the discharge pipe is not clogged or frozen, especially in colder climates.
• Inspección del cable de alimentación: Check the power cord for any signs of damage or wear.

8. Solución de problemas

9. Especificaciones

Figure 5: Wayne CDU980E Product Dimensions

Figure 6: Performance Data for CDU980E

10. Garantía y soporte

The Wayne CDU980E Submersible Sump Pump comes with a 5 año de garantía del fabricante. For warranty claims, technical assistance, or replacement parts, please contact Wayne Water Systems customer support. Refer to the contact information provided in your product packaging or visit the official Wayne websitio.

Fabricante: Sistemas de agua de Wayne