1. Introducción
El ViewSonic PJD5133 is a high-performance SVGA 800x600 DLP projector designed for various environments, including classrooms and corporate offices. It features 2700 ANSI lumens and a 3000:1 contrast ratio, providing clear and bright images. Its slim and lightweight design enhances portability, making it suitable for both tabletop use and ceiling mounting. This manual provides essential information for setting up, operating, and maintaining your projector.
2. Características principales
- Tecnología de visualización: SVGA 800x600 DLP projector.
- Brillo: 2700 ANSI lumens for clear images.
- Relación de contraste: 3000:1 dynamic contrast ratio.
- Conectividad: HDMI, dual RGB in, composite, S-video, RGB out, audio in/out, RS232. Supports HD 720p and 1080i/p via HDMI.
- Ajuste de imagen: 1.1x manual optical zoom, vertical keystone correction (+/- 40°).
- Capacidad 3D: 120Hz/3D-ready with DLP® Link Technology (requires compatible glasses and optional 3D processor).
- Audio: Altavoz integrado de 1W.
- Eficiencia Energética: ECO mode for extended lamp life and reduced power consumption.
- Mantenimiento: Filter-less design for simplified upkeep.
- Portabilidad: Lightweight (5.7 lbs) and slim design (3.2 inches height).
3. ¿Qué hay en la caja?
Verifique que todos los artículos estén presentes en el paquete:
- ViewSonic PJD5133 Projector
- Cable de alimentación
- Cable VGA
- Remote control with batteries (2 AA batteries included)
- Guía de inicio rápido
- ViewCD de Sonic Wizard (con guía del usuario)
4. Producto terminadoview
Figura 1: Frente view del ViewSonic PJD5133 projector, showing the lens and ventilation grilles.
Figura 2: Angular view del ViewSonic PJD5133 projector, highlighting its compact design and input panel area.
5. Configuración
5.1 Colocación
Position the projector on a stable, flat surface for tabletop use, or securely mount it to the ceiling. Ensure adequate ventilation around the projector to prevent overheating. The projection distance will determine the image size; refer to the specifications for throw ratio details.
5.2 Conexión de dispositivos
- Conexión de energía: Connect the power cable to the projector's power inlet and then to an electrical outlet.
- Fuente del vídeo:
- HDMI: For digital video and audio, connect an HDMI cable from your source device (e.g., Blu-ray player, laptop) to the projector's HDMI port.
- VGA: For analog video, connect a VGA cable from your computer to one of the projector's RGB IN ports.
- S-Video/Compuesto: For standard definition video sources, use the S-Video or Composite video input ports.
- Fuente de audio: If using VGA or other analog video inputs, connect an audio cable from your source device to the projector's Audio In port. The projector has an integrated speaker.
- Control (opcional): For remote control via a computer, connect an RS232 cable to the projector's RS232 port.
6. Instrucciones de funcionamiento
6.1 Encendido / Apagado
- Encendido: Press the power button on the projector or the remote control. The power indicator light will turn blue.
- Apagado: Press the power button twice. The projector will enter a cooling cycle before shutting down completely.
6.2 Ajuste de imagen
- Enfocar: Gire el anillo de enfoque en la lente del proyector hasta que la imagen sea nítida y clara.
- Zoom: Adjust the zoom ring on the projector lens to increase or decrease the image size.
- Corrección trapezoidal: If the image appears trapezoidal, use the keystone correction function (usually via the remote or on-screen menu) to adjust the image geometry vertically.
6.3 Selección de la fuente de entrada
Press the 'Source' button on the remote control or projector control panel to cycle through available input sources (HDMI, VGA, S-Video, Composite). The projector also features auto source detection.
6.4 Modo ECO
Activate ECO mode via the projector's menu or remote control to reduce lamp brightness slightly, extend lamp life, and lower power consumption and fan noise. This mode is recommended for environments where maximum brightness is not essential.
6.5 Funcionalidad 3D
The PJD5133 is 3D-ready, supporting 120Hz refresh rates via DLP Link Technology. To experience 3D content, you will need DLP Link compatible active shutter glasses (e.g., ViewSonic PGD-250, sold separately) and potentially a 3D video processor (e.g., ViewSonic VP3D1, sold separately) to convert 3D HD formats.
7. Mantenimiento
7.1 Filter-less Design
The projector features a filter-less design, eliminating the need for regular air filter cleaning or replacement, which simplifies maintenance and reduces total cost of ownership.
7.2 litrosamp Vida
El proyector lamp has an estimated life of 5000 hours in normal mode and up to 6000 hours in ECO mode. To maximize lamp life, use ECO mode whenever possible and ensure proper ventilation.
7.3 Limpieza
- Exterior: Utilice un paño suave y seco para limpiar el proyector.asing. For stubborn marks, dampEnjuague ligeramente el paño con agua. Evite productos químicos agresivos.
- Lente: Gently wipe the lens with a lens cleaning cloth or a soft, lint-free cloth specifically designed for optical surfaces. Do not use abrasive materials.
8. Solución de problemas
Si tiene problemas con su proyector, consulte los siguientes problemas y soluciones comunes:
- No hay imagen en la pantalla:
- Ensure the projector is powered on and the power indicator is blue.
- Verify that the video cable (HDMI, VGA) is securely connected to both the projector and the source device.
- Select the correct input source using the 'Source' button on the remote or projector.
- Check the source device's display settings to ensure it is outputting video.
- La imagen está borrosa:
- Ajuste el anillo de enfoque en la lente del proyector.
- Asegúrese de que la superficie de proyección sea plana y que el proyector esté estable.
- La imagen es trapezoidal:
- Utilice la función de corrección trapezoidal para ajustar la geometría de la imagen.
- Ensure the projector is positioned perpendicular to the screen as much as possible.
- Sin sonido:
- If using HDMI, ensure the source device is sending audio via HDMI.
- If using VGA, ensure an audio cable is connected from the source to the projector's Audio In port.
- Verifique la configuración del volumen del proyector y asegúrese de que no esté silenciado.
- El control remoto no funciona:
- Asegúrese de que no haya obstrucciones entre el control remoto y el receptor de infrarrojos del proyector.
- Reemplace las pilas del control remoto.
9. Especificaciones
| Característica | Detalle |
|---|---|
| Número de modelo | PJD5133 |
| Resolución de pantalla | SVGA (800 x 600) |
| Brillo | Lúmenes 2700 ANSI |
| Relación de contraste | 3000:1 |
| Tecnología de conectividad | HDMI, VGA, S-Video, Composite, RS232 |
| Características especiales | 3D-Ready, Integrated Speaker |
| Dimensiones del producto | 11.2 x 9.2 x 3.2 pulgadas (284 x 234 x 82 mm) |
| Peso del artículo | 5.7 libras |
| Lamp Life (Normal/Eco) | 5000/6000 horas |
| Consumo de energía | 235W (typical) / <1W (stand-by) |
| Volumentage | 100-240VAC (Auto Switching), 50/60Hz |
10. Garantía y soporte
10.1 Información de garantía
El ViewSonic PJD5133 projector is backed by a comprehensive warranty:
- Piezas y mano de obra: Garantía limitada de 3 años.
- Lamp: Garantía limitada de 1 años.
- Express Exchange Service: Free 1st year Express Exchange® service (requires product registration).
For complete details regarding warranty terms and conditions, please refer to the documentation included with your product or visit the official ViewSónico websitio.
10.2 Soporte técnico
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact ViewSonic customer support. Contact information and support resources can typically be found on the official ViewSónico websitiowww.viewsonic.com).
