1. Producto terminadoview
The Intermatic WG733-14D motor is a replacement component designed for use in specific Intermatic timer series. This motor is crucial for maintaining accurate timekeeping and operational cycles within compatible timer units.
Compatible Intermatic Timer Series:
- Serie R8800
- Serie T1900
- Serie T1970
- Serie T8800
This motor operates at 208/240/277V and 60 Hz, featuring 14-inch leads for connection.
2. Información de seguridad
ADVERTENCIA: Electrical shock hazard. Always disconnect power at the circuit breaker or fuse box before installing or servicing this product. Failure to do so can result in serious injury or death.
- La instalación debe ser realizada por un electricista calificado o personal capacitado.
- Asegúrese de que todas las conexiones del cableado cumplan con los códigos eléctricos locales y nacionales.
- Verificar el voltage and frequency of your timer system match the motor's specifications (208/240/277V, 60 Hz).
- Do not operate the motor if it appears damaged.
3. Contenido del paquete
El paquete contiene el siguiente artículo:
- 1 x Intermatic WG733-14D Time Clock Motor
4. Especificaciones técnicas
| Especificación | Detalle |
|---|---|
| Número de modelo | WG733-14D |
| Marca | Intermático |
| Volumentage | 208/240/277 Volts AC |
| Frecuencia | 60 Hz |
| Longitud del cable | 14 pulgadas |
| Material | Lead (wiring insulation) |
| Peso del artículo | 1.58 onzas |
| Dimensiones del producto | 1.25 x 1.38 x 2.13 pulgadas |
5. Instrucciones de instalación
This section provides general guidance for replacing a time clock motor. Always refer to the specific instructions for your Intermatic timer series for detailed steps.
- Desconectar la energía: Before beginning any work, ensure that power to the timer unit is completely disconnected at the main circuit breaker or fuse box. Verify with a voltage probador.
- Temporizador de acceso: Open the timer enclosure to access the internal components. This may involve removing screws or latches.
- Identify Old Motor: Locate the existing time clock motor within the timer. Note its mounting position and how it connects to the timer's gears and electrical terminals.
- Desconecte el motor viejo: Carefully disconnect the electrical leads from the old motor. Note the polarity if applicable, though most AC motors are not polarity sensitive. Detach the motor from its mounting bracket or clips.
- Instalar motor nuevo: Position the new Intermatic WG733-14D motor in the same location as the old one. Secure it using the existing mounting hardware or clips.
- Conectar el cableado: Connect the 14-inch leads of the new motor to the appropriate terminals within the timer. Ensure connections are secure and free from loose strands.
- Verify Gear Engagement: Confirm that the motor's drive gear properly engages with the timer's gear train. The gears should mesh smoothly without binding.
- Close Timer: Carefully close the timer enclosure, ensuring all wires are clear of moving parts and pinch points.
- Restaurar energía: Restore power to the timer unit at the circuit breaker. Observe the timer's operation to ensure the motor is functioning correctly and the clock is advancing.
Si no está seguro de algún paso, consulte con un electricista calificado.
6. Operación
The Intermatic WG733-14D motor is an integral part of your compatible Intermatic time clock. Once correctly installed, it continuously rotates, driving the internal gears of the timer mechanism. This rotation ensures that the timer accurately tracks time and executes programmed switching operations (e.g., turning devices on or off) at the designated intervals.
The motor's function is automatic upon power supply, requiring no direct user interaction for its operation beyond the initial installation and ensuring continuous power to the timer unit.
7. Mantenimiento
The Intermatic WG733-14D time clock motor is designed for long-term, maintenance-free operation. However, periodic inspection of the timer unit can help ensure its longevity and proper function:
- Inspección visual: Annually, with power disconnected, visually inspect the motor and its connections for any signs of wear, corrosion, or damage.
- Limpieza: Keep the timer enclosure clean and free from dust, debris, or insect infestations, which can impede gear movement or cause overheating.
- Conexiones seguras: Asegúrese de que todas las conexiones eléctricas permanezcan firmes y seguras.
No lubrication or internal servicing of the motor is required.
8. Solución de problemas
If your Intermatic timer is not functioning correctly after motor replacement, consider the following troubleshooting steps:
| Problema | Posible causa | Solución |
|---|---|---|
| Timer clock does not advance. | No hay energía en el temporizador. Motor not properly connected. Los engranajes están atascados o desalineados. | Verifique el disyuntor y la fuente de alimentación. Verify motor wiring connections are secure (with power off). With power off, gently check gear engagement; ensure no obstructions. |
| El temporizador hace un ruido inusual. | Gears are binding or damaged. Defecto motor. | Disconnect power and inspect gears for damage or obstructions. If noise persists, the motor may be faulty. |
| Timer operates intermittently. | Conexiones eléctricas sueltas. Suministro de energía intermitente. | With power off, check all wiring connections for tightness. Verify stable power supply to the timer. |
If troubleshooting steps do not resolve the issue, it is recommended to contact Intermatic customer support or a qualified electrician.
9. Garantía y atención al cliente
Garantía: The warranty information for the Intermatic WG733-14D Time Clock Motor is provided by the manufacturer. Please refer to the official Intermatic documentation or websitio para obtener detalles específicos de la garantía.
Atención al cliente: For technical assistance, replacement parts, or further inquiries, please contact Intermatic customer support directly. Contact information can typically be found on the Intermatic official websitio o embalaje del producto.
Oficial de Intermatic Websitio: www.intermatic.com
