Larson Electronics HL-85

Manual del usuario del foco portátil Larson Electronics HL-85

Model: HL-85-RED-12V-5

1. Introducción

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Larson Electronics HL-85-RED-12V-5 Handheld Spotlight. This device is a 100-watt halogen spotlight designed for use with 12-volt or 24-volt DC power sources, featuring a red hunting lens and adjustable spot/flood beam capabilities. Please read this manual thoroughly before using the product.

2. Información de seguridad

Observe siempre las siguientes precauciones de seguridad para evitar lesiones o daños al producto:

3. Contenido del paquete

Verifique que todos los artículos estén presentes en el paquete:

Larson Electronics HL-85 Handheld Spotlight with red lens and coiled power cord

Imagen 3.1: Másview of the Larson Electronics HL-85 Handheld Spotlight with its coiled power cord and cigarette plug.

4. Características del producto

The Larson Electronics HL-85 Handheld Spotlight offers the following features:

Lado view of the HL-85 spotlight showing the handle and product label

Imagen 4.1: Lateral view of the spotlight, highlighting the ergonomic handle and product identification label.

Frente view of the HL-85 spotlight with the red hunting lens

Imagen 4.2: Frente view of the spotlight, showcasing the red hunting lens.

5. Configuración

Follow these steps to set up your handheld spotlight:

  1. Deshacer: Retire con cuidado todos los componentes del embalaje. Inspeccione si presentan daños.
  2. Conexión de energía: Locate the 16-foot coil cord with the cigarette plug. Insert the cigarette plug firmly into a compatible 12-volt or 24-volt DC power outlet in your vehicle or power supply. Ensure the connection is secure.
  3. Lens Check: Confirm that the red hunting lens is securely in place. The spotlight is designed to operate with either a 5-inch or 7-inch lens, which can be interchanged if you have optional sizes.
Trasero view of the HL-85 spotlight showing the power cable connection point

Imagen 5.1: Trasera view of the spotlight, illustrating the power cable connection point at the base of the handle.

Close-up of the coiled power cord with cigarette lighter plug

Imagen 5.2: Detallada view of the 16-foot coiled power cord and its cigarette lighter plug for DC power connection.

6. Instrucciones de funcionamiento

To operate your Larson Electronics HL-85 Handheld Spotlight:

  1. Encendido/apagado: Once connected to a suitable DC power source, press the power switch located on the handle to turn the spotlight on or off.
  2. Adjusting Beam (Spot/Flood): The spotlight features an adjustable lens. To change the beam pattern, gently rotate the front housing or lens assembly. Rotate in one direction for a tighter spot beam and in the opposite direction for a wider flood beam.
  3. Using the Red Hunting Lens: The red lens is designed to minimize disturbance to wildlife and preserve human night vision. It is particularly useful in low-light conditions where maintaining natural night adaptation is crucial.

7. Mantenimiento

Regular maintenance ensures optimal performance and longevity of your spotlight:

8. Solución de problemas

If you encounter issues with your spotlight, refer to the following table:

ProblemaPosible causaSolución
El foco no se enciende.No power to the cigarette plug.
Conexión suelta.
Bombilla fundida.
Check vehicle's power outlet (e.g., fuse).
Ensure cigarette plug is fully inserted.
Reemplace la bombilla halógena.
La luz es tenue o parpadea.Potencia insuficiente de la fuente.
Aging or faulty bulb.
Conexión pobre.
Verificar el volumen de la fuente de alimentacióntage y capacidad actual.
Reemplace la bombilla halógena.
Verifique y asegure todas las conexiones.
Cannot adjust beam from spot to flood.Obstrucción del mecanismo.
Improper rotation.
Inspect for debris or damage around the lens assembly.
Ensure you are rotating the correct part of the housing.

9. Especificaciones

CaracterísticaEspecificación
Número de modeloHL-85-RED-12V-5 (Part Number) / 1111OP86G3G (Item Model Number)
Tipo de fuente de luzHalógeno
Quétage100 vatios
Brillo1800 lúmenes
Distancia del hazUp to 900 feet (spot mode)
Fuente de poder12V / 24V DC (Plug-in Electric)
MaterialNylon, Polycarbonate
Característica especialDurable, Adjustable Spot/Flood Beam
Nivel de resistencia al aguaNo resistente al agua
Peso del artículo2 libras
Dimensiones del producto9 x 9 x 9 pulgadas

10. Garantía y soporte

The Larson Electronics HL-85 Handheld Spotlight is backed by a 3 año de garantíaEsta garantía cubre defectos de materiales y mano de obra en condiciones normales de uso.

For warranty claims, technical support, or inquiries regarding replacement parts, please contact Larson Electronics customer service. Refer to the product packaging or the official Larson Electronics webSitio para obtener información de contacto actualizada.

Documentos relacionados - HL-85

Preview Tira de luces LED GAU-12-IPS-LED-UVA: Instalación y características
Guía detallada de instalación y mantenimiento para la tira LED Larson Electronics GAU-12-IPS-LED-UVA, diseñada para entornos industriales. Funciona con 12-24 V CC y ofrece una alta durabilidad.
Preview Larson Electronics NGR-AC-34.5KV-1200A-AN-CU-M1 Air Core Neutral Grounding Reactor Specifications and Test Data
Detailed specifications, parameters, and test results for the Larson Electronics NGR-AC-34.5KV-1200A-AN-CU-M1 Air Core Neutral Grounding Reactor, including electrical ratings, physical dimensions, and performance curves.
Preview Cámara bala motorizada EXPCMR-ALG-OZ-IC-1080P-1227 HD-TVI Guía de instalación rápida y usuario
Este documento proporciona una guía rápida de instalación y uso para la cámara bala infrarroja motorizada HD-TVI EXPCMR-ALG-OZ-IC-1080P-1227 de Larson Electronics. Abarca características, montaje, instrucciones de cableado, ajustes de la cámara mediante el menú OSD, limpieza, solución de problemas y especificaciones detalladas.
Preview Larson Electronics LEDB-4-IR Infrared LED Beacon - Installation and Maintenance Manual
Instruction manual for the Larson Electronics LEDB-4-IR Permanent Mount Infrared LED Beacon. Covers installation, wiring, safety warnings, maintenance, and use for 12-32VDC systems.
Preview Diagrama de cableado del MT-DOE16-1P-208V-25KVA-480V-N3R de Larson Electronics
Diagrama de cableado detallado y guía de conexión para el transformador Larson Electronics MT-DOE16-1P-208V-25KVA-480V-N3R, incluyendo voltaje primario y secundariotagy conexiones.
Preview Interruptor de transferencia manual Larson Electronics PDU-MTS-3P-30A-480V - Producto fuera de servicioview
Información detallada sobre el interruptor de transferencia manual Larson Electronics PDU-MTS-3P-30A-480V, un modelo de 30-ampInterruptor de desconexión de 3 polos, sin fusible, diseñado para aplicaciones industriales con clasificación de 600 V CA/CC y carcasa NEMA 3R.