Introducción
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your Coaster Fine Furniture Louis Philippe Full Size Sleigh Bed Frame, Model 202411F. Please read these instructions carefully before beginning assembly and retain this manual for future reference.
Información de seguridad
- Always assemble the bed frame on a soft, clean surface to prevent damage to the product or your flooring.
- Asegúrese de que todas las piezas estén presentes y sin daños antes del montaje. No continúe con el montaje si alguna pieza falta o está rota.
- Tighten all fasteners securely, but do not overtighten, as this may strip threads or crack wood.
- Revise periódicamente todas las conexiones para asegurarse de que permanezcan firmes.
- Mantenga las piezas pequeñas fuera del alcance de los niños durante el montaje.
- No se pare ni salte sobre el marco de la cama.
- Utilice el marco de la cama únicamente para el propósito previsto.
Contenido del paquete
Verifique que todos los siguientes componentes estén incluidos en su paquete:
- One (1) Headboard
- One (1) Footboard
- Two (2) Side Rails
- Set of Slats with support legs
- Paquete de hardware (pernos, arandelas, tuercas, llave Allen)
Instrucciones de montaje
Follow these steps to assemble your bed frame. It is recommended to have two people for assembly.
- Desembalaje e identificación de las piezas: Carefully remove all components from the packaging. Lay them out on a clean, soft surface. Refer to the parts list to ensure all pieces are present.
- Fije los rieles laterales a la cabecera: Align the pre-drilled holes on one end of a side rail with the corresponding holes on the headboard. Insert the appropriate bolts and washers, then secure with nuts. Do not fully tighten yet. Repeat for the other side rail.
- Fije los rieles laterales al pie de cama: With the side rails attached to the headboard, align the free ends of the side rails with the footboard. Insert bolts and washers, then secure with nuts. Once all four connections are made, gently tighten all bolts using the provided Allen wrench.
- Instalar listones: Place the wooden slats across the width of the bed frame, resting them on the support ledges of the side rails. Ensure the support legs attached to the slats are positioned centrally and are touching the floor. Some slats may require screwing into the side rails for added stability; use the provided screws if applicable.
- Comprobación final: Ensure all bolts are securely tightened and the bed frame is stable.


Instrucciones de funcionamiento
Once assembled, your Coaster Fine Furniture Louis Philippe Full Size Sleigh Bed Frame is ready for use.
- Place your full-size mattress directly onto the installed slats.
- Asegúrese de que el colchón esté centrado y completamente apoyado sobre los listones.
- Regularly check the stability of the bed frame and tighten any loose connections as needed.

Mantenimiento y cuidado
To ensure the longevity and appearance of your bed frame, follow these care instructions:
- Limpieza: Clean the bed frame using a damp cloth. Avoid using strong chemicals, abrasive cleaners, or polishes that may damage the finish.
- Limpiar el polvo: Quite el polvo periódicamente con un paño suave y seco.
- Protección: Avoid direct sunlight and extreme temperature changes, which can cause wood to fade or crack.
- Comprobación de estabilidad: Periodically inspect all bolts and connections to ensure they are tight. Retighten as necessary.
Solución de problemas
Si tiene problemas con el marco de su cama, consulte los siguientes problemas y soluciones comunes:
- Ruidos chirriantes:
- Ensure all bolts connecting the headboard, footboard, and side rails are securely tightened.
- Check that the slats are properly seated and not rubbing against the side rails.
- Verify that the center support legs for the slats are firmly on the floor and evenly distributed.
- El marco de la cama se siente inestable:
- Re-check all assembly connections. Loose bolts are a common cause of instability.
- Asegúrese de que el marco de la cama esté sobre una superficie nivelada.
- Slats Popping Out or Breaking:
- Ensure the slats are correctly positioned within the side rail ledges.
- Verify that the slat support legs are intact and providing adequate central support. If legs are broken, contact customer support for replacement parts.
- Avoid excessive weight or impact on the bed, which can damage slats.
- Partes faltantes:
- If parts were missing upon initial unboxing, contact Coaster Fine Furniture customer support immediately with your model number and purchase details.
Presupuesto
| Marca | Muebles finos de Coaster |
| Número de modelo | 202411F |
| Tamaño | Lleno |
| Dimensiones del producto | 84.5" de largo x 56.25" de ancho x 47.25" de alto |
| Color | Capuchino |
| Tipo de acabado | Marrón |
| Peso del artículo | 73.6 libras |
| Requiere ensamblaje | Sí |
| Componentes incluidos | Footboard, Headboard, Side Rail, Slat |
Garantía y soporte
For warranty information or technical support regarding your Coaster Fine Furniture Louis Philippe Full Size Sleigh Bed Frame, please contact Coaster Fine Furniture customer service directly. Keep your purchase receipt and model number (202411F) readily available when contacting support.
Normalmente puede encontrar información de contacto en el sitio web del fabricante. websitio o a través de su minorista.





