Información importante de seguridad
Please read and understand all instructions before using the laminator. Keep this manual for future reference.
- No opere la laminadora si el cable de alimentación o el enchufe están dañados.
- Mantenga la laminadora alejada del agua u otros líquidos.
- Do not insert metal objects into the laminator.
- Asegúrese de que haya una ventilación adecuada alrededor de la máquina durante su funcionamiento.
- Desenchufe la laminadora cuando no esté en uso o antes de limpiarla.
- Este aparato no está diseñado para ser utilizado por personas (incluidos niños) con capacidades físicas, sensoriales o mentales reducidas, o con falta de experiencia y conocimientos, a menos que hayan recibido supervisión o instrucciones sobre el uso del aparato por parte de una persona responsable de su seguridad.
Producto terminadoview
The Amazon Basics 9-Inch Thermal Laminator is designed for home, office, or classroom use, providing high-quality lamination for various document sizes.
Figura 1: Frente view of the Amazon Basics 9-Inch Thermal Laminator Machine, showing the feed slot and branding.
Características principales:
- Laminates documents up to 9 inches wide.
- Two heat settings: 3 mil and 5 mil.
- Quick 4-minute warm-up time.
- Jam release lever for easy clearing.
- Diseño compacto.
Configuración
Desembalaje:
Carefully remove the laminator from its packaging. Retain the packaging for future storage or transport.
Figure 2: The laminator machine as it appears inside its frustration-free packaging.
Colocación:
Place the laminator on a flat, stable, and heat-resistant surface. Ensure there is adequate space around the machine for proper ventilation and for documents to exit the rear.
Conexión de energía:
Plug the power cord into a standard electrical outlet. The power switch is located on the side of the unit.
Figura 3: Primer plano view of the power switch, 3mil/5mil heat settings, and release lever on the side of the laminator.
Instrucciones de funcionamiento
Laminating a Document:
Encendido y calentamiento:
Turn the power switch to the "On" position. The "Ready" indicator light will illuminate once the machine has warmed up (approximately 4 minutes).
Seleccione la configuración de calor:
Choose the appropriate heat setting based on the laminating pouch thickness:
- 3 mil: For normal documents, photos, and card stock.
- 5 mil: For thinner papers.
Preparar documento:
Place the document inside a laminating pouch, ensuring it is centered and there is an even border around the edges. Use the included 3 mil thick, 8.9 by 11.4 inch laminating pouches or any compatible 3 mil or 5 mil pouch.
Figura 4: Example of laminating recipe cards, showing the document being fed into the laminator.
Insertar bolsa:
Carefully insert the sealed edge of the laminating pouch into the laminator's feed slot. The machine will automatically pull the pouch through.
Figure 5: A calendar page being laminated, demonstrating the machine's ability to handle various document types.
Recuperar documento laminado:
Once the pouch exits the rear of the machine, allow it to cool on a flat surface before handling to ensure proper sealing.
Figure 6: A collection of laminated items, including recipe cards, ID badges, and a calendar, showcasing the versatility of the laminator.
Mantenimiento
Limpieza:
Asegúrese de que la laminadora esté desenchufada y completamente fría antes de limpiarla. Limpie el exterior con un paño suave.amp Paño. No utilice limpiadores abrasivos ni disolventes.
Roller Cleaning (Optional):
Periodically, you may run a cleaning sheet (available separately) through the laminator to remove any adhesive residue from the rollers.
Almacenamiento:
Store the laminator in a cool, dry place when not in use. Ensure the power cord is neatly wrapped and not kinked.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| La laminadora no se enciende. | No enchufado; interruptor de encendido apagado; no hay energía en el tomacorriente. | Check power cord connection; ensure power switch is "On"; test outlet with another device. |
| Las bolsas se atascan en la máquina. | Pouch inserted incorrectly; pouch too thick; foreign object. | Presione el palanca de liberación to clear the jam. Ensure pouch is inserted sealed edge first and is within specified thickness (3 or 5 mil). |
| La laminación es turbia o burbujeante. | Incorrect heat setting; machine not fully warmed up; low-quality pouch. | Ensure correct heat setting (3 mil for normal, 5 mil for thinner); wait for "Ready" light; use high-quality laminating pouches. |
| La laminación no está sellada correctamente. | Incorrect heat setting; machine not fully warmed up; document too thick for pouch. | Verify heat setting; wait for "Ready" light; ensure document fits pouch with adequate border. |
Presupuesto
| Característica | Detalle |
|---|---|
| Número de modelo | PL9-US |
| Ancho de laminado | Hasta 9 pulgadas |
| Ajustes de calor | 3 millones, 5 millones |
| Tiempo de calentamiento | Aproximadamente 4 minutos |
| Número de rodillos | 2 |
| Peso | 1.2 kilogramos |
| Fuente de alimentación | Aire acondicionado estándar |
Garantía y soporte
For warranty information and customer support, please visit the official Amazon Basics websitio o comuníquese directamente con el servicio de atención al cliente de Amazon.
Soporte en línea: Tienda Amazon Basics
Note: Reading the full user manual is recommended prior to the first use of this product.
