Introducción
This manual provides essential instructions for the proper setup, operation, and maintenance of your AKG Pro Audio HT4500 Band 7 Reference Wireless Handheld Transmitter. The HT4500 is designed for professional audio applications, offering reliable wireless transmission and high-quality sound. Please read this manual thoroughly before using the device to ensure optimal performance and longevity.
Información de seguridad
Always observe the following safety precautions to prevent damage to the device or personal injury:
- Do not expose the transmitter to extreme temperatures, humidity, or direct sunlight.
- Evite dejar caer o someter el dispositivo a impactos fuertes.
- Utilice únicamente el tipo de batería especificado (alcalinas AA) y asegúrese de la polaridad correcta durante la instalación.
- No intente abrir ni modificar el dispositivo. Todas las reparaciones deben ser realizadas por personal cualificado.
- Mantenga el dispositivo alejado del agua u otros líquidos.
Contenido del paquete
Verifique que todos los artículos estén presentes en el paquete:
- 1 transmisor portátil HT4500
- 2 pilas AA
- 1 x Adaptador de soporte
Configuración
1. Instalación de la batería
- Unscrew the lower part of the transmitter body to access the battery compartment.
- Inserte dos (2) baterías alcalinas AA, asegurándose de la polaridad correcta (+/-) como se indica dentro del compartimiento.
- Securely screw the lower part of the transmitter body back into place.
- The HT4500 provides approximately 15 hours of operation with fresh AA alkaline batteries.
2. Microphone Head Attachment
The HT4500 supports interchangeable microphone heads. To attach a microphone head:
- Align the microphone head with the top of the transmitter body.
- Gently screw the microphone head onto the transmitter until it is firmly seated. Do not overtighten.
3. Encendido / apagado
Locate the power button on the transmitter. Press and hold the power button for a few seconds to turn the unit on or off. The display will illuminate upon power-on.
4. Synchronization with Receiver
For wireless operation, the HT4500 must be synchronized with a compatible AKG wireless receiver. Refer to your receiver's manual for detailed synchronization instructions. Generally, this involves:
- Setting the receiver to scan for available frequencies.
- Initiating the synchronization process on the transmitter (e.g., via infrared or manual frequency setting).
- Confirming successful pairing on both the transmitter and receiver displays.
Instrucciones de funcionamiento
Operación básica
- Función de silencio: The transmitter features a mute switch. Activate it to temporarily silence the microphone output without powering down the unit.
- Información de la pantalla: The integrated display shows critical information such as the selected frequency, channel, and remaining battery life in hours. This real-time display helps in managing operational time effectively.
Potencia de transmisión
The HT4500 offers up to 50mW transmission power, ensuring robust radio signal strength for long-distance applications and reliable performance in challenging RF environments. Adjusting transmission power may be possible via the transmitter's menu or in conjunction with the receiver, depending on local regulations and operational needs.
Tecnología de antena
The unique dipole-antenna design of the HT4500 ensures reliable transmission even when one pole of the antenna is partially or completely covered by the user's hand, minimizing signal dropouts during performance.
Mantenimiento
Limpieza
- Wipe the exterior of the transmitter with a soft, dry cloth.
- Para la suciedad incrustada, un paño ligeramente húmedo.amp Se puede utilizar un paño y secarlo inmediatamente.
- No utilice limpiadores abrasivos, solventes o productos químicos agresivos, ya que pueden dañar el acabado y los componentes internos.
- Regularly inspect the microphone grille for debris and gently clean if necessary.
Cuidado y reemplazo de la batería
- Replace batteries promptly when the display indicates low power to avoid interruption during use.
- Remove batteries if the transmitter will not be used for an extended period to prevent leakage and damage.
- Deseche las baterías usadas de acuerdo con las normas locales.
Almacenamiento
Store the HT4500 in a cool, dry place, away from direct sunlight and extreme temperatures. Use the original packaging or a protective case to prevent physical damage.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| Sin poder | Baterías muertas o instaladas incorrectamente. | Reemplace las baterías con baterías alcalinas AA nuevas, asegurándose de la polaridad correcta. |
| Sin salida de audio | Transmitter muted; incorrect frequency/channel; receiver not powered or connected; microphone head not properly attached. | Check mute switch; ensure transmitter and receiver are on the same frequency/channel; verify receiver connections; re-attach microphone head securely. |
| Señal intermitente o cortes | Interference; excessive distance from receiver; low battery; antenna obstruction. | Change frequency/channel; reduce distance to receiver; replace batteries; ensure clear line of sight to receiver antenna. |
| Mala calidad de audio (ruido, distorsión) | Interference; gain settings incorrect; damaged microphone head. | Change frequency/channel; adjust gain settings on transmitter and receiver; try a different microphone head if available. |
Presupuesto
| Característica | Detalle |
|---|---|
| Marca | AKG |
| Nombre del modelo | HT4500 Band7 50mW Reference Wireless Handheld Transmitter |
| Número de modelo del artículo | 3201H00280 |
| Factor de forma del micrófono | Solo micrófono |
| Fuente de poder | Funciona con pilas (2 pilas alcalinas AA) |
| Duración de la batería | Hasta 15 horas (con pilas alcalinas AA) |
| Número de canales | 50 |
| Potencia de transmisión | Hasta 50 mW |
| Tecnología de conectividad | Inalámbrico |
| Tipo de conector | Inalámbrico |
| Característica especial | Inalámbrico |
| Dispositivos compatibles | Receptor digital |
| Color | Negro |
| Peso del artículo | 125 gramos (4.4 onzas) |
| Dimensiones del paquete | 14 x 9.4 x 4 pulgadas |
| Código Postal | 885038021636 |
| Fecha de primera disponibilidad | 4 de abril de 2013 |
Información de garantía
AKG products are manufactured to high-quality standards and are covered by a limited warranty against defects in materials and workmanship. The specific terms and duration of your warranty may vary by region and product. Please retain your proof of purchase for warranty claims. For detailed warranty information, refer to the official AKG websitio o póngase en contacto con el servicio de atención al cliente.
Apoyo
Should you encounter any issues not covered in this manual or require further assistance, please contact AKG customer support.
- Soporte en línea: Visit the official AKG webSitio para preguntas frecuentes, registro de productos y recursos de soporte.
- Información del contacto: Refer to the AKG website for regional contact details, including phone numbers and email addresses.
