Introducción
This manual provides detailed instructions for the operation and maintenance of your Casio Pro Trek PRG-550-1A1 Tough Solar watch. Please read this manual carefully to ensure proper use and to fully utilize its advanced features, including digital compass, altimeter, barometer, and thermometer functions.
1. Configuración inicial
1.1 Carga del reloj (Tough Solar)
Your watch is equipped with a solar charging system. Before initial use, expose the watch face to bright light for several hours to ensure it is sufficiently charged. Avoid covering the watch face during charging. A low battery indicator may appear if the charge is insufficient.
Imagen 1: Frente view of the Casio Pro Trek PRG-550-1A1 watch, showing the solar panel on the dial.
1.2 Configuración de la ciudad y la hora de origen
- En el modo de indicación de la hora, mantenga presionada la tecla AJUSTAR Botón hasta que el código de la ciudad comience a parpadear.
- Utilice el MODO y LUZ buttons to select your desired Home City code.
- Prensa AJUSTAR para confirmar la ciudad.
- Utilice el MODO button to cycle through other settings like DST (Daylight Saving Time), 12/24-hour format, seconds, hour, minute, year, month, and day. Adjust each setting using the LUZ y MODO botones.
- Prensa AJUSTAR para salir del modo de configuración.
2. Modos de funcionamiento
El reloj cuenta con múltiples modos accesibles a través del MODO button and dedicated sensor buttons.
2.1 Modo de indicación de la hora
This is the default mode, displaying the current time, day, and date. The analog hands show the current time, while the digital display can show various information depending on settings.
2.2 Digital Compass Mode (COMP Botón)
Presione el COMP button to enter Compass Mode. The watch will display the current bearing (north, south, east, west) and a graphic representation of the direction. For accurate readings, ensure the watch is held level and away from strong magnetic fields.
Imagen 2: Primer plano view highlighting the digital display and sensor buttons.
2.3 Barometer/Thermometer Mode (BARÓ Botón)
Presione el BARÓ button to display atmospheric pressure and temperature. Temperature readings are most accurate when the watch is removed from the wrist for at least 20-30 minutes to avoid body heat interference.
2.4 Altimeter Mode (ALTÍ Botón)
Presione el ALTÍ button to measure altitude. The altimeter uses a pressure sensor, so readings can be affected by changes in atmospheric pressure due to weather. For best accuracy, calibrate the altimeter frequently using a known altitude reference.
2.5 Other Modes (via MODO Botón)
- Hora mundial: Muestra la hora actual en varias ciudades importantes alrededor del mundo.
- Cronógrafo: Mide el tiempo transcurrido, los tiempos fraccionados y dos finales.
- Minutero: A countdown timer function.
- Alarma: Establece alarmas diarias.
3. Mantenimiento
3.1 Carga
To maintain optimal performance, ensure the watch is regularly exposed to light for charging. Prolonged storage in darkness can deplete the battery and affect functionality. Refer to the power indicator on the digital display to monitor charge level.
3.2 Resistencia al agua
The PRG-550-1A1 is water resistant to 10 ATM (100 meters). This means it is suitable for swimming and snorkeling. Do not operate buttons while the watch is submerged in water. Avoid exposing the watch to hot water or steam, as this can compromise the seals.
3.3 Limpieza
Limpie el reloj con un paño suave y seco. Para la suciedad difícil, utilice un paño suave.ampened with water and a mild neutral detergent, then wipe dry. Avoid using volatile agents like thinner or benzine, as they may damage the resin components.
Imagen 3: Trasera view of the watch, displaying the "WR10BAR" water resistance marking.
4. Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| Watch is not charging or display is blank. | Exposición a la luz insuficiente. | Expose the watch face to bright light for an extended period. Ensure the solar panel is not obstructed. |
| La hora es incorrecta | Incorrect Home City setting or manual time adjustment error. | Re-set your Home City and manually adjust the time as described in Section 1.2. |
| Sensor readings (compass, altimeter, barometer) are inaccurate. | Interference from magnetic fields, rapid weather changes, or need for calibration. | Move away from electronic devices or metal objects. Calibrate the sensor according to the specific mode's instructions. For altimeter, calibrate with a known altitude. |
| Los botones no responden. | Watch may be in a locked state or battery is extremely low. | Ensure the watch is adequately charged. If submerged, do not press buttons. If problem persists, perform a full reset (refer to Casio support for specific reset procedures). |
5. Especificaciones
- Modelo: Casio Pro Trek PRG-550-1A1
- Fuente de energía: Tough Solar (alimentado por energía solar)
- Resistencia al agua: 10 ATM (100 metros)
- Sensores:
- Digital Compass (Azimuth measurement)
- Barometer (Atmospheric pressure measurement)
- Altimeter (Altitude measurement)
- Thermometer (Temperature measurement)
- Cronometraje: Analog and Digital display
- Funciones adicionales: World Time, Stopwatch, Countdown Timer, 5 Daily Alarms, Hourly Time Signal, Battery Level Indicator, Full Auto LED Light with Afterglow.
6. Garantía y soporte
For warranty information, please refer to the warranty card included with your purchase. In case of issues not covered by this manual, or for service and repair, please contact your authorized Casio dealer or visit the official Casio support webSitio. Conserve su comprobante de compra para reclamaciones de garantía.
Casio oficial Websitio: www.casio.com
