Kit de entrada de aire higroajustable acústico Aldes EHL 6-45L de 39 dB, manual, blanco (modelo 11014085)

1. Introducción

This manual provides comprehensive instructions for the Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit, model 11014085. This kit is designed to regulate airflow and reduce noise, ensuring optimal indoor air quality. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of the product.

Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit, white

Figure 1: Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit. This image shows the compact, rectangular design of the white air inlet unit.

2. Instrucciones de seguridad

Always follow basic safety precautions when installing or maintaining this product to reduce the risk of injury or damage.

Instalación profesional recomendada: Installation should ideally be performed by a qualified professional to ensure compliance with local building codes and proper functionality.
Leer instrucciones: Lea atentamente todas las instrucciones antes de comenzar la instalación.
Use equipo de protección: Utilice equipo de protección personal (EPP) adecuado, como guantes y protección para los ojos, durante la instalación.
Inspeccionar si hay daños: Before installation, inspect the product for any signs of damage. Do not install damaged components.
Ventilación adecuada: Ensure adequate ventilation during and after installation.
Mantener fuera del alcance de los niños: Este producto no es un juguete. Manténgalo fuera del alcance de los niños.
Desecho: Dispose of packaging materials responsibly and according to local regulations.

3. Contenido del paquete

Verifique que todos los componentes estén presentes y sin daños antes de continuar con la instalación.

1 x Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Unit
Installation accessories (e.g., mounting screws, seals - may vary by kit version)
Manual de usuario (este documento)

4. Configuración e instalación

This section outlines the general steps for installing the Aldes EHL air inlet. Specific installation details may vary based on the type of wall or window and local building codes. Consult a professional if unsure.

Elegir la ubicación: Select an appropriate location for the air inlet, typically on an exterior wall or window frame, ensuring it is not obstructed.
Preparar Apertura: Create an opening in the wall or window frame according to the dimensions specified in the product's technical data sheet (not provided in this manual, refer to manufacturer's websitio).
Install Outer Grille (if applicable): Secure the exterior grille to the outside of the opening.
Insert Air Inlet Unit: Carefully insert the Aldes EHL air inlet unit into the prepared opening from the interior side.
Unidad segura: Use the provided mounting screws to firmly secure the air inlet unit to the wall or window frame. Ensure it is level and sealed properly to prevent air leaks.
Aplicar sellos: Apply any necessary seals or gaskets to ensure airtightness and acoustic performance.
Funcionalidad de prueba: After installation, verify that the air inlet's hygro-adjustable mechanism moves freely and that airflow is established.

Note: For detailed diagrams and specific mounting instructions, please refer to the technical documentation provided by ALDES or consult their official websitio.

5. Instrucciones de funcionamiento

The Aldes EHL air inlet is a hygro-adjustable device, meaning its airflow capacity automatically adapts based on the humidity level in the room. This ensures optimal ventilation without manual intervention.

Ajuste automático: The internal sensor detects changes in ambient humidity. As humidity increases (e.g., during showering or cooking), the air inlet opens further to allow more fresh air in. As humidity decreases, it reduces the airflow.
Rendimiento acústico: The "39dB" rating indicates its acoustic attenuation capabilities, designed to reduce external noise transmission while maintaining ventilation.
Sin controles de usuario: This unit operates automatically and does not typically feature manual controls for airflow adjustment. Its design is intended for passive, demand-controlled ventilation.

6. Mantenimiento

Regular maintenance ensures the efficient and long-lasting operation of your Aldes EHL air inlet.

Frecuencia de limpieza: It is recommended to clean the air inlet at least once a year, or more frequently in dusty environments.
Procedimiento de limpieza:
1. Gently remove the front cover of the air inlet.
2. Use a soft brush or a vacuum cleaner with a brush attachment to remove dust and debris from the grille and internal components.
3. Limpie las superficies exteriores con adamp Paño. No utilice limpiadores abrasivos ni disolventes.
4. Ensure the humidity sensor (if visible) is free from dust and obstructions.
5. Vuelva a colocar la cubierta frontal de forma segura.
No obstruir: Ensure that the air inlet is never blocked by furniture, curtains, or other objects, as this will impair its performance.
Inspección: Inspeccione periódicamente la unidad para detectar cualquier signo de daño o desgaste.

7. Solución de problemas

If you encounter issues with your Aldes EHL air inlet, refer to the following common problems and solutions.

Problema	Posible causa	Solución
Flujo de aire insuficiente	Air inlet or outer grille is obstructed. Dust accumulation on internal components. Humidity sensor is blocked or faulty. Incorrect installation or sealing.	Verifique y elimine cualquier obstrucción. Clean the air inlet as described in the Maintenance section. Ensure the humidity sensor is clear. If still faulty, contact support. Verify proper installation and sealing.
Ruido excesivo	Loose components or improper sealing. External noise sources. Air inlet operating at maximum flow due to high humidity.	Check mounting screws and seals. Identify and address external noise sources. This is normal operation. Ensure the unit is clean.
Unit Not Adjusting	Humidity sensor is dirty or damaged. Mechanical obstruction of the adjustment mechanism.	Clean the humidity sensor. If still unresponsive, the sensor may be faulty. Inspect for any physical obstructions preventing movement.

If the problem persists after attempting these solutions, please contact Aldes customer support or a qualified technician.

8. Especificaciones

Key technical specifications for the Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit.

Número de modelo: 11014085 (also AJA50015)
Marca: ALDES
Tipo: Hygro-Adjustable Acoustic Air Inlet Kit
Rango de flujo de aire: 6 to 45 Liters per second (L/s)
Acoustic Attenuation: 39 dB
Color: Blanco
Forma: Rectangular
Fabricante: ALDES AERAULIQUE
Componentes incluidos: 1 Product (Air Inlet Unit)
Pilas necesarias: No
Categoría de producto: Performance Part (HVAC, Ducts)
ASIN: B00DCK2EMW

9. Garantía y soporte

For warranty information, technical support, or to inquire about spare parts, please contact ALDES directly.

Fabricante: ALDES AERAULIQUE
Websitio: www.aldes.com
Servicio al cliente: Refer to the ALDES webSitio para información de contacto regional.
Piezas de repuesto: Information regarding spare parts availability is not provided in the product specifications. Please contact ALDES customer service for details.

	Aldes EHL L 6-44 m³/h - 39 dB - White: Acoustic Hygrometric Air Inlet Kit Detailed information on the Aldes EHL L hygrometric air inlet kit, including its technical specifications, acoustic performance, dimensions, and installation guidelines. This kit provides adjustable airflow for residential buildings, ensuring optimal air quality and acoustic comfort.
	Aldes EHL S 6-44 m³/h - 37 dB - White: Hygro-Regulated Air Inlet Detailed information on the Aldes EHL S hygro-regulated air inlet, featuring acoustic performance up to 42 dB, adjustable airflow, and ceiling-directed air flow. Includes technical specifications, dimensions, and installation guidelines.
	Aldes EHL S 6-44 m³/h - 37 dB Aluminium Air Inlet - Technical Specifications Detailed technical specifications for the Aldes EHL S 6-44 m³/h - 37 dB Aluminium hygro-regulated air inlet, including features, dimensions, acoustic data, and installation guidelines.
	Aldes EHL L 6-44 m³/h - 39 dB Entrada de aire higroregulada color antracita Especificaciones técnicas y guía de instalación de la entrada de aire higroregulada Aldes EHL L, modelo 11014138, en color antracita. Ofrece atenuación acústica de hasta 42 dB y caudal de aire ajustable de 6 a 44 m³/h.
	Aldes EHL S 6-44 m³/h - 37 dB - Brown Hygro-regulated Air Inlet Technical specifications and installation guide for the Aldes EHL S hygro-regulated air inlet, featuring acoustic performance up to 42 dB, adjustable airflow based on humidity, and a discreet design. Includes dimensions, accessories, and acoustic data.
	Aldes EHL S 6-44 m³/h - 37 dB - Anthracite: Hygro-regulated Air Inlet Detailed information on the Aldes EHL S hygro-regulated air inlet, featuring acoustic performance up to 42 dB, adjustable airflow based on humidity, and a sleek design. Includes technical specifications, dimensions, and available accessories.

ALDES 11014085

Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit