Manual de instrucciones del sellador de caucho líquido Flex Seal Clear de 14 oz

Producto terminadoview

This manual provides instructions for the proper use and application of Flex Seal Clear 14 oz Liquid Rubber Sealant Coating, model FSCL20. Flex Seal is an all-purpose rubberized coating designed to seal, protect, and stop leaks quickly. It dries to a transparent, watertight, flexible, rubberized coating that remains pliable for years.

It is suitable for various surfaces including gutters, wood, RVs, campers, roofs, skylights, and windows.

Imagen: Frente view of the Flex Seal Clear 14 oz spray can, showing product branding and key features.

Información de seguridad

ADVERTENCIA: Este producto contiene sustancias químicas reconocidas por el estado de California como causantes de cáncer y defectos de nacimiento u otros daños reproductivos. Para más información visite www.P65Warnings.ca.gov.

PELIGRO: Extremely flammable. Harmful or fatal if swallowed. Vapor harmful. May cause eye, skin, and respiratory tract irritation. Contents under pressure. Read all cautions on the back panel of the can before use.

Use only in a well-ventilated area. Ensure fresh air entry during application and drying. Do not use near heat, sparks, pilot lights, or other sources of ignition. Do not smoke. When spraying indoors, eliminate ignition sources far from the point of use because vapors are heavier than air and may travel significant distances.

For detailed safety data, refer to the official Safety Information PDF: Información de seguridad (PDF).

Imagen: Parte posterior view of the Flex Seal Clear 14 oz spray can, displaying important safety warnings and usage instructions.

Preparation for Application

Proper surface preparation is crucial for optimal adhesion and performance.

1. Limpiar la superficie: Ensure the application surface is clean, dry, and free of grease, oil, dirt, and loose debris. For best results, use denatured alcohol to clean the surface, as it leaves no residue.
2. Rough the Surface (Optional but Recommended): For enhanced bonding, lightly sand the surface with 60-grit sandpaper. After sanding, clean the surface again to remove any dust.
3. Protect Surrounding Areas: Use painter's tape or other masking materials to protect areas not intended for coating from overspray.
4. Shake Can Thoroughly: Shake the can vigorously for at least one minute before use and occasionally during application.

Image: A hand wiping down a surface, illustrating the cleaning step before applying the sealant.

Instrucciones de aplicación

Follow these steps for effective application of Flex Seal Clear:

1. Hold Can Correctly: Hold the can 8 to 12 inches from the surface.
2. Apply Even Coats: Spray using an even, sweeping motion. Apply multiple thin coats rather than one thick coat to prevent drips and ensure proper curing.
3. Dejar secar: Allow each coat to dry for several minutes until tacky before applying the next.
4. Tiempo de curado: For optimal results, allow 24 to 48 hours for the product to fully cure. Curing time may vary depending on temperature and humidity.
5. Capas: For larger cracks or holes, consider using a backing material like screen mesh before applying Flex Seal to provide structural support.

Image: A person applying Flex Seal spray to the exterior frame of a window, demonstrating precise application.

Image: Flex Seal being sprayed into a gutter, showing its use for sealing water channels.

Image: A person spraying Flex Seal onto the slats of a wooden Adirondack chair, demonstrating application on wood surfaces.

Image: Flex Seal being sprayed onto a crack in a concrete surface, showing its use for sealing minor surface imperfections.

Mantenimiento y durabilidad

Flex Seal is designed for long-lasting flexibility and durability. It resists sagging or dripping in summer heat and cracking or peeling in winter cold. The clear formula may yellow over time when exposed to direct sunlight. If desired, the cured coating can be painted any color.

Regular inspection of sealed areas is recommended. Reapply as needed to maintain the protective barrier, especially in areas subject to high wear or extreme conditions.

Solución de problemas comunes

• Bubbles during application: If bubbles appear, the product is likely being applied too thickly. Apply thinner, more even coats and allow sufficient drying time between layers.
• Mala adherencia: Ensure the surface is thoroughly cleaned and prepared as per the "Preparation for Application" section. Oily, dirty, or unprepared surfaces will prevent proper bonding.
• Leaks persist after application: This product is best suited for low-stress sealing situations. It may not hold up under high-pressure water or significant structural stress. For larger holes or areas under pressure, consider using a backing material or multiple, thicker layers.
• Clear coating yellowing: The clear formula may naturally yellow when exposed to prolonged sunlight. This is a cosmetic change and does not typically affect the sealant's performance. If aesthetics are critical, consider painting over the cured clear Flex Seal.

Especificaciones del producto

Garantía y soporte

Este producto viene con un Garantía limitada de 1 años from the manufacturer, Swift Response, LLC. For warranty claims or technical support, please refer to the contact information provided on the product packaging or visit the official Flex Seal websitio.

For additional safety information, please consult the Información de seguridad (PDF) documento.