1. Introducción
This manual provides instructions for the installation, operation, and maintenance of your Lepro 12V LED Strip Light. This flexible, non-waterproof LED tape light is designed for indoor decorative and accent lighting applications. Please read this manual thoroughly before installation and use.
2. Información de seguridad
- Adaptador de corriente: A 12V DC power adapter is No incluido and must be purchased separately. Ensure the power adapter's output voltage is exactly 12V. Using a higher voltage adapter will damage the LED strip.
- Quétage: El agua totaltage of the LED strip (18W for 16.4ft) must not exceed the maximum wattage rating of your power adapter.
- Calor: The LED strip operates at an extremely low heat, making it safe to touch.
- Resistencia al agua: Este producto es no impermeable and intended for indoor use only. Avoid exposure to water or high humidity.
- Manejo: The LED strip is flexible but fragile. Handle with care during installation to prevent tearing or damage to the PCB.
- Corte: Only cut the LED strip at designated cutting marks (every 3 LEDs) to avoid damaging the circuit.
3. Contenido del paquete
Verifique que todos los componentes estén presentes en su paquete:
- 1 x Lepro 12V LED Strip Light (16.4 ft)
- Accessories (e.g., connectors, clips - specific accessories may vary, power adapter not included)
Figure 3.1: Package Contents. Note: 12V power supply sold separately.
4. Especificaciones
| Característica | Detalle |
|---|---|
| Número de modelo | 4100057-WW |
| Tipo de luz | LED Strip Light (SMD 2835) |
| Longitud | 16.4 pies (metros 5) |
| Color claro | Blanco cálido |
| Temperatura de color | 3000 Kelvin |
| Volumentage | 12 V CC |
| Quétage | 18 vatios |
| Flujo luminoso | 1200 lúmenes |
| Número de LED | 300 |
| Regulable | No (no regulable) |
| Uso interior/exterior | Solo en interiores |
| Material | Silicona |
| Peso del artículo | 60 gramos (2.12 onzas) |
Eficiencia energética
Figura 4.1: Etiqueta de Eficiencia Energética. Para más detalles, visite eprel.ec.europa.eu/qr/1056793.
5. Instrucciones de configuración
5.1 Componentes superioresview
Figure 5.1: LED Strip Light Components. A 12V power supply is required and sold separately.
5.2 pasos de instalación
- Prepare la superficie: Ensure the surface where the LED strip will be applied is clean, dry, and smooth. Wipe the surface with a clean cloth to remove any dust or debris.
- Medir y cortar (opcional): If a shorter length is desired, measure the required length. The LED strip can be cut every 3 LEDs along the designated cutting marks. Use sharp scissors for a clean cut. Note: 2-pin 8mm connectors are not included if you cut the strip.
- Aplicar la tira: Peel off the protective backing from the self-adhesive tape on the back of the LED strip. Carefully press the strip onto the prepared surface, ensuring firm contact along its entire length.
- Conecte la electricidad: Conecte la tira LED a un adaptador de corriente de 12 V CC compatible (no incluido). Asegúrese de que la polaridad sea correcta.
Figure 5.2: Installation Process: Clean surface, peel adhesive, and cut at marks.
6. Instrucciones de funcionamiento
Once properly installed and connected to a 12V DC power adapter, the LED strip light will illuminate when the power adapter is plugged into an electrical outlet. This model is no regulable and does not include a controller. To turn the lights on or off, you must control the power supply directly (e.g., by plugging/unplugging or using a switched outlet).
6.1 Producto en uso
Figura 6.1: Example of Warm White LED Strip Light application in a living space.
Figure 6.2: Warm White 3000K LED lighting in a home environment.
6.2 Demostración en vídeo
Video 6.1: Warm White LED Lights Strip for Bedroom. This video demonstrates the appearance of the warm white LED strip lights in a bedroom setting.
7. Mantenimiento
- Limpieza: To clean the LED strip, ensure it is unplugged from the power source. Gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or immerse the strip in water.
- Manejo: Avoid bending the strip sharply or applying excessive force, as this can damage the internal circuitry.
- Almacenamiento: If storing the LED strip, roll it loosely on its original reel or a similar circular object to prevent kinks or damage.
8. Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| La tira de LED no se enciende. | Sin potencia, volumen incorrectotage, faulty power adapter, or damaged strip. | Ensure the 12V power adapter is correctly plugged in and functioning. Verify the power adapter output is 12V DC. Check for visible damage to the strip or connections. |
| Portions of the strip are not lighting up. | Damage to a section of the strip, incorrect cutting, or faulty connection. | Inspect the unlit section for physical damage or improper cuts. Ensure any connectors used are secure. |
| El adhesivo no sujeta la tira. | Surface was not clean or smooth, or adhesive has lost its stickiness. | Clean the surface thoroughly before application. For persistent issues, consider using additional adhesive clips or a stronger double-sided tape (e.g., hot glue as a temporary solution, as mentioned in customer reviews, but be aware of potential damage upon removal). |
9. Garantía y soporte
9.1 Información de garantía
This Lepro LED Strip Light comes with a 2 año de garantía from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.
9.2 Atención al cliente
For technical assistance, warranty claims, or any questions regarding your Lepro product, please contact Lepro customer support through the retailer's platform or visit the official Lepro websitio para información de contacto.
