Feit Electric LEDR56/827

Feit Electric LEDR56/827 Dimmable LED Retrofit Kit User Manual

Model: LEDR56/827

1. Producto terminadoview

The Feit Electric LEDR56/827 Dimmable LED Retrofit Kit is an energy-efficient lighting solution designed to replace traditional incandescent bulbs in 5-inch and 6-inch recessed can fixtures. This kit provides 1250 lumens of 2700K soft white light, equivalent to a 120-watt incandescent bulb, while consuming only 20.5 watts. It is fully dimmable and offers instant brightness, with an estimated lifespan of up to 50,000 hours (approximately 45.7 years based on 3 hours/day usage). The kit is Energy Star approved and includes a standard base adapter and a pre-mounted trim for easy installation.

Feit Electric LEDR56/827 Dimmable LED Retrofit Kit product packaging

Image 1.1: Packaging for the Feit Electric LEDR56/827 Dimmable LED Retrofit Kit, highlighting its 120W equivalent brightness and energy efficiency.

Características principales:

  • Eficiencia energética: 20.5W power consumption, 120W incandescent equivalent.
  • Brillo alto: 1250 lúmenes.
  • Temperatura de color: 2700K Soft White.
  • Regulable: Fully dimmable for adjustable light levels.
  • Larga vida útil: Up to 50,000 hours (45.7 years).
  • Compatibilidad: Fits most 5-inch and 6-inch recessed cans.
  • Certificaciones: Energy Star approved.

2. Información de seguridad

Before installing or servicing this product, please read and understand all safety instructions. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause personal injury or property damage.

  • ADVERTENCIA: Riesgo de descarga eléctrica. Desconecte la alimentación desde el fusible o disyuntor antes de realizar cualquier instalación o mantenimiento.
  • ADVERTENCIA: Risk of fire. Do not install this product in a luminaire that exceeds the wattage de la bombilla.
  • This product is for use with 120V, 60Hz circuits.
  • Adecuado para damp Ubicaciones.
  • Do not use with standard dimmers unless specified as compatible. Use only with dimmers designed for LED products.
  • Ensure the recessed can fixture is properly grounded.
  • No intente modificar el producto. Cualquier modificación podría anular la garantía y generar riesgos de seguridad.
  • Mantener alejado de los niños.

Advertencia sobre la Proposición 65: Este producto puede contener sustancias químicas reconocidas en el estado de California como causantes de cáncer, defectos de nacimiento u otros daños reproductivos.

3. Contenido del paquete

Verifique que todos los componentes estén presentes antes de comenzar la instalación.

  • 1x LED Retrofit Kit (integrated LED trim)
  • 1x Standard Base Adapter (E26 screw-in adapter)
Components of the Feit Electric LED Retrofit Kit, showing the LED trim and the E26 screw-in adapter.

Image 3.1: The LED retrofit kit components, including the main LED light unit and the screw-in adapter.

4. Instrucciones de instalación

This retrofit kit is designed for easy installation into existing 5-inch or 6-inch recessed can housings. No tools are typically required.

  1. Apagar la energía: Before starting, ensure the power to the recessed fixture is turned off at the circuit breaker or fuse box to prevent electrical shock.
  2. Retire la bombilla y la moldura existentes: Carefully remove the existing light bulb and any old trim from the recessed can fixture.
  3. Screw in Adapter: Screw the provided standard base (E26) adapter into the light socket of the recessed can. Ensure it is securely tightened.
  4. Conectar el cableado: Locate the orange connector on the LED retrofit kit. Plug this connector into the corresponding connector on the standard base adapter.
  5. Insertar en la lata: Gently push the LED retrofit kit into the recessed can opening. The spring clips on the sides of the LED unit will secure it in place against the ceiling. Ensure the trim is flush with the ceiling.
  6. Restaurar energía: Once the kit is securely installed, restore power at the circuit breaker.
  7. Prueba de luz: Encienda el interruptor de luz para verificar el funcionamiento correcto.
De cerca view of the Feit Electric LED Retrofit Kit showing the spring clips and electrical connector for installation.

Image 4.1: Detail of the LED retrofit kit, illustrating the spring clips for securing it in the recessed can and the connector for the E26 adapter.

5. Instrucciones de funcionamiento

The Feit Electric LEDR56/827 retrofit kit operates like a standard light fixture but offers dimming capabilities.

Encender/Apagar:

Use your existing wall switch to turn the light fixture on or off. The LED will provide instant full brightness.

Función de atenuación:

This LED retrofit kit is fully dimmable. To utilize the dimming feature, ensure you have an LED-compatible dimmer switch installed. Adjust the dimmer switch to achieve your desired light level. The 2700K Soft White color temperature provides a warm, inviting glow, ideal for living rooms, bedrooms, and dining areas.

Comparison of different light color temperatures: Soft White (2700K), Bright White (3000K), and Daylight (5000K), showing the visual effect of each.

Image 5.1: Visual representation of various color temperatures. This product provides 2700K Soft White light.

Chart illustrating different color temperatures (Soft White, Bright White, Cool White, Daylight) and their recommended uses in various room settings.

Image 5.2: A guide to choosing light temperatures, indicating that Soft White (2700K-3000K) is ideal for living rooms and resembles standard incandescent bulbs.

6. Mantenimiento

The Feit Electric LEDR56/827 LED Retrofit Kit requires minimal maintenance due to its long lifespan and integrated LED design.

  • Limpieza: Ensure power is off before cleaning. Wipe the trim and diffuser with a soft, dry, or slightly damp Paño. No utilice limpiadores abrasivos ni disolventes, ya que pueden dañar el acabado o los componentes eléctricos.
  • Reemplazo de LED: The LEDs are integrated and not user-replaceable. The unit is designed for a long operational life. If the LED fails, the entire unit should be replaced.
  • Inspección: Inspeccione periódicamente la luminaria para detectar cualquier daño o conexión suelta. Si detecta algún problema, desconecte la alimentación y consulte a un electricista cualificado.

7. Solución de problemas

If you experience issues with your LED retrofit kit, refer to the following common problems and solutions:

ProblemaPosible causaSolución
La luz no se enciende.
  • No hay energía en el dispositivo.
  • Conexión suelta.
  • Faulty fixture or LED unit.
  • Compruebe el disyuntor o el fusible.
  • Ensure adapter is screwed in tightly and connector is secure.
  • Contact customer support if steps above do not resolve the issue.
La luz parpadea o se atenúa incorrectamente.
  • Interruptor de regulación incompatible.
  • Conexión de cableado suelta.
  • Asegúrese de utilizar un regulador de intensidad compatible con LED.
  • Check all connections are secure (with power off).
La luz no está al ras del techo.
  • Clips de resorte no completamente acoplados.
  • Obstruction in the recessed can.
  • Gently push the unit further into the can until clips engage.
  • Remove any debris or obstructions from the can.

8. Especificaciones

Número de modeloLEDR56/827
MarcaFeit eléctrico
Quétage20.5 vatios
Equivalente incandescente120 vatios
Brillo1250 Lumens (1245 Lumens listed in some specs)
Temperatura de color2700K blanco suave
Regulable
Esperanza de vida50,000 horas (aprox. 45.7 años)
Volumentage120 voltios
Base de la bombillaE26 (Estándar)
Tipo de accesorioRecessed Retrofit Kit
Compatibilidad5 & 6 Inch Recessed Cans
Uso en interiores y exterioresInterior (Apto para damp ubicaciones)
CertificacionesEnergy Star, UL, cUL
Peso del artículo0.66 libras (10.5 onzas)

9. Garantía y soporte

According to the product specifications, there is no explicit warranty provided for this item. For technical support or inquiries regarding the Feit Electric LEDR56/827 Dimmable LED Retrofit Kit, please contact Feit Electric customer service.

Normalmente puede encontrar información de contacto en el sitio web oficial del fabricante. websitio o en el embalaje del producto.

Feit eléctrico Websitio: www.feit.com

Documentos relacionados - LEDR56/827

Preview Guía de instalación e instrucciones de seguridad de la luz empotrada LED Feit Electric de 5-6 pulgadas
Guía completa para la instalación de la luz LED empotrada de 5-6 pulgadas de Feit Electric, que incluye instrucciones de seguridad, especificaciones del producto y selección de temperatura de color. Modelo LEDR56B/6WYCA/MP/6.
Preview Guía de instalación de foco LED empotrable Feit Electric de 4 pulgadas con 5 temperaturas de color
Guía de instalación e instrucciones de seguridad para la lámpara empotrada LED de 4 pulgadas de Feit Electric (modelo LEDR4XHO/6WYCA/4). Ofrece 5 temperaturas de color blanco seleccionables, funcionamiento regulable y es apta para entornos húmedos. Aprenda a instalar esta versátil luminaria para el hogar.
Preview Guía de instalación de la caja de conexiones de la luz empotrada LED Retrofit de Feit Electric
Instrucciones paso a paso para instalar el kit de iluminación empotrada LED Retrofit de Feit Electric, centrándose en la instalación de la caja de conexiones (J-Box), incluido el cableado y el montaje en el techo.
Preview Guía de instalación de la luz empotrada LED Feit Electric de 5-6 pulgadas
Guía de instalación completa para la luz LED empotrada Feit Electric de 5-6 pulgadas con 5 opciones de temperatura de color blanco. Incluye instrucciones de seguridad, premontaje, especificaciones y pasos de instalación detallados para diferentes tipos de carcasa.
Preview Lámpara de techo LED plana regulable FEIT Electric de 7.5 pulgadas con color seleccionable - Guía de uso y cuidado 74206/6WYCA
Explore la lámpara de techo redonda plana blanca regulable FEIT Electric de 7.5 pulgadas (modelo 74206/6WYCA). Esta guía proporciona instrucciones esenciales de uso y cuidado, pasos de instalación para montaje en caja de conexiones y empotrada, y detalles sobre cómo seleccionar la temperatura de color.
Preview Feit Electric LEDR6XT/6WYCA/6: Guía de instalación de la luz descendente LED de 6 pulgadas con color seleccionable
Guía de instalación completa para la luz LED empotrada de 6 pulgadas Feit Electric LEDR6XT/6WYCA/6. Conozca la seguridad, el contenido del paquete, las clasificaciones del producto, la selección de colores y las instrucciones de instalación paso a paso.