BWT AQA life S Water Softener System

1. Producto terminadoview

The BWT AQA life S is a compact water softener system designed to provide soft, pearl-like BWT water around the clock, ideal for single-family homes. Utilizing proven AQA perla technology, this duplex-pendulum system ensures a continuous supply of softened water, protecting your household appliances and plumbing from limescale buildup.

Figura 1: Frente view of the BWT AQA life S Water Softener System.

2. ¿Qué hay en la caja?

Al desembalar, asegúrese de que todos los componentes estén presentes y sin daños:

• BWT AQA life S Water Softener System unit
• Manual de instrucciones (este documento)
• Necessary connection accessories (may vary by package)

3. Configuración e instalación

Installation of the BWT AQA life S system should be performed by a qualified professional to ensure proper function and compliance with local plumbing regulations. The system requires connection to the main water supply and a wastewater drain.

Figura 2: Interna view of the BWT AQA life S, showing key components for professional installation.

Consideraciones importantes:

• Ubicación: Choose a location that is protected from frost and direct sunlight, with sufficient space for maintenance and salt refilling.
• Drenaje: The system requires a connection to a wastewater drain. Ensure the drain point is lower than the system's outlet for proper gravity drainage, or use a lift pump if necessary.
• Salt Filling: The salt container has a specific opening for refilling. Use only BWT regeneration salt tablets (broxetten) as recommended by the manufacturer.

4. Instrucciones de funcionamiento

The BWT AQA life S operates largely automatically once installed and configured. Its primary function is to remove hardness minerals from your water through an ion-exchange process, which requires regeneration salt.

Recarga de sal:

• Regularly check the salt level in the brine tank. The frequency depends on your water consumption and hardness.
• Refill the salt when the level is low, ensuring it does not drop below the minimum mark.
• When refilling, carefully pour the salt into the designated opening. Avoid spilling salt into other compartments.

Calidad del agua:

• The system is designed to reduce water hardness. Depending on the raw water hardness, the sodium content in the softened water may increase. Consult local water quality guidelines if you have concerns about sodium intake.

5. Mantenimiento

Proper maintenance ensures the longevity and efficiency of your BWT AQA life S system.

• Salt Level Check: As mentioned in operating instructions, regularly monitor and refill the salt level.
• Servicio anual: It is highly recommended to have the system serviced annually by a certified BWT technician. This ensures optimal performance, checks for wear and tear, and addresses any potential issues.
• Higiene: To prevent bacterial contamination, the use of recommended disinfection agents (e.g., DIOXAL) during service may be advised.

6. Solución de problemas

If you encounter issues with your BWT AQA life S system, consider the following common points before contacting support:

• No Soft Water: Check the salt level. Ensure the system is powered on and there are no error messages on the display (if applicable).
• Sonido de alarma: The system may emit an alarm sound to indicate a problem (e.g., low salt, malfunction). Consult the display for specific error codes. The alarm volume may be fixed and require professional adjustment.
• Salt Bridge: Sometimes, salt can solidify in the tank, forming a 'salt bridge' that prevents proper dissolution. Gently break up any visible salt bridges with a non-sharp object.
• Fugas: If you notice any leaks, immediately shut off the water supply to the unit and contact a professional.

For complex issues or persistent problems, it is always best to contact a qualified BWT service technician.

7. Especificaciones

8. Garantía y soporte

Your BWT AQA life S system is covered by the manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions.

For technical support, service appointments, or inquiries regarding your BWT product, please contact BWT customer service or visit the official BWT website. Regular maintenance by authorized personnel is crucial for maintaining warranty validity and optimal system performance.

Puede encontrar más información y datos de contacto en el BWT Store on Amazon.