Introducción
This manual provides instructions for the installation, operation, and maintenance of your SOMFY Situo RTS Pure radio wall transmitter. This device is designed for the manual control of one or more radio-controlled Somfy drives, such as blinds, awnings, or roller shutters. Please read this manual carefully before using the product to ensure safe and correct operation.
Instrucciones de seguridad
- Mantenga el dispositivo alejado de la humedad y temperaturas extremas.
- No intente abrir ni reparar el dispositivo usted mismo. Encargue cualquier reparación a personal cualificado.
- Asegúrese de que la batería esté insertada correctamente según las marcas de polaridad.
- Deseche las baterías usadas de manera responsable de acuerdo con las regulaciones locales.
- Este dispositivo está diseñado únicamente para uso en interiores.
Producto terminadoview
The SOMFY Situo RTS Pure is a sleek, handheld radio transmitter designed for intuitive control of your Somfy RTS products.
Esta imagen muestra el frente view of the SOMFY Situo RTS Pure radio wall transmitter. It is a white, rectangular device with three gray circular buttons arranged vertically in the center: an 'up' arrow, a 'my' button, and a 'down' arrow. Below the buttons, there is a small black indicator light. The Somfy logo is subtly embossed at the bottom.
Componentes clave:
- Botón de arriba (^): Moves the connected drive upwards (e.g., opens blinds).
- My Button (my): Stops the drive or recalls a pre-programmed favorite position.
- Botón abajo (v): Moves the connected drive downwards (e.g., closes blinds).
- Luz indicadora: Provides visual feedback on commands and battery status.
- Programming Button (rear): Used for pairing the transmitter with Somfy RTS drives.
Configuración
1. Instalación de la batería
- Gently slide open the battery compartment cover on the back of the transmitter.
- Insert the supplied battery (type CR2430) ensuring correct polarity (+/-).
- Cierre bien la tapa del compartimento de la batería.
2. Pairing with a Somfy RTS Drive
To control a Somfy RTS drive, the transmitter must first be paired. This process typically involves using an existing paired transmitter or the drive's programming button.
- Using an existing transmitter: Take an already programmed RTS transmitter that controls the desired drive. Press and hold its programming button (usually on the back) until the drive moves briefly.
- Immediately after the drive moves, take your new Situo RTS Pure transmitter. Press and hold its programming button (located on the back, often recessed) until the drive moves briefly again. This confirms successful pairing.
- Without an existing transmitter: Refer to the specific instructions for your Somfy RTS drive to put it into programming mode. Once the drive is in programming mode, press the programming button on your Situo RTS Pure transmitter until the drive moves briefly.
Note: If you are pairing with multiple drives, repeat the process for each drive or group of drives.
Instrucciones de funcionamiento
Control básico:
- To move the drive up (e.g., open blinds), press the ^ botón.
- To move the drive abajo (e.g., close blinds), press the v botón.
- A detener the drive at any point, press the my botón.
Setting a Favorite Position ('my' position):
- Move the drive to your desired favorite position using the ^ or v botones.
- Once at the desired position, press and hold the my button until the drive moves briefly. This saves the position.
Recalling a Favorite Position:
- From any position, a short press of the my button will move the drive to its pre-programmed favorite position.
Mantenimiento
Reemplazo de batería:
When the indicator light on the transmitter no longer illuminates or the range decreases significantly, it is time to replace the battery.
- Slide open the battery compartment cover on the back of the transmitter.
- Retire la batería CR2430 vieja.
- Inserte una nueva batería CR2430, observando la polaridad correcta (+/-).
- Cierre la tapa del compartimento de la batería.
Note: Dispose of old batteries according to local environmental regulations.
Limpieza:
Clean the transmitter with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| El transmisor no responde. | Batería muerta. | Reemplace la batería. |
| Rango operativo reducido. | Low battery or radio interference. | Replace battery. Check for sources of interference (e.g., large metal objects, other radio devices). |
| Drive does not respond after pairing. | Pairing unsuccessful or drive is not powered. | Repeat the pairing process. Ensure the drive has power. |
Presupuesto
- Modelo: Situo RTS Pure
- Número de modelo del fabricante: 322147
- Marca: Somfy
- Frecuencia de radio: 433.42 MHz
- Rolling Code System: Sí
- Rango: Approximately 20 meters (indoors, depending on environment)
- Tipo de batería: CR2430 (incluido)
- Dimensiones: 1 x 1 x 1 cm (approximate, as per product data); 60 grams
- Uso previsto: Interior
Garantía y soporte
Para obtener información sobre la garantía y asistencia técnica, consulte el sitio web oficial de Somfy. website or contact your local Somfy dealer. Keep your proof of purchase for warranty claims.
Recursos en línea: www.somfy.com
