KeylessOption Key Fob Instruction Manual

Introducción

This manual provides detailed instructions for the KeylessOption 3-button key fob remote, model KPT1660, designed as a replacement for compatible Toyota and Pontiac vehicles. It includes information on product components, vehicle compatibility, programming procedures, and general usage.

Imagen: Frente view of the KeylessOption 3-button key fob remote, showing Lock, Unlock, and Trunk/Panic buttons.

Qué incluye

Image: The package contents, including the key fob remote, a ring loop, and a pre-installed CR2032 battery.

• KeylessOption 3-button remote (Model KPT1660)
• Batería CR2032 preinstalada
• Programming instructions guide

Compatibilidad

This key fob is compatible with specific Toyota and Pontiac vehicle models and years. Please verify your vehicle's original keyless entry system and FCC ID to ensure compatibility.

Image: The front and back of the key fob, highlighting the FCC ID GQ43VT14T and Part Number 89742-AA030 for compatibility verification.

Vehículos compatibles:

• Toyota Camry: 1999-2006
• Toyota Solara: 1998-2003
• Toyota Matrix: 2003-2008
• Toyota Sienna: 1998-2003
• Pontiac Vibe: 2003-2008

Nota importante: This item will not work if your original remote has a red light indicator. Ensure your vehicle is equipped with factory original keyless entry.

ID DE LA FCC: GQ43VT14T

Número de pieza: 89742-AA030

Configuración y Programación

The KeylessOption key fob is designed for self-programming. Follow these step-by-step instructions carefully. All steps must be performed within the specified timeframes.

Image: Graphic indicating "DIY Self Programming" for the key fob, emphasizing it is fast, easy, and free.

Procedimiento de programación:

1. Preparación:
   • Ensure the key is out of the ignition.
   • The driver's door must be open, all other doors closed and locked.
   • The driver's door must be unlocked.
2. Initial Key Cycle (within 5 seconds):
   • Insert the key into the ignition (DO NOT Turn). Pull the key out.
   • Insert the key into the ignition (DO NOT Turn). Pull the key out.
3. Door Cycle 1 (within 40 seconds):
   • Close then open the driver's door.
   • Close then open the driver's door.
   • Insert the key into the ignition (DO NOT Turn). Pull the key out.
4. Door Cycle 2 and Ignition (within 40 seconds):
   • Close then open the driver's door.
   • Close then open the driver's door.
   • Inserte la llave en el encendido y déjela allí.
   • Close the driver's door.
   • Turn the ignition to ON (DO NOT Start) then back to OFF.
   • Retire la llave del encendido.
5. Programming Mode Confirmation:
   • Within 3 seconds, the power door locks should lock then unlock automatically. This indicates successful entry into programming mode. If locks do not cycle, return to step 1.
6. Remote Programming (within 40 seconds):
   • Presione el CERRAR y DESCUBRIR buttons on the remote simultaneously for 1.5 seconds.
   • Inmediatamente después de la releasing el CERRAR y DESCUBRIR botones, presione el CERRAR button by itself and hold for 2 seconds.
   • Within 3 seconds, the door locks should lock and then unlock once, indicating successful programming. If the door locks cycle twice, repeat the previous two sub-steps (pressing LOCK and UNLOCK simultaneously, then LOCK alone) as the remote was not accepted.
   • Repeat the previous two sub-steps for each additional new remote you wish to program.
7. Salir del modo de programación:
   • Open the driver's door to exit programming mode.

Operación del llavero

The KeylessOption key fob features three distinct buttons for controlling your vehicle's keyless entry functions.

Image: Diagram showing the front of the key fob with labels pointing to the Lock, Unlock, and Trunk/Panic buttons.

• Botón de bloqueo: Presione una vez para bloquear todas las puertas del vehículo.
• Botón DESBLOQUEAR: Presione una vez para desbloquear todas las puertas del vehículo.
• TRUNK / PANIC Button: This button typically activates the trunk release. Holding this button down for a few seconds will activate the vehicle's panic alarm.

Imagen: Parte posterior view of the key fob, showing the red panic button.

Mantenimiento

Reemplazo de batería:

The key fob uses one CR2032 lithium coin cell battery. When the remote's range decreases or it stops responding, it may be time to replace the battery.

1. Carefully pry open the key fob casing utilizando un pequeño destornillador de punta plana o una herramienta de palanca.
2. Localice la batería CR2032 dentro del casing.
3. Remove the old battery, noting its orientation (positive side up).
4. Inserte una nueva batería CR2032 con el lado positivo (+) hacia arriba.
5. Encaja el llavero casinVuelva a colocarlos de forma segura.

Cuidado general:

• Evite exponer el llavero a temperaturas extremas, luz solar directa durante períodos prolongados o humedad.
• No deje caer el llavero ni lo someta a impactos fuertes.
• Clean the exterior with a soft, dry cloth if necessary.

Solución de problemas

Presupuesto

• Número de modelo: KPT1660
• ID DE LA FCC: GQ43VT14T
• Dimensiones del producto: 2 x 0.75 x 4 pulgadas
• Peso del artículo: 0.317 onzas
• Tipo de batería: 1 x CR2032 (preinstaladas)
• Color: Negro

Garantía y soporte

KeylessOption products are designed for reliability and performance. For any issues or questions regarding your key fob, please contact KeylessOption customer support.

While specific warranty details are not provided in this manual, KeylessOption is committed to customer satisfaction. For support, please visit the official KeylessOption store on Amazon or contact their customer service directly through your purchase platform.

You can find more information and contact details by searching for "KeylessOption" on Amazon or by visiting their brand store:

Visit the KeylessOption Amazon Store