Introducción
This manual provides instructions for the proper installation and maintenance of the Leviton 003-84026-0 Stainless Steel 2-Gang Power Outlet Receptacle Wallplate. Please read these instructions carefully before beginning installation.
Información de seguridad
- Always turn off power at the circuit breaker or fuse box before installation or maintenance.
- Ensure all wiring connections comply with local electrical codes.
- Si no está seguro de alguna parte de estas instrucciones, consulte a un electricista calificado.
- Este producto está diseñado únicamente para uso en interiores.
Contenido del paquete
- Leviton 003-84026-0 Stainless Steel 2-Gang Wallplate
- Mounting Screws (typically included with wallplate)
Configuración e instalación
- Apagar la energía: Locate the circuit breaker or fuse that controls the power to the outlet where the wallplate will be installed. Turn off the power completely. Verify power is off using a voltage probador.
- Retire la placa de pared vieja: Carefully unscrew and remove the existing wallplate, if any.
- Coloque la nueva placa de pared: Align the Leviton 003-84026-0 wallplate over the electrical box, ensuring the openings match the receptacles.
- Placa de pared segura: Insert the provided mounting screws into the designated holes on the wallplate and tighten them gently until the wallplate is flush with the wall. Do not overtighten, as this can damage the wallplate or the electrical box.
- Restaurar energía: Once the wallplate is securely installed, restore power at the circuit breaker or fuse box.
Instrucciones de funcionamiento
The Leviton 003-84026-0 wallplate is a passive component designed to cover and protect electrical outlets. No specific operational steps are required beyond its proper installation. Ensure that the receptacles are fully accessible and that the wallplate does not obstruct their use.
Mantenimiento
- Limpieza: To clean the stainless steel wallplate, use a soft, damp cloth. For stubborn marks, a mild, non-abrasive cleaner suitable for stainless steel can be used. Avoid harsh chemicals or abrasive scrubbers, which can scratch the finish.
- Inspección: Periodically inspect the wallplate for any signs of damage, such as cracks, discoloration, or loose screws. If damage is observed, turn off power and replace the wallplate.
Solución de problemas
- Wallplate is Loose: Ensure mounting screws are tightened appropriately. Do not overtighten.
- La placa de pared no queda al ras: Check for obstructions behind the wallplate or ensure the electrical box is properly recessed.
- Rasguños o decoloración: Refer to the Maintenance section for cleaning instructions. Deep scratches may require replacement.
Presupuesto
| Marca | Levitón |
| Número de modelo | 003-84026-0 |
| Configuración | 2-Gang (Double) |
| Color | Acero inoxidable |
| Tipo de acabado | Pintado |
| Tipo de instalación | Atornillar |
| Peso del artículo | 2.56 onzas |
| Dimensiones del producto | 4.5 x 4.5 x 0.33 pulgadas |
| Código Postal | 078477431306 |
This diagram illustrates the precise dimensions of the 2-gang wallplate. It shows a width of 2.750 inches (69.85 mm) for each opening, a total width of 4.56 inches (115.9 mm) for the 2-gang configuration, and a height of 4.500 inches (114.30 mm). The thickness is 0.220 inches (5.59 mm). Screw hole spacing and opening dimensions are also detailed.
Información de garantía
Leviton products are backed by a limited warranty. For specific warranty terms and conditions, please refer to the official Leviton webSitio web o contacte con atención al cliente. Conserve su comprobante de compra para reclamaciones de garantía.
Soporte y contacto
For technical assistance, product inquiries, or support, please visit the official Leviton websitio o contacte con su departamento de atención al cliente. La información de contacto normalmente se encuentra en la ficha del fabricante. websitio o embalaje del producto.
- Fabricante: Levitón
- Websitio: www.leviton.com
