InSinkErator Instant Hot Water Tank HWT-00 Instruction Manual

Introducción

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your InSinkErator Instant Hot Water Tank, Model HWT-00. Please read all instructions carefully before use.

The InSinkErator HWT-00 Instant Hot Water Tank is designed to provide near-boiling water (approximately 200 degrees F inside the tank) directly at your kitchen sink. This 2/3-gallon stainless steel tank features an easily adjustable thermostat and a 750-watt heating element for quick and convenient hot water access.

Información importante de seguridad

ADVERTENCIA: Este producto puede exponerlo a sustancias químicas, incluido el plomo, que el estado de California reconoce como causante de cáncer y defectos de nacimiento u otros daños reproductivos. Para más información vaya a www.P65Warnings.ca.gov.

Siga siempre las precauciones básicas de seguridad al utilizar aparatos eléctricos para reducir el riesgo de incendio, descarga eléctrica y lesiones personales.

• Lea todas las instrucciones antes de utilizar el aparato.
• No toque superficies calientes. Utilice asas o perillas.
• Para protegerse contra descargas eléctricas, no sumerja el cable, los enchufes ni el aparato en agua ni en ningún otro líquido.
• Es necesaria una estrecha supervisión cuando cualquier aparato sea utilizado por niños o cerca de ellos.
• Desenchufe el aparato del tomacorriente cuando no lo utilice y antes de limpiarlo. Deje que se enfríe antes de colocar o quitar piezas.
• No utilice ningún aparato que tenga un cable o enchufe dañados o que presente algún tipo de avería o daño. Devuelva el aparato al centro de servicio autorizado más cercano para que lo examinen, lo reparen o lo ajusten.
• El uso de accesorios no recomendados por el fabricante del aparato puede provocar lesiones.
• No utilizar en exteriores.
• No deje que el cable cuelgue del borde de la mesa o mostrador, ni que toque superficies calientes.
• No lo coloque sobre o cerca de un quemador de gas o eléctrico caliente, ni dentro de un horno caliente.
• Siempre conecte primero el enchufe al aparato y luego el cable a la toma de corriente. Para desconectarlo, apague cualquier control y desenchúfelo de la toma de corriente.
• No utilice el aparato para ningún fin distinto del previsto.

¿Qué hay en la caja?

Your InSinkErator Instant Hot Water Tank package includes:

• 2/3-Gallon Stainless Steel Instant Hot Water Tank (HWT-00)

Note: Faucet and water filtration system are sold separately.

Configuración e instalación

The InSinkErator HWT-00 is designed for easy DIY installation under your sink. Ensure you have a standard under-sink outlet available for the tank's power cord.

Pasos de instalación terminadosview:

1. Prepare el área: Clear the under-sink cabinet space. Ensure access to cold water supply and a grounded electrical outlet.
2. Montar el tanque: Securely mount the tank in an upright position within the under-sink cabinet. The tank features tool-free connections for convenience.
3. Conectar líneas de agua: Connect the cold water supply line to the tank's inlet. Connect the hot water outlet from the tank to your instant hot water faucet (sold separately). Ensure all connections are secure to prevent leaks.
4. Instalar grifo (si corresponde): If installing a new faucet, follow the faucet's specific instructions. The HWT-00 is compatible with all InSinkErator instant hot water faucets.
5. Conecte la electricidad: Once all water connections are secure and the tank is filled with water, plug the tank's power cord into the standard under-sink outlet. The unit includes dry start protection.
6. Limpiar el sistema: Before first use, flush the system according to the faucet's instructions to remove any air and ensure proper operation.

Visual Guide: Installation Components

Image: The InSinkErator HWT-00 Instant Hot Water Tank, showcasing its compact design suitable for under-sink installation.

Image: A close-up of the InSinkErator HWT-00 tank, highlighting its adjustable temperature dial for precise heat control.

Instrucciones de funcionamiento

Your InSinkErator HWT-00 Instant Hot Water Tank is designed for simple operation, providing near-boiling water on demand.

Ajuste de temperatura:

• The tank features an easily adjustable thermostat. Locate the temperature control knob on the front of the tank.
• Turn the knob to adjust the desired water temperature. The manufacturer's recommended setpoint is approximately 200 degrees F for optimum performance.
• Allow a few minutes for the water to reach the newly set temperature after adjustment.

Dispensación de agua caliente:

• To dispense hot water, activate your compatible InSinkErator instant hot water faucet (sold separately) according to its specific operating instructions.
• The tank will continuously supply near-boiling water as long as the faucet is activated, up to its 2/3-gallon capacity.

Uso Exampellos:

Image: A person filling a teapot with hot water from an instant hot water faucet, demonstrating its use for hot beverages.

Image: A person preparing a baby bottle with hot water from an instant hot water faucet, highlighting its convenience for quick tasks.

Image: A person filling a cooking pot with hot water from an instant hot water faucet, illustrating its use for accelerating cooking processes.

Image: A person cleaning a bowl with hot water from an instant hot water faucet, showing its utility for cleaning and sanitizing.

Mantenimiento

Proper maintenance ensures the longevity and optimal performance of your InSinkErator Instant Hot Water Tank.

Water Filter Compatibility:

• The HWT-00 tank is compatible with InSinkErator under-sink water filtration systems (sold separately).
• Using a compatible filter can help reduce contaminants like PFOA/PFOS, herbicides, pesticides, VOCs, lead, mercury, asbestos, chlorine, and more, improving water taste and quality.
• Refer to your filter system's instructions for recommended replacement schedules, typically every 6 months.

Solución de problemas

If you encounter issues with your InSinkErator Instant Hot Water Tank, please refer to the following common troubleshooting tips:

• Sin agua caliente:
  • Compruebe si la unidad está enchufada a una toma eléctrica que funcione.
  • Ensure the temperature control knob is set to a desired hot temperature.
  • Verify that the water supply valve to the tank is fully open.
  • Allow sufficient time for the tank to heat water, especially after initial setup or if the tank was recently drained.
• El agua no está lo suficientemente caliente:
  • Ajuste la perilla de control de temperatura a un valor más alto.
  • Ensure the tank is not being overused, which might temporarily reduce water temperature.
• Fugas:
  • Check all water connections for tightness. Ensure they are hand-tightened and then given an additional quarter turn with a wrench.
  • Inspect hoses for any visible damage or kinks.
  • If a filter is installed, ensure it is correctly seated and not leaking.
• Flujo de agua lento:
  • If a water filter is installed, it might be clogged and require replacement.
  • Check the water supply valve for full opening.

If problems persist, please contact InSinkErator customer support for assistance.

Presupuesto

Garantía y soporte

Your InSinkErator Instant Hot Water Tank is backed by a 3-Year "We Come to You" Limited Warranty. For full details, please refer to the product warranty documentation included with your purchase or visit the official InSinkErator websitio.

For technical support, troubleshooting assistance, or warranty claims, please contact InSinkErator customer service.