Introducción
Thank you for choosing the Whynter BR-130SB Beverage Refrigerator. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your appliance. Please read it thoroughly before use and retain it for future reference.
Image: The Whynter BR-130SB beverage refrigerator, showcasing its capacity filled with various beverage cans.
Información de seguridad
Para reducir el riesgo de incendio, descarga eléctrica o lesiones al utilizar su aparato, siga estas precauciones básicas:
- Lea todas las instrucciones antes de utilizar el aparato.
- Conéctelo solo a tomacorrientes debidamente conectados a tierra.
- No opere si el cable de alimentación está dañado.
- Do not allow children to climb, stand, or hang on the shelves or door.
- Desenchufe el aparato antes de limpiarlo o realizarle mantenimiento.
- Asegure una ventilación adecuada alrededor de la unidad.
Configuración e instalación
Desembalaje
Carefully remove all packaging materials. Ensure all components are present and undamaged. Keep packaging materials for future transport if needed.
Colocación
This appliance is designed for freestanding installation. Allow at least 5 inches of space between the back and sides of the unit and any adjacent walls to ensure proper air circulation. Place the unit on a flat, level, and sturdy surface away from direct sunlight and heat sources. Avoid placing in areas with extreme temperatures.
Image: The Whynter BR-130SB beverage refrigerator positioned in a room, demonstrating its freestanding design and aesthetic integration.
Conexión eléctrica
Ensure the appliance is connected to a dedicated, grounded 115V/60Hz electrical outlet. Do not use extension cords or adapter plugs.
Inversión de puerta
The door hinges are reversible, allowing the door to open from either the left or right side. Refer to the detailed diagrams in the full user manual for specific instructions on reversing the door swing.
Image: A diagram illustrating how the door of the beverage refrigerator can be reversed to open from either the left or right side.
Instrucciones de funcionamiento
Puesta en marcha inicial
After installation, allow the unit to stand upright for at least 2-4 hours before plugging it in. This allows the refrigerant to settle. Once plugged in, the unit will begin cooling.
Control de temperatura
The Whynter BR-130SB features an adjustable temperature range, typically from high 30°F to mid 60°F. Use the control panel, usually located inside the unit or on the top front, to set your desired temperature. Refer to the control panel diagram in the full manual for specific button functions.
Image: An illustration highlighting the internal fan-forced circulation system, which ensures even temperature distribution throughout the cabinet for powerful and consistent cooling.
Iluminación Interna
The unit is equipped with soft LED interior lighting. This light can be manually turned on or off via a switch, allowing you to view contents without opening the door.
Imagen: Un primer plano view of the soft blue LED lighting inside the beverage refrigerator, illuminating the stored cans.
Estantes ajustables
The refrigerator includes 5 slide-out wire shelves. These shelves can be repositioned to accommodate various sizes of cans and bottles, optimizing storage capacity. To adjust, carefully slide the shelves out and reinsert them into the desired slots.
Image: The beverage refrigerator with its door open, displaying the adjustable wire shelves and indicating the unit's dimensions.
Image: A person arranging various beverages inside the refrigerator, highlighting its spacious interior and flexible storage options.
Mantenimiento
Limpieza
Regular cleaning helps maintain the appearance and efficiency of your appliance. Unplug the unit before cleaning. Wipe interior and exterior surfaces with a damp cloth and mild detergent. Do not use abrasive cleaners or solvents. Ensure the door gasket is clean and free of debris to maintain a proper seal.
Antihielo
This unit features manual defrost. Over time, frost may accumulate on the interior cooling surfaces. When frost buildup exceeds 1/4 inch, manually defrost the unit. To defrost, unplug the appliance, remove all contents, and leave the door open. Place towels at the bottom to absorb melted ice. Once defrosted, clean and dry the interior before restarting.
Eficiencia energética
The double-pane glass door provides enhanced insulation, contributing to consistent cooling and energy efficiency. Minimize door openings to maintain stable internal temperatures.
Imagen: Un detalle view of the double-pane glass door, emphasizing its construction for insulation and UV protection.
Image: A diagram showing the double-pane tempered glass door and its ability to provide UV isolation, protecting beverages from light damage.
Solución de problemas
Antes de ponerse en contacto con el servicio de atención al cliente, vuelva aview Los siguientes problemas comunes y soluciones:
- El aparato no funciona: Compruebe si el cable de alimentación está bien enchufado. Verifique el disyuntor o el fusible.
- El aparato no enfría lo suficiente: Ensure the temperature setting is appropriate. Check for excessive door openings or obstructions preventing the door from closing fully. Verify proper ventilation around the unit.
- Ruido excesivo: Ensure the unit is on a level surface. Check if any components are vibrating against each other. Normal compressor operation produces some sound.
- Frost buildup: This is normal for manual defrost units. Refer to the defrosting instructions in the Maintenance section.
For issues not resolved by these steps, please contact Whynter customer support.
Presupuesto
| Característica | Detalle |
|---|---|
| Marca | porquénter |
| Información del modelo | BR-130SB |
| Peso del artículo | 57 libras |
| Dimensiones del producto (Pr. x An. x Al.) | 18.75 x 17 x 32.5 pulgadas |
| Capacidad | 3.1 pies cúbicos (aproximadamente 127 latas estándar de 12 oz) |
| Consumo anual de energía | 1 vatios |
| Nivel de ruido | 44 dB |
| Tipo de instalación | Freestanding |
| Características especiales | Adjustable Shelves, Internal fan-forced circulation |
| Color | Acero inoxidable |
| Volumentage | 115 voltios |
| Sistema de descongelación | Manual |
| Bisagras de puerta | Reversible |
| Tipo de estante | Cable |
| Número de estantes | 5 |
| Proceso de dar un título | ETL |
| Tipo de material | Acero inoxidable |
| Componentes incluidos | 5 slide-out wire shelves |
Información de garantía
Whynter products are manufactured to the highest quality standards. Specific warranty details, including coverage period and terms, are typically provided with your purchase documentation or can be found on the official Whynter webSitio web. Conserve su comprobante de compra para reclamaciones de garantía.
Atención al cliente
For technical assistance, troubleshooting beyond this manual, or to inquire about parts and service, please contact Whynter Customer Support. You can find contact information on the official Whynter websitio o a través de su minorista.
Visita el Whynter Store para obtener más información sobre el producto.
