Introducción
This manual provides comprehensive instructions for the safe and efficient operation, maintenance, and troubleshooting of your AstralPool Pulit Advance +5 Robotic Pool Cleaner. Please read this manual thoroughly before using the appliance.
Image: The AstralPool Pulit Advance +5 Robotic Pool Cleaner, a blue and dark blue unit with a handle, designed for efficient pool cleaning.
Instrucciones de seguridad importantes
- Desconecte siempre la fuente de alimentación antes de realizar cualquier mantenimiento o limpieza.
- Do not operate the cleaner if the power cable is damaged.
- Asegúrese de que la fuente de alimentación esté colocada al menos a 3.5 metros (11.5 pies) del borde de la piscina.
- No entre a la piscina mientras el limpiador esté en funcionamiento.
- Este aparato no está diseñado para ser utilizado por personas con capacidades físicas, sensoriales o mentales reducidas, o con falta de experiencia y conocimientos, a menos que hayan recibido supervisión o instrucciones sobre el uso del aparato por parte de una persona responsable de su seguridad.
Configuración y uso inicial
Desembalaje
Retire con cuidado todos los componentes del embalaje. Compruebe que estén todas las piezas:
- Pulit Advance +5 Robotic Pool Cleaner unit
- Unidad de fuente de alimentación
- 18m self-floating cable
- Transport caddy
- PVA brushes
- Standard filter cartridges (fine and coarse filters available separately)
Image: The AstralPool Pulit Advance +5 cleaner shown with its transport caddy and the coiled self-floating cable, ready for setup.
Connecting the Cleaner
- Place the power supply unit in a shaded area, at least 3.5 meters (11.5 feet) from the pool edge.
- Connect the self-floating cable to the cleaner unit. Ensure a secure connection.
- Connect the other end of the self-floating cable to the power supply unit.
- Conecte la fuente de alimentación a una toma eléctrica con conexión a tierra.
Instrucciones de funcionamiento
Colocación del limpiador en la piscina
Gently lower the cleaner into the pool. Allow it to sink to the bottom, releasing any trapped air bubbles. Ensure the cable is not tangled.
Imagen: Un frente view of the AstralPool Pulit Advance +5, highlighting its compact design and the "Powered by Aquabot" branding.
Iniciar un ciclo de limpieza
Once the cleaner is at the bottom of the pool and the power supply is connected, press the ON/OFF button on the power supply unit. The cleaner will begin its cleaning cycle automatically.
The Pulit Advance +5 operates in cycles of 1.5 to 2 hours, utilizing its Aquasmart electronic control system to efficiently clean the pool floor, walls, and waterline. The effective vibrating cleaning brush dislodges dirt from all surfaces.
Adjustable Suction Nozzles
The cleaner features height-adjustable suction nozzles to ensure perfect adaptation to any pool type, optimizing cleaning performance.
Mantenimiento
Cleaning Filter Cartridges
The Pulit Advance +5 features top-access filter cartridges, making them easy to clean without direct contact with dirt. A LED indicator on the power supply unit will illuminate when the filter needs cleaning.
- Desconecte la fuente de alimentación de la toma eléctrica.
- Retire el limpiador de la piscina.
- Open the top access cover of the cleaner.
- Remove the filter cartridges.
- Rinse the cartridges thoroughly with a garden hose until all debris is removed.
- Reinsert the clean filter cartridges and close the top access cover.
Image: The AstralPool Pulit Advance +5 with its top filter compartments open, demonstrating the easy access for cleaning the filter cartridges.
Mantenimiento del cepillo
Periodically inspect the PVA brushes for wear and tear. Replace them if they show significant damage to ensure optimal cleaning performance.
Imagen: Una parte inferior view of the AstralPool Pulit Advance +5, clearly showing its PVA brushes and traction system, essential for effective pool cleaning.
Gestión de cables
After each use, carefully coil the self-floating cable to prevent tangling and damage. Store the cleaner and cable in a dry, shaded area.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| El limpiador no arranca | No power to unit; Cable not properly connected; Power supply unit malfunction. | Check power outlet; Ensure all cable connections are secure; Contact customer support if power supply unit is faulty. |
| Pobre rendimiento de limpieza | Clogged filter cartridges; Worn brushes; Obstruction in suction nozzles. | Clean filter cartridges; Inspect and replace brushes if necessary; Check and clear suction nozzles. |
| El limpiador no trepa por las paredes | Clogged filter; Air trapped in cleaner; Water chemistry imbalance (e.g., high calcium). | Clean filter; Tilt cleaner to release air bubbles; Check pool water chemistry. |
| Cable tangles | Improper cable deployment; Excessive cable length in pool. | Ensure cable is fully extended and untangled before placing cleaner; Only use necessary cable length. |
Presupuesto
| Característica | Detalle |
|---|---|
| Número de modelo | Pulit Advance +5 |
| Área de limpieza | Pool floor, walls, and waterline |
| Tiempo del ciclo de limpieza | 1.5 - 2 horas |
| Longitud del cable | 18 meters (self-floating) |
| Tipo de filtro | Top-access filter cartridges (standard, fine, coarse) |
| Pinceles | PVA brushes |
| Sistema de control | Aquasmart electronic control |
| Dimensiones (L x An x Al) | 0.16 x 0.16 x 0.14 cm (Product only, not shipping dimensions) |
| Peso | 500 grams (Product only, not shipping weight) |
| Material | Plástico |
Información de garantía
Specific warranty terms and conditions for the AstralPool Pulit Advance +5 Robotic Pool Cleaner are typically provided at the point of purchase or within separate documentation included with the product. Please refer to your purchase receipt and the warranty card for details regarding coverage period, what is covered, and how to make a claim.
Note: The product description mentions "Information indisponible sur les pièces détachées" (Information unavailable on spare parts). This suggests that spare parts availability might not be guaranteed or easily accessible.
Atención al cliente
For technical assistance, spare parts, or warranty claims, please contact your authorized AstralPool dealer or visit the official AstralPool websitio para obtener información de contacto de soporte.
It is recommended to have your product model number (Pulit Advance +5) and purchase date available when contacting support.
