Manual de instrucciones del soporte de pared para TV de movimiento completo CJ Tech F00524

1. Introducción

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your CJ Tech F00524 Full Motion TV Wall Mount. Please read this manual thoroughly before installation to ensure correct setup and to prevent damage to the product or injury to yourself.

The CJ Tech F00524 is designed to securely mount flat panel televisions ranging from 32 to 65 inches, supporting a maximum weight of 60 kg (132 lbs). It offers full motion capabilities, including swivel and tilt, to optimize your viewExperiencia de aprendizaje.

2. Información de seguridad

WARNING: Failure to read and follow all instructions may result in personal injury, property damage, or voiding of your warranty.

• Do not begin installation until you have read and understood all instructions and warnings contained in this manual. If you have any questions, contact customer support.
• The wall mount must be installed by qualified personnel. Improper installation can cause serious injury.
• Ensure the mounting surface can safely support the combined weight of the mount and the television. The wall must be capable of supporting at least four times the weight of the TV and mount.
• No exceda la capacidad máxima de peso de 60 kg (132 lbs).
• Use only the mounting hardware provided. Do not use the mount for any purpose not expressly specified by the manufacturer.
• Always check for electrical wires, water pipes, and gas lines in the wall before drilling.
• Este producto contiene elementos pequeños que podrían provocar asfixia si se ingieren. Manténgalos fuera del alcance de los niños.

3. Contenido del paquete

Verifique que todos los componentes estén presentes y sin daños antes de la instalación. Si alguna pieza falta o está defectuosa, no continúe con la instalación y contacte con atención al cliente.

• Conjunto de placa de pared
• Brazos de soporte para TV (2)
• Kit de hardware de montaje (tornillos, anclajes, arandelas, espaciadores)
• Manual de usuario

Imagen 1: Másview of the CJ Tech F00524 Full Motion TV Wall Mount components. This image displays the main wall plate assembly and the two TV bracket arms, along with some of the included mounting hardware.

4. Configuración e instalación

Tools Required (not included): Pencil, Stud Finder, Drill, Drill Bits, Level, Phillips Head Screwdriver, Socket Wrench.

Paso 4.1: elija la ubicación de montaje

• Determine la altura y posición deseada para su televisor.
• Use a stud finder to locate the center of two adjacent wooden studs in the wall. Mark these locations. For concrete or brick walls, ensure the wall is solid and use appropriate anchors (not always included, consult a professional).

Paso 4.2: fije la placa de pared a la pared

• Position the wall plate assembly against the wall at your marked locations. Use a level to ensure it is perfectly horizontal.
• Marque los puntos de perforación a través de los agujeros en la placa de pared.
• Drill pilot holes at the marked locations. The drill bit size will depend on your wall type and the provided lag bolts/anchors.
• Fije la placa de pared a la pared con los tirafondos y las arandelas incluidos. Apriétela firmemente, pero sin sobreapretarla.

Paso 4.3: coloque los soportes de TV en el televisor

• Coloque con cuidado el televisor boca abajo sobre una superficie suave y limpia para evitar dañar la pantalla.
• Identifique los orificios de montaje VESA en la parte posterior de su televisor.
• Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV's VESA pattern. The mount accommodates VESA patterns up to 600x400 mm.
• Attach the two TV bracket arms to the back of your TV. Ensure the hooks on the bracket arms are facing upwards and the arms are centered and level. Do not overtighten the screws.

Paso 4.4: Monte el televisor en la placa de pared

• Con ayuda, levante con cuidado el televisor con los soportes adjuntos.
• Hook the TV bracket arms onto the wall plate. Ensure both arms are securely seated on the wall plate.
• Locate the safety screws or locking mechanisms on the bottom of the TV bracket arms. Tighten these to secure the TV to the wall plate and prevent accidental dislodgement.

Imagen 2: Un example of the CJ Tech F00524 Full Motion TV Wall Mount installed with a television. This image demonstrates the mount's low-profile design and how it appears when a TV is attached to the wall.

5. Operación del soporte

The CJ Tech F00524 Full Motion TV Wall Mount allows for flexible viewángulos de ing.

• Girar: El soporte puede girar hasta 180 grados horizontalmente (90 grados a la izquierda y 90 grados a la derecha, según el tamaño del televisor y la distancia a la pared). Empuje o tire suavemente del televisor hasta alcanzar el ángulo deseado.
• Inclinación: The mount allows for a tilt range from -15 degrees to +15 degrees. Loosen the tilt adjustment knobs on the TV bracket arms, adjust the TV to the desired vertical angle, and then retighten the knobs to secure the position.

Always adjust the TV slowly and carefully. Avoid sudden movements or excessive force.

6. Mantenimiento

• Limpieza: Limpie el soporte con un paño suave y seco. No utilice limpiadores abrasivos ni disolventes.
• Controles periódicos: Periodically inspect the mount and all connection points to ensure they remain secure. Retighten any loose screws or bolts.
• Lubricación: The moving parts of the mount are designed for smooth operation and generally do not require lubrication. If movement becomes stiff, consult customer support.

7. Solución de problemas

• El televisor no está nivelado: Ensure the wall plate is level before securing it to the wall. Some mounts have fine-tuning level adjustments on the TV brackets; consult the specific design of your mount. If not, you may need to slightly adjust the wall plate.
• Dificultad para ajustar la inclinación/giro: Check if any adjustment knobs or screws are overtightened. Loosen them slightly to allow movement, then retighten once the desired position is achieved. Ensure no cables are obstructing movement.
• El monte se siente inestable: Immediately remove the TV from the mount. Recheck all installation steps, especially the wall attachment and TV bracket attachment. Ensure all bolts are securely tightened and the wall structure is adequate. Do not remount the TV until stability is confirmed.

8. Especificaciones

9. Información de garantía

CJ Tech products are manufactured to high-quality standards. This product is covered by a limited warranty against defects in materials and workmanship. Specific warranty terms and duration may vary by region and retailer. Please retain your proof of purchase for warranty claims.

For detailed warranty information, please refer to the warranty card included with your product or contact CJ Tech customer support.

10. Soporte

If you encounter any issues during installation or operation, or if you have questions regarding your CJ Tech F00524 Full Motion TV Wall Mount, please contact CJ Tech customer support. Support contact information can typically be found on the product packaging, the official CJ Tech websitio, o a través de su minorista.

When contacting support, please have your product model number (F00524) and proof of purchase ready.