Introducción
This manual provides essential instructions for the Generac 0J93230SSM Maintenance Kit, designed to facilitate routine upkeep for Generac 20kW to 22kW generators. Regular maintenance using genuine Generac parts is crucial for ensuring the longevity and reliable performance of your generator. This kit includes all necessary components for a standard service interval.
The kit contains genuine OEM Generac parts, specifically chosen to fit Generac engine models requiring this part number.
Componentes del kit terminadosview
The Generac 0J93230SSM Maintenance Kit includes the following items:
- Two (2) Quarts of SAE 5W-30 Full Synthetic Engine Oil
- One (1) Air Filter
- One (1) Oil Filter (Part #: 070185E)
- Two (2) Spark Plugs
- One (1) Service Sticker
Procedimientos de mantenimiento
Regular maintenance is vital for the optimal performance and longevity of your Generac generator. Always refer to your generator's specific owner's manual for detailed safety precautions and procedures.
1. Cambio de aceite del motor
The kit includes two quarts of SAE 5W-30 full synthetic engine oil. This oil is formulated for optimal performance in various temperatures.
- Asegúrese de que el generador esté apagado y enfriado.
- Locate the oil drain plug and place a suitable container underneath to collect used oil.
- Remove the drain plug and the oil fill cap/dipstick. Allow all old oil to drain completely.
- Vuelva a colocar el tapón de drenaje de forma segura.
- Carefully pour the new SAE 5W-30 synthetic engine oil into the oil fill opening. Refer to your generator's manual for the exact oil capacity.
- Check the oil level with the dipstick, ensuring it is within the recommended range.
- Vuelva a colocar la tapa de llenado/varilla de nivel de aceite.
2. Oil Filter Replacement
The kit includes one Generac oil filter (Part #: 070185E).
- After draining the old engine oil, locate the oil filter.
- Use an oil filter wrench to loosen and remove the old oil filter. Be prepared for some oil spillage.
- Aplique una película fina de aceite de motor nuevo a la junta de goma del nuevo filtro de aceite.
- Screw on the new oil filter by hand until the gasket makes contact with the engine block. Then, tighten an additional 1/2 to 3/4 turn. Do not overtighten.
- After refilling the engine oil, run the generator for a few minutes and check for leaks around the oil filter.
3. Reemplazo del filtro de aire
The kit includes one air filter. A clean air filter ensures proper engine breathing and prevents contaminants from entering the engine.
- Localice la carcasa del filtro de aire en su generador.
- Open the housing by releasing los clips o tornillos.
- Remove the old air filter. Note its orientation.
- Limpie cualquier residuo del interior de la carcasa del filtro de aire.
- Insert the new air filter, ensuring it is seated correctly.
- Cierre y asegure la carcasa del filtro de aire.
4. Reemplazo de bujías
The kit includes two spark plugs. Replacing spark plugs ensures efficient ignition and optimal engine performance.
- Ensure the generator is off and cooled. Disconnect the spark plug wires.
- Use a spark plug wrench to carefully remove the old spark plugs.
- Inspect the new spark plugs for correct gap (refer to your generator's manual for specifications). Adjust if necessary.
- Enrosque las bujías nuevas en la culata con la mano para evitar que se enrosquen mal.
- Tighten with a spark plug wrench. Do not overtighten; typically, a quarter to half turn after hand-tight is sufficient.
- Vuelva a conectar firmemente los cables de las bujías.
5. Service Sticker
Use the included service sticker to record the date and hours of this maintenance service. This helps track future maintenance intervals.
Vídeos de productos
Presupuesto
| Característica | Detalle |
|---|---|
| Marca | Generac |
| Nombre del modelo | 0J93230SSM |
| Recomendado para | Generac 20kW-22kW Generators |
| Componentes incluidos | 2 Quarts of 5W-30 Synthetic Motor Oil, 1 Air Filter, 1 Oil Filter, 2 Spark Plugs, 1 Service Sticker |
| Peso del artículo | 2.76 libras (aprox.) |
| Dimensiones del producto | 27.94 x 27.94 x 27.94 pulgadas (dimensiones aproximadas del paquete) |
| Material | Plastic (for some components) |
| Característica especial | Maintenance kit, Tune up kit |
Garantía y soporte
For specific warranty information regarding the Generac 0J93230SSM Maintenance Kit or its individual components, please refer to the documentation included with your purchase or visit the official Generac websitio.
For technical support, troubleshooting assistance, or to locate authorized service centers, please contact Generac customer service directly or consult your generator's owner's manual.
