Introducción
This manual provides essential instructions for the safe and efficient installation, operation, and maintenance of your Zoeller Shark Model 807-0001 Residential Grinder Pump. Please read this manual thoroughly before attempting to install or operate the pump. Retain this manual for future reference.
The Zoeller Shark Model 807-0001 is a 1 HP, 115V residential grinder pump designed for handling wastewater and effluent in residential applications. It features a robust grinding mechanism to reduce solids into a fine slurry, allowing for discharge through small diameter piping.
Información de seguridad
WARNING: Risk of electric shock. This pump is supplied with a grounding conductor and grounding-type attachment plug. To reduce the risk of electric shock, be certain that it is connected only to a properly grounded, grounding-type receptacle.
- Desconecte siempre la alimentación de la bomba antes de manipularla o realizarle mantenimiento.
- Asegúrese de que todas las conexiones eléctricas sean realizadas por un electricista calificado y cumplan con los códigos locales.
- No opere la bomba en una atmósfera explosiva.
- Utilice equipo de protección personal (EPP) adecuado durante la instalación y el mantenimiento.
- Este producto contiene sustancias químicas que el estado de California reconoce como causantes de cáncer, defectos congénitos u otros daños reproductivos. (Advertencia de la Proposición 65)
Configuración e instalación
Proper installation is crucial for the longevity and performance of your grinder pump. Consult a qualified professional for installation if you are unsure.
Desembalaje e inspección
Retire con cuidado la bomba de su embalaje. Inspeccione si hay algún daño visible que pueda haberse producido durante el envío. Informe inmediatamente a su proveedor sobre cualquier daño.
Figure 1: Zoeller Shark Model 807-0001 Residential Grinder Pump. This image shows the complete pump unit with its float switch mechanism.
Location and Sump Requirements
- The pump must be installed in a properly sized and vented sump or basin.
- Ensure the sump is free of debris before placing the pump.
- The pump should be placed on a solid, level surface at the bottom of the sump.
Conexiones de tuberías
- Connect the discharge piping to the pump's outlet. Ensure all connections are watertight.
- Install a check valve in the discharge line to prevent backflow.
- A shut-off valve is recommended for ease of maintenance.
Conexiones eléctricas
- The pump requires a 115V, 60 Hz, single-phase power supply.
- Connect the pump to a dedicated, properly grounded circuit with appropriate overcurrent protection.
- Ensure the float switch is installed and adjusted correctly to control pump cycles.
Instrucciones de funcionamiento
Once installed and connected, the Zoeller Shark Model 807-0001 operates automatically via its float switch.
Puesta en marcha inicial
- Ensure all piping and electrical connections are secure.
- Slowly fill the sump with water to activate the float switch.
- Observe the pump for proper operation: it should turn on, pump down the water, and then turn off.
- Check for any leaks in the discharge piping.
Funcionamiento normal
The pump will activate when the water level rises to the "on" level set by the float switch and will continue to run until the water level drops to the "off" level. The grinding mechanism processes solids before pumping.
Figura 2: Primer plano view of the Zoeller Shark Grinder Pump's impeller and grinding plate. This mechanism is responsible for reducing solids in wastewater.
Mantenimiento
Regular maintenance helps ensure reliable operation and extends the life of your pump.
Routine Checks (Monthly)
- Inspección visual: Check the pump and sump for any unusual debris, blockages, or signs of wear.
- Interruptor de flotador: Levante y baje manualmente el interruptor de flotador para asegurarse de que se mueva libremente y active la bomba correctamente.
- Línea de descarga: Listen for any unusual noises or signs of obstruction in the discharge line.
Annual Inspection (Professional Recommended)
- Inspect the grinding mechanism for wear.
- Check motor windings and electrical connections.
- Limpiar el cárter basin minuciosamente.
PRECAUCIÓN: Desconecte siempre la alimentación antes de realizar cualquier mantenimiento o inspección.
Solución de problemas
Esta sección ofrece soluciones a problemas comunes. Si tiene problemas que no aparecen en la lista, contacte con atención al cliente.
| Problema | Posible causa | Solución |
|---|---|---|
| La bomba no funciona | No power; tripped breaker; faulty float switch; motor overload. | Check power supply and breaker. Inspect float switch for obstruction. Reset thermal overload if present. |
| La bomba funciona continuamente | Stuck float switch; check valve failure; discharge line blockage. | Clear float switch. Inspect/replace check valve. Clear discharge line. |
| La bomba funciona pero no descarga agua | Air lock; clogged impeller/grinder; discharge line blockage. | Vent air from pump. Clear impeller/grinder. Clear discharge line. |
| Ruido o vibración excesivos | Escombros en la bomba; cojinetes desgastados; instalación incorrecta. | Disconnect power and inspect for debris. Contact service professional for worn parts. |
Presupuesto
| Característica | Detalle |
|---|---|
| Número de modelo | 807-0001 |
| Marca | Zoeller |
| Caballo de fuerza | 1 CV |
| Volumentage | 115 voltios |
| Fuente de poder | AC/DC |
| Caudal máximo | 45 galones por minuto |
| Peso del artículo | 65 libras |
| Dimensiones del producto | 17.25" de largo x 8.91" de ancho x 17.25" de alto |
| Material | Acero inoxidable |
Información de garantía
Zoeller Company products are warranted against defects in material and workmanship for a period specified by the manufacturer from the date of purchase. Specific warranty terms and conditions may vary. Please refer to the official Zoeller Company warranty statement provided with your product or visit the manufacturer's websitio para obtener información detallada.
Note: Improper installation, unauthorized repairs, or misuse of the product may void the warranty.
Atención al cliente
For technical assistance, replacement parts, or warranty claims, please contact Zoeller Customer Support.
- Fabricante: Zoeller Company
- Websitio: www.zoellerpumps.com
- Información del contacto: Consulte el sitio web oficial de Zoeller webSitio o embalaje del producto para obtener información de contacto actualizada.
