1. Introducción
This manual provides essential information for the safe and efficient use of the ABB Indicator Light with Green Diffuser, model 2CSK1313CH. Please read this manual thoroughly before installation and operation to ensure proper functionality and to prevent damage or injury.
2. Información de seguridad
ADVERTENCIA:
- La instalación debe ser realizada por un electricista calificado de acuerdo con todos los códigos eléctricos locales y nacionales.
- Ensure power is disconnected at the main circuit breaker before installation, maintenance, or troubleshooting.
- No opere el dispositivo si está dañado.
- This product is designed for specific electrical applications. Do not use it for purposes other than its intended use.
3. Producto terminadoview
The ABB Indicator Light with Green Diffuser (Model 2CSK1313CH) is a signaling device designed for various electrical panels and control systems. It provides visual indication of system status, power presence, or operational states.
Figura 3.1: Frente view of the ABB Indicator Light with Green Diffuser. The image shows a rectangular white module with a prominent circular green light diffuser in the center.
Componentes incluidos:
- 1 x ABB Indicator Light with Green Diffuser (Model 2CSK1313CH)
4. Configuración e instalación
Siga estos pasos para una correcta instalación:
- Desconexión de energía: Before beginning any installation, ensure that the main power supply to the circuit where the indicator light will be installed is completely disconnected. Verify with a voltage probador.
- Montaje: The indicator light is designed for panel mounting. Insert the device into the designated opening in the control panel. Ensure it is securely fastened according to the panel's specifications.
- Alambrado: Connect the electrical wires to the terminals of the indicator light. Refer to the wiring diagram provided with your specific electrical panel or system for correct polarity and voltage requirements. Ensure all connections are tight and secure.
- Verificación: Verifique nuevamente todas las conexiones para asegurarse de que sean correctas y seguras.
- Restauración de energía: Una vez completada y verificada la instalación, restablezca la energía al circuito.
Note: This device does not require batteries for operation.
5. Instrucciones de funcionamiento
The ABB Indicator Light with Green Diffuser operates as a visual signal. Once properly installed and connected to a power source, the green diffuser will illuminate when power is supplied to its terminals, indicating the status it is wired to monitor (e.g., power ON, system active, etc.).
- Función: Provides a clear visual indication (green light) when activated.
- Activación: The light illuminates when the specified voltage is applied to its input terminals.
- Desactivación: The light turns off when the voltage se elimina.
6. Mantenimiento
The ABB Indicator Light is designed for minimal maintenance. Regular inspection is recommended to ensure continued reliable operation.
- Limpieza: If the diffuser or housing becomes dirty, gently wipe it with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Inspección: Periodically check for any signs of physical damage, loose connections, or discoloration. If any issues are observed, disconnect power and address them immediately.
- Lamp Reemplazo: This unit typically uses an integrated LED or long-life lamp. If the light fails to illuminate, it may indicate a fault with the unit itself or the power supply. Replacement of internal components is generally not user-serviceable.
7. Solución de problemas
If the indicator light is not functioning as expected, refer to the following common issues and solutions:
| Problema | Posible causa | Solución |
|---|---|---|
| La luz no ilumina. | No hay suministro de energía a la unidad. | Check the circuit breaker and wiring connections. Ensure power is supplied to the correct terminals. |
| La luz parpadea o es tenue. | Fuente de alimentación inestable o conexión suelta. | Verify power supply stability. Tighten all wiring connections. |
| Daño físico a la unidad. | Impacto o manejo inadecuado. | Replace the damaged unit. Do not attempt to repair. |
If the problem persists after attempting these solutions, contact qualified personnel or ABB customer support.
8. Especificaciones
| Atributo | Valor |
|---|---|
| Marca | TEJIDO |
| Número de modelo | 2CSK1313CH |
| Dimensiones del producto | 5.1 x 10.6 x 8.6 cm |
| Peso del artículo | 150 gramos |
| Color | White (with Green Diffuser) |
| Pilas necesarias | No |
| GTIN (EAN) | 8012542006152 |
9. Información de garantía
For warranty details, please refer to the official ABB webSitio web o contacte con su distribuidor local de ABB. Conserve el recibo de compra como comprobante.
10. Atención al cliente
For technical assistance, product inquiries, or service, please visit the official ABB website or contact their customer support line. Contact information can typically be found on the ABB corporate websitio o en el embalaje del producto.
This manual is subject to change without notice. The latest version can be found on the manufacturer's websitio.
