Introducción
This manual provides detailed instructions for the installation, operation, and maintenance of your Gladen RS-X-12 High Performance 12" Subwoofer. Please read this manual thoroughly before use to ensure optimal performance and longevity of your product. Proper installation and care are crucial for the best audio experience and to prevent damage.
Imagen: Frente view of the Gladen RS-X-12 High Performance 12 inch Subwoofer, showcasing its black cone, red stitching, and robust construction.
Características del producto
The Gladen RS-X-12 Subwoofer is engineered for high-performance audio reproduction, featuring robust components designed for durability and sound quality.
- Vented Die-Cast Basket: Provides structural rigidity and aids in cooling the voice coil.
- Black Nomex Spider: Ensures precise cone control and durability under high excursion.
- Paper Cone: Offers an optimal balance of stiffness and low mass for accurate sound reproduction.
- PP-Dust Cap: Protects the voice coil assembly from dust and debris.
- 12" (30 cm) Diameter: Standard size for powerful bass output.
- 750/500 Watt Power Handling: Capable of handling significant power for dynamic bass.
- Impedancia de 4 ohmios: Compatible con una amplia gama de sistemas de audio para automóvil. ampsalvavidas.
- 2.5" Voice Coil: Designed for high power handling and thermal stability.
- Formador de bobina: Constructed from Aluminum for efficient heat dissipation.
- Rodear: Made of durable Foam for optimal cone movement.
Configuración e instalación
Proper installation is critical for the performance and longevity of your subwoofer. Consult a professional installer if you are unsure about any steps.
Dimensiones físicas
- Diámetro externo: 317 mm / 12.48 pulgadas
- Installation Diameter: 284 mm / 11.18 pulgadas
- Profundidad de instalación: 148 mm / 5.82 pulgadas
- Diámetro del imán: 185 mm / 7.28 pulgadas
Recommended Enclosure Volumes
For optimal performance, the RS-X-12 subwoofer is designed to operate within specific enclosure volumes:
- Caja ventilada: 48 liters (approximately 1.7 cubic feet)
- Caja sellada: 32 liters (approximately 1.1 cubic feet)
Ensure the enclosure is constructed from sturdy material and is airtight (for sealed boxes) or properly ported (for vented boxes) according to design specifications.
Alambrado
Conecte el subwoofer a su amplifier using appropriate gauge speaker wire. Ensure correct polarity (+ to + and - to -) to prevent phase issues and ensure proper sound reproduction. Refer to your amplifier's manual for specific wiring configurations and impedance matching.
Image: Technical diagram showing the Gladen RS-X-12 subwoofer's dimensions, detailed speaker specifications, and recommended sealed and vented box volumes.
Instrucciones de funcionamiento
Una vez instalado, siga estas pautas para un funcionamiento óptimo:
- Período de rodaje: Deje un periodo de adaptación de aproximadamente 10 a 20 horas de escucha moderada antes de utilizar el subwoofer a un volumen alto. Esto permite que los componentes de la suspensión se aflojen y funcionen de forma óptima.
- Ajuste de ganancia: Establecer el amplifier gain correctly to match the output of your head unit. Incorrect gain settings can lead to distortion and potential damage to the subwoofer. Avoid setting the gain too high.
- Configuración de cruce: Utilice el filtro de paso bajo en su amplifier or head unit to send only low frequencies to the subwoofer. A typical crossover point for a 12-inch subwoofer is between 60 Hz and 100 Hz.
- Control de volumen: Always increase volume gradually. If you hear any distortion, reduce the volume immediately.
- Manejo de potencia: While the subwoofer has a high power rating, continuous operation at maximum power can lead to overheating. Monitor for signs of stress or excessive heat.
Mantenimiento
El mantenimiento regular ayuda a garantizar la longevidad y el rendimiento de su subwoofer.
- Limpieza: Use a soft, dry cloth to gently wipe down the cone and surround. Avoid using harsh chemicals or excessive moisture.
- Inspección: Periodically check the speaker terminals for secure connections and inspect the cone and surround for any signs of damage or wear.
- Ambiente: Ensure the subwoofer is installed in a location free from excessive moisture, direct sunlight, and extreme temperatures.
- Ventilación: If installed in an enclosure, ensure adequate ventilation around the amplificador para evitar el sobrecalentamiento.
Solución de problemas
Si tiene problemas con su subwoofer, consulte los siguientes problemas y soluciones comunes:
| Problema | Posible causa | Solución |
|---|---|---|
| Sin sonido | Sin poder para ampificador; cableado suelto; ampLificador en modo de protección; señal de entrada incorrecta. | Controlar amplifier power, fuses, and ground connections. Verify all speaker and RCA cables are securely connected. Reset amplifier if in protect mode. Ensure head unit is sending an audio signal. |
| Sonido distorsionado | AmpGanancia del amplificador demasiado alta; configuración de crossover incorrecta; subwoofer dañado. | Reducir amplifier gain. Adjust crossover frequency. Inspect subwoofer cone and surround for physical damage. |
| Bajo débil | Incorrect phase; insufficient power; improper enclosure. | Check subwoofer phase setting (0 or 180 degrees). Ensure amplifier is providing adequate power. Verify enclosure volume and construction. |
| Calentamiento excesivo | Amplifier gain too high; inadequate ventilation; continuous high power usage. | Reducir ampGanancia del limitador. Asegurarse amplifier has proper airflow. Avoid prolonged operation at maximum volume. |
Presupuesto
Detailed technical specifications for the Gladen RS-X-12 Subwoofer:
| Especificación | Valor |
|---|---|
| Nombre del modelo | RS-X-12 |
| Tipo de altavoz | Subwoofer, Surround Sound |
| Diámetro del subwoofer | 12 pulgadas (30 cm) |
| Power (RMS/Max) | 500W / 750W (valor eficaz) |
| Potencia máxima de salida del altavoz | 1500 vatios (pico) |
| Impedancia nominal | 4 ohmios |
| Resistencia DC (Re) | 3.71 ohmios |
| Frecuencia de resonancia (Fs) | 31.40 Hz |
| Diámetro de la bobina móvil | 2.5 pulgadas |
| xmax | 14 milímetros |
| Masa en movimiento (mm) | 149.97 gramos |
| Área efectiva del pistón (Sd) | 514 cm² |
| Mechanical Resistance (Rms) | 6.54 kilogramos / s |
| Cumplimiento (Cms) | 0.17 mm / N |
| Factor de fuerza (BL) | 14.37 |
| Equivalent Air Volume (Vas) | 63.57 dm³ |
| Dimensiones del producto | 14" de profundidad x 9" de ancho x 14" de alto |
| Peso del artículo | 18 libras |
| Tipo de montaje | Montaje empotrado |
| es resistente al agua | FALSO |
| Componentes incluidos | RS-X-12 Subwoofer |
Garantía y soporte
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Gladen webSitio. Conserve su comprobante de compra para cualquier reclamación de garantía.
Fabricante: Gladen
For further assistance, you may contact Gladen customer service through their official channels.
