Introducción
Thank you for choosing KICKER PS5250 Motorcycle Speakers. These 5.25-inch coaxial speakers are specifically designed for Harley-Davidson motorcycles, offering a durable, waterproof solution for high-quality audio on the road. This manual provides essential information for installation, operation, and maintenance to ensure optimal performance and longevity of your speakers.
Información de seguridad
- Instalación profesional recomendada: For best results and to avoid damage, professional installation is highly recommended.
- Manejo de potencia: Do not exceed the maximum power handling of 100 Watts to prevent speaker damage.
- Alambrado: Ensure all wiring is correctly connected according to the impedance (2 Ohm) and polarity to prevent damage to the speakers or ampmás duradero.
- Clasificación de impermeabilidad: While these speakers are waterproof, avoid submerging them or exposing them to high-pressure water jets.
- Temperatura de funcionamiento: Avoid operating the speakers in extreme temperatures outside of typical motorcycle operating conditions.
Contenido del paquete
Verifique que todos los artículos estén presentes en su paquete:
- KICKER 10PS5250 5.25-inch Coaxial Speakers (Pair)
- Specific replacement grilles for Harley-Davidson’s “Bat-wing” fairing
- Weather-proof materials
Image: The KICKER 10PS5250 speakers shown with their included grilles, ready for installation.
Guía de instalación
Herramientas necesarias
- Juego de destornilladores (Phillips y de cabeza plana)
- Pelacables/engarzadores
- Socket wrench set (if fairing removal is needed)
- Cinta aisladora o tubo termorretráctil
- Multimeter (optional, for checking polarity)
Instrucciones de montaje
- Prepare la motocicleta: Ensure the motorcycle is turned off and the battery is disconnected before beginning any electrical work.
- Quitar los altavoces existentes: Carefully remove the existing speakers from your Harley-Davidson’s fairing. This may involve removing the fairing itself, depending on your motorcycle model.
- Install New Speakers: Place the KICKER PS5250 speakers into the speaker openings. These speakers are designed to fit Harley-Davidson’s “Bat-wing” fairing. Ensure the speaker is seated correctly and securely.
- Secure with Grilles: Attach the provided specific replacement grilles over the speakers. Use the appropriate screws to secure the grilles and speakers to the fairing. Do not overtighten.
Imagen: Frente en ángulo view of the KICKER 10PS5250 speaker, highlighting its design for fairing installation.
Diagrama de cableado
The KICKER PS5250 speakers have a 2 Ohm impedance. Connect the speaker wires from your amplifier or head unit to the corresponding terminals on the speaker. Ensure correct polarity (positive to positive, negative to negative) to avoid phase issues and ensure optimal sound quality.
- Terminal positivo (+): Typically marked with a red indicator or a plus sign.
- Terminal negativo (-): Typically marked with a black indicator or a minus sign.
Imagen: Trasera view of the KICKER 10PS5250 speaker, showing the wiring terminals for connection to an audio system.
Operación
Once installed and wired correctly, your KICKER PS5250 speakers will operate as part of your motorcycle's audio system. Ensure your audio source (head unit, amplifier) is compatible with 2 Ohm speakers.
- Encendido: Encienda el encendido y el sistema de audio de su motocicleta.
- Control de volumen: Adjust the volume from your head unit. Start at a low volume and gradually increase to a comfortable listening level.
- Configuración de audio: Utilize your head unit's equalizer or tone controls to fine-tune the sound to your preference. Avoid excessive bass or treble boost at high volumes to prevent distortion or damage.
Cuidado y mantenimiento
- Limpieza: Clean the speaker grilles and surrounding areas with a soft, damp paño. Evite el uso de productos químicos agresivos o limpiadores abrasivos.
- Exposición al agua: While waterproof, it is advisable to wipe down the speakers after heavy rain or washing to prevent water spots and maintain appearance.
- Inspección: Periodically check the speaker mounting screws and wiring connections to ensure they remain secure.
- Almacenamiento: If storing the motorcycle for an extended period, ensure the speakers are clean and dry.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| No hay sonido de los altavoces | Cableado suelto o incorrecto; Amplifier/head unit off or faulty; Speaker damaged | Check all wiring connections for security and correct polarity. Ensure ampEl amplificador/unidad principal está encendido y funcionando. Pruebe con otro altavoz en buen estado si es posible. |
| Sonido distorsionado | Volumen demasiado alto; Amplifier clipping; Incorrect audio settings; Damaged speaker | Reducir el volumen. Comprobar amplifier gain settings. Adjust equalizer/tone controls. Inspect speaker cone for physical damage. |
| Sonido intermitente | Loose wiring connection; Faulty speaker wire | Inspeccione todo el cableado para detectar conexiones sueltas o cables desgastados. Reemplace el cable del altavoz si está dañado. |
| Un altavoz no funciona | Wiring issue to that speaker; Speaker damaged | Check wiring specific to the non-working speaker. Swap speakers (if possible) to determine if the issue is with the speaker or the wiring/source. |
Especificaciones técnicas
| Característica | Especificación |
|---|---|
| Nombre del modelo | PS5250 |
| Tipo de altavoz | Coaxial |
| Característica especial | Impermeable |
| Usos recomendados del producto | Exterior |
| Recuento de unidades | 1.0 Conteo (por altavoz) |
| Configuración de canales de sonido envolvente | 2.0 |
| Peso del artículo | 12 onzas |
| Impedancia | 2 ohmios |
| es resistente al agua | VERDADERO |
| Número de artículos | 1 (per speaker) |
| Tamaño del altavoz | 5.25 pulgadas |
| Fuente de poder | Eléctrico con cable |
| Diámetro del woofer | 5.25 pulgadas |
| Diámetro del tweeter | 20 milímetros |
| Tipo de servicio del vehículo | Motocicleta |
| Nivel de resistencia al agua | Impermeable |
| Tipo de controlador de audio | Controlador dinámico |
| Tamaño del controlador de audio | 5.25 pulgadas |
| Protocolo de conectividad | Coaxial |
| Fabricante | Pateador |
| Dimensiones del producto | 15 x 7 x 11 pulgadas |
| Potencia máxima de salida del altavoz | 100 vatios |
| Tecnología de conectividad | Coaxial |
| Modo de salida de audio | Estéreo |
| Tipo de montaje | Soporte para motocicleta |
Garantía y atención al cliente
KICKER products are designed for durability and performance. These speakers come with a Limited Warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including coverage duration and what is covered.
For technical support, troubleshooting assistance, or warranty claims, please contact KICKER customer support directly. You can find contact information on the official KICKER websitio o a través de su distribuidor autorizado.
Oficial de KICKER Websitio: www.kicker.com
