JOCCA 6285U UV Lamp Manual de instrucciones

1. Producto terminadoview

The JOCCA 6285U UV Lamp is a specialized device designed for curing nail polish and gel, suitable for both manicures and pedicures. It features four UV bulbs to ensure quick and even drying, providing professional results at home.

This image shows the JOCCA 6285U UV Lamp, a white, compact device designed for curing nail polish and gel. It features an opening for hands or feet and houses four UV bulbs.

2. Instrucciones de seguridad importantes

Lea y comprenda todas las instrucciones de seguridad antes de usar este aparato. No seguirlas podría provocar una descarga eléctrica, un incendio o lesiones graves.

• Lee todas las instrucciones: Familiarícese con el funcionamiento y las características de seguridad antes del primer uso.
• Seguridad eléctrica: No opere el lamp with a damaged cord or plug. Keep the power cord away from heated surfaces. Do not immerse the lamp en agua u otros líquidos.
• Exposición a la luz ultravioleta: Avoid direct eye exposure to the UV light. Prolonged exposure to UV light can be harmful to skin and eyes. Use in a well-ventilated area.
• Niños y mascotas: Keep the appliance out of reach of children and pets. This is not a toy.
• Almacenamiento: Desconecte el lamp when not in use and store it in a dry, safe place.
• Mantenimiento: No intente realizar el mantenimiento ni reparar la unidad usted mismo. Encargue cualquier servicio técnico a personal cualificado.

3. Contenido del paquete

Verifique que todos los artículos estén presentes en el paquete:

• 1 x JOCCA 6285U UV Lamp Unidad
• 4 x UV Bulbs
• 1 x Manual de instrucciones (este documento)

4. Configuración

Follow these steps to set up your UV lamp:

1. Deshacer: Retire con cuidado el UV lamp y todos los componentes del embalaje.
2. Insertar bombillas: Locate the bulb sockets inside the lamp. Gently insert each of the 4 UV bulbs into its designated socket. Ensure they are securely seated and properly aligned.
3. Colocación: Coloque la lamp on a stable, flat, and dry surface, away from water sources.
4. Conecte la electricidad: Conecte el cable de alimentación a la lamp's power input, then connect the other end to a suitable electrical outlet.

5. Instrucciones de funcionamiento

To use your JOCCA UV Lamp for nail curing:

1. Preparación: Ensure your nails are prepared and the nail polish or gel has been applied according to the product's instructions.
2. Posicionamiento: Carefully place your hand or foot inside the lamp, ensuring that all nails are positioned directly under the UV bulbs for even exposure.
3. Encendido: Locate the power switch (usually on the top or side of the unit) and turn the lamp EN.
4. Tiempo de curado: Allow the nails to cure for the recommended duration specified by your nail polish or gel manufacturer. Curing times can vary significantly between products.
5. Apagado: Once the curing process is complete, turn the lamp OFF using the power switch and carefully remove your hand or foot.
6. Repetir: Repeat the process for additional coats or the other hand/foot as needed.

6. Mantenimiento

Proper maintenance ensures the longevity and optimal performance of your UV lamp.

Limpieza

• Desconecte siempre el lamp de la fuente de alimentación antes de limpiar.
• Limpie el exterior de la lamp con un tacto suave, seco o ligeramente secoamp paño.
• No utilice limpiadores abrasivos, disolventes o productos químicos agresivos, ya que pueden dañar la superficie.
• Nunca sumerja la unidad en agua ni en ningún otro líquido.

Reemplazo de bombilla

If a UV bulb stops working or its effectiveness diminishes:

1. Desconectar la energía: Asegúrese de que lamp is unplugged from the electrical outlet.
2. Quitar la bombilla vieja: Carefully remove the non-functional UV bulb by gently pulling or twisting it out of its socket (depending on the bulb type).
3. Insertar bombilla nueva: Insert a new, compatible UV bulb into the empty socket. Ensure it is securely fitted.
4. Compatibilidad: Only use replacement bulbs specified by JOCCA for the 6285U model to ensure proper function and safety.

7. Solución de problemas

If you encounter issues with your JOCCA UV Lamp, consulte los siguientes problemas y soluciones comunes:

• Lamp no se enciende:
  • Check if the power cable is securely plugged into both the lamp and a functional electrical outlet.
  • Asegúrese de que el interruptor de encendido esté en la posición "ENCENDIDO".
  • Verify that all UV bulbs are correctly installed and not loose.
• Nail polish/gel is not curing:
  • Confirm that you are using a nail polish or gel product that specifically requires UV light for curing.
  • Check if all UV bulbs are working. Replace any non-functional bulbs.
  • Ensure the curing time is sufficient as per the nail product's instructions. Some products require longer exposure.
• Curado desigual:
  • Ensure your hand or foot is positioned correctly inside the lamp, allowing all nails to receive even exposure to the UV light.
  • Check for any obstructions blocking the UV light from reaching certain nails.

8. Especificaciones

9. Garantía y soporte

For detailed warranty information, product registration, or customer support, please refer to the warranty card included with your purchase or visit the official JOCCA website. You may also contact JOCCA customer service directly for assistance with any product-related inquiries or issues.

Conserve su comprobante de compra para reclamos de garantía.