THERMOS Glass Vacuum Insulated Pump Pot Instruction Manual

Introducción

Thank you for choosing the THERMOS Glass Vacuum Insulated Pump Pot. This manual provides essential information for the safe and efficient use of your new thermal carafe. Designed for maximum temperature retention, this 2-quart (64 ounces) metallic gray pump pot keeps beverages hot for 12 hours and cold for 24 hours. Its durable glass vacuum insulation and user-friendly features make it ideal for various settings.

Información importante de seguridad

• No use in a microwave oven or on any type of stovetop.
• No overfill the pump pot. Leave space for the pump mechanism.
• No use for carbonated beverages or dry ice, as pressure buildup can cause the lid to eject or contents to spray.
• No use for storing or carrying ice cubes, as this may damage the glass liner.
• Manténgase fuera del alcance de los niños cuando esté lleno de líquidos calientes.
• Always ensure the lid is securely closed before transporting.

Producto terminadoview

The THERMOS Glass Vacuum Insulated Pump Pot features a robust design for optimal performance and ease of use. Key components include the main body with glass vacuum insulation, a pump-action dispenser, a convenient carrying handle, and a 360-degree swivel base.

Imagen 1: Frente view of the THERMOS Glass Vacuum Insulated Pump Pot in metallic gray. The pump mechanism and carrying handle are visible.

Imagen 2: De arriba hacia abajo view of the THERMOS Pump Pot with the lid open, revealing the wide mouth opening and the removable pump assembly for easy cleaning and refilling.

Configuración y uso inicial

1. Desembalaje: Carefully remove the pump pot from its packaging. Retain packaging for future storage or transport.
2. Limpieza inicial: Before first use, wash all parts with warm, soapy water. Rinse thoroughly and dry. The pump assembly can be easily removed for detailed cleaning.
3. Precalentamiento/Preenfriamiento: For best results, pre-heat the interior with hot water for 5-10 minutes before filling with hot beverages, or pre-cool with cold water/ice for 5-10 minutes before filling with cold beverages. Empty the pre-heating/pre-cooling water before adding your desired beverage.
4. Relleno: Open the lid by pressing the two side buttons and lifting. Pour your hot or cold beverage into the wide mouth opening. Do not fill past the neck of the pot to allow space for the pump mechanism.
5. Asegurar la tapa: Reinsert the pump assembly and close the lid firmly until it clicks into place. Ensure the lock switch is in the 'CLOSED' position for transport or to prevent accidental dispensing.

Instrucciones de funcionamiento

Dispensing Beverages

1. Descubrir: Locate the lock switch on the top of the lid and slide it to the 'OPEN' position.
2. Posición Copa: Place your cup or mug directly under the dispenser spout.
3. Bomba: Press down firmly on the pump button at the top of the lid. The beverage will dispense from the spout. Release the button to stop the flow.
4. Base giratoria: The 360-degree swivel base allows you to easily rotate the pot to direct the pour without lifting the entire unit, making it convenient for self-service.
5. Cerrar con llave: After dispensing, slide the lock switch back to the 'CLOSED' position to prevent accidental spills and maintain temperature.

Retención de temperatura

The glass vacuum insulation ensures maximum temperature retention:

• Bebidas calientes: Keeps hot for up to 12 hours.
• Bebidas frías: Keeps cold for up to 24 hours.

Cuidado y mantenimiento

• Lavar a mano únicamente: This pump pot is no apto para lavavajillas. Hand wash all components with warm, soapy water.
• Limpieza del interior: The wide mouth opening allows for easy access to the interior for thorough cleaning. The pump assembly can be detached for separate cleaning.
• El secado: Asegúrese de que todas las piezas estén completamente secas antes de volver a ensamblarlas y guardarlas para evitar olores o moho.
• Resistente a huellas dactilares: The metallic gray exterior is designed to be fingerprint resistant, making it easy to maintain its appearance with a simple wipe.

Solución de problemas

• Liquid not dispensing: Ensure the lock switch is in the 'OPEN' position. Check if the pump assembly is correctly installed and not clogged.
• Poor temperature retention: Ensure the lid is securely closed and the lock switch is in the 'CLOSED' position. Verify that the pump pot was properly pre-heated or pre-cooled before filling.
• Fuga: Check that the lid and pump assembly are correctly seated and tightened. Inspect gaskets for any damage or wear.

Presupuesto

Garantía y soporte

For warranty information or customer support, please refer to the documentation included with your purchase or visit the official THERMOS webSitio. Conserve su comprobante de compra para cualquier reclamación de garantía.