1. Información importante de seguridad
ADVERTENCIA: Lea todas las advertencias e instrucciones de seguridad antes de utilizar este producto. El incumplimiento de las advertencias e instrucciones puede provocar descargas eléctricas, incendios o lesiones graves.
- Utilice siempre el equipo de protección personal adecuado, que incluya gafas de seguridad, guantes y calzado resistente.
- Mantenga las manos y los pies alejados de las cuchillas. Estas permanecen en movimiento brevemente después de apagar la herramienta.
- No opere la herramienta en condiciones húmedas o en presencia de líquidos o gases inflamables.
- Ensure the battery is fully charged before use and stored properly when not in use.
- Mantenga a los niños y transeúntes alejados mientras opera la herramienta.
- Este producto contiene sustancias químicas que el estado de California reconoce como causantes de cáncer y defectos de nacimiento u otros daños reproductivos (advertencia de la Proposición 65).
2. Producto terminadoview
The Greenworks 7.2V Cordless 2-in-1 Shear Shrubber is a versatile tool designed for light shrubbery work and grass edging. It features a lightweight design and includes interchangeable blades for different tasks.
- 7.2-Volts of Lithium-Ion Power: Provides reliable cordless operation.
- Funcionalidad 2 en 1: Easily switches between a hedger blade and a shear blade.
- Ligero y fácil de usar: Designed for comfortable handling and maneuverability.
- Cuchillas de alta calidad: Durable alloy steel blades for efficient cutting.
Figure 2.1: Greenworks 7.2V Cordless 2-in-1 Shear Shrubber with shear blade attached.
3. Configuración
3.1 Carga de la batería
The tool comes with a built-in 7.2V Lithium-Ion battery. Before first use, fully charge the battery. Refer to the separate charger manual for specific charging instructions. Ensure the charger is connected to a standard power outlet and the tool is securely placed in the charging dock.
3.2 Attaching/Detaching Blades
The Greenworks 2-in-1 Shear Shrubber allows for tool-less blade changes. Always ensure the tool is OFF and disconnected from any power source before changing blades.
- To remove a blade: Locate the blade release mechanism (usually a button or latch) on the tool body. Press or slide it to unlock the blade. Carefully slide the blade assembly off the tool.
- To attach a blade: Align the new blade assembly with the tool's drive shaft. Slide the blade assembly onto the tool until it clicks securely into place. Ensure the blade release mechanism re-engages, locking the blade firmly. Gently tug on the blade to confirm it is secure before operation.
Figure 3.1: Illustration of the tool-less blade transition for changing between shear and hedger blades.
4. Instrucciones de funcionamiento
4.1 Arranque y parada de la herramienta
The Greenworks Shear Shrubber features a double safety protection system to prevent accidental starts.
- To start: Press and hold the safety lock button (typically located on the side of the handle) with your thumb. While holding the safety lock button, squeeze the trigger switch with your fingers. The blades will begin to move.
- To stop: Release the trigger switch. The blades will stop moving shortly after.
Figure 4.1: The safety lock button and trigger mechanism on the tool handle.
4.2 Using the Shear Blade (Grass Edging)
The shear blade is ideal for precise grass edging around flowerbeds, walkways, and other obstacles.
- Attach the shear blade as described in Section 3.2.
- Hold the tool firmly with both hands (if comfortable, or one hand for tight spaces) and position the blade parallel to the ground or at a slight angle for a clean edge.
- Start the tool and move it slowly and steadily along the desired edge. Avoid forcing the tool through thick grass.
Figure 4.2: Using the shear blade for precise grass edging.
4.3 Using the Hedger Blade (Shrub Trimming)
The hedger blade is suitable for shaping and trimming light shrubbery and small hedges.
- Attach the hedger blade as described in Section 3.2.
- Hold the tool firmly and guide the blade through the shrubbery with smooth, even strokes.
- For best results, trim small amounts at a time. Avoid cutting branches thicker than the recommended capacity.
Figure 4.3: The hedger blade effectively trimming small shrubs.
5. Mantenimiento
5.1 Limpieza y lubricación de la cuchilla
Regular cleaning and lubrication extend blade life and maintain cutting performance.
- After each use, ensure the tool is OFF and the battery is removed.
- Use a stiff brush or cloth to remove debris, sap, and grass clippings from the blades.
- Apply a light coat of blade lubricant (such as WD-40 or synthetic oil) to the blades to prevent rust and ensure smooth operation.
Figure 5.1: Inspect and clean the hedger blade regularly.
5.2 Cuidado y almacenamiento de la batería
- Guarde la herramienta y la batería en un lugar fresco y seco, alejado de la luz solar directa y de temperaturas extremas.
- No guarde la batería descargada durante períodos prolongados. Cárguela periódicamente si no la utiliza.
- Evite exponer la batería al agua o la humedad.
6. Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| La herramienta no arranca | Battery not charged; Safety lock not engaged; Trigger not pressed fully. | Charge battery; Ensure safety lock button is pressed simultaneously with the trigger. |
| Bajo rendimiento de corte | Blades are dull or dirty; Material is too thick. | Clean and lubricate blades; Sharpen or replace blades if necessary; Do not attempt to cut oversized material. |
| Blades jam | Debris caught in blades; Overloading the tool. | Turn off tool and remove battery, then carefully clear debris; Reduce cutting load. |
If you encounter issues not listed here or if solutions do not resolve the problem, please contact Greenworks Customer Support.
7. Especificaciones
| Característica | Especificación |
|---|---|
| Marca | Obras verdes |
| Número de modelo | SH072B00 |
| Fuente de poder | Alimentado por batería (iones de litio de 7.2 V) |
| Dimensiones del producto | 12" de largo x 3.27" de ancho x 4.33" de alto |
| Peso del artículo | 1.2 libras |
| Longitud de la hoja | 9.5 Inches (Hedger Blade) |
| Material de la hoja | Acero aleado |
| Color | Verde |
| Pilas necesarias | 1 batería de iones de litio (incluida) |
8. Información de garantía
This Greenworks tool is covered by a Garantía de herramientas de 4 años from the date of purchase. This warranty protects your investment against defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
For full warranty terms and conditions, please refer to the official Greenworks websitio o póngase en contacto con el servicio de atención al cliente.
9. Atención al cliente
For assistance with your Greenworks 7.2V Cordless 2-in-1 Shear Shrubber, including technical support, parts, or warranty service, please contact Greenworks Customer Support.
- Websitio: Visita el Greenworks oficial webSitio para preguntas frecuentes y recursos de soporte.
- Teléfono: Consulte el embalaje de su producto o el sitio web de Greenworks. webSitio para números de contacto actuales.
- Correo electrónico: Comuníquese con el soporte técnico por correo electrónico para consultas no urgentes.
