Introducción
This manual provides essential information for the safe and proper installation and use of your One For All TV Bracket WM4411. This fixed wall mount is designed for televisions with screen sizes from 32 to 60 inches and is compatible with various VESA mounting patterns. Please read all instructions carefully before beginning installation.
Información de seguridad
- Always read and understand all instructions before installation. If you have any doubts, consult a qualified professional.
- Asegúrese de que la estructura de la pared pueda soportar de forma segura el peso combinado del soporte y el televisor.
- Do not exceed the maximum weight capacity of 1000kgs (2200 lbs) for this mount.
- Use only the provided mounting hardware or appropriate alternatives for your specific wall type.
- Mantenga todas las piezas pequeñas y los materiales de embalaje fuera del alcance de los niños.
- Use equipo de seguridad adecuado, como protección para los ojos, durante la instalación.
Contenido del paquete
Verifique que todos los componentes estén presentes antes de comenzar la instalación:
- Wall Mount Assembly (Wall Plate and TV Brackets)
- Mounting Kit (various screws, washers, spacers, concrete anchors)
- Manual de instrucciones
Note: Specific quantities of fasteners may vary. Refer to the detailed parts list in your physical manual for exact counts.
Setup (Installation Guide)
The One For All Toolbox App is available for easy setup and provides additional installation tools.
An image showing the black metal frame of the One For All WM4411 fixed TV wall mount, designed to securely hold televisions against a wall. It features a rectangular wall plate with multiple mounting holes and two vertical TV brackets with various VESA-compatible holes.
- Prepara la pared:
- Locate suitable mounting points (wood studs for drywall, solid concrete/brick).
- Use a stud finder to confirm stud locations if mounting to drywall.
- Mark the desired height and center of your TV on the wall.
- Monte la placa de pared:
- Hold the wall plate against the wall at the marked location and use a spirit level to ensure it is perfectly horizontal.
- Marque los puntos de perforación a través de los agujeros en la placa de pared.
- Drill pilot holes according to the recommended drill bit size for your wall type and chosen fasteners.
- Secure the wall plate to the wall using the appropriate screws and anchors. Ensure it is firmly attached.
- Fijar los soportes al televisor:
- Coloque con cuidado el televisor boca abajo sobre una superficie suave y limpia.
- Identifique los orificios de montaje VESA en la parte posterior de su televisor.
- Select the correct size screws, washers, and spacers from the mounting kit that fit your TV's VESA pattern (e.g., 100x100, 200x200, 400x400).
- Attach the two vertical TV brackets to the back of your TV, ensuring they are oriented correctly and securely tightened.
- Monte el televisor en la placa de pared:
- Con ayuda, levante con cuidado el televisor con los soportes adjuntos.
- Enganche los soportes del televisor en el borde superior de la placa de pared.
- Baje suavemente el televisor hasta que los soportes encajen completamente en la placa de pared.
- Asegure el televisor:
- Locate the safety screws or locking mechanisms at the bottom of the TV brackets.
- Tighten these screws or engage the locking mechanisms to secure the TV to the wall plate and prevent accidental dislodgement.
Operante
Once installed, the One For All WM4411 is a fixed wall mount, meaning it holds your TV securely in a static position close to the wall. There are no moving parts for adjustment. Ensure the TV is properly seated and secured to the wall plate as per the installation instructions.
Mantenimiento
- Limpieza: Utilice un paño suave y seco para limpiar el soporte. Evite limpiadores abrasivos o disolventes.
- Controles periódicos: Periodically inspect all screws and connections to ensure they remain tight and secure. Over time, vibrations or minor shifts can loosen fasteners.
- Daño: Si alguna parte del soporte parece dañada o desgastada, no la use. Contacte con atención al cliente para obtener ayuda.
Solución de problemas
El televisor no está nivelado después de la instalación:
Ensure you used a reliable spirit level during the wall plate mounting step. If the TV is slightly off, you may need to adjust the wall plate or re-drill if necessary. Do not rely solely on included spirit levels; cross-reference with a trusted tool.
El soporte se siente suelto en la pared:
This indicates improper installation. Immediately remove the TV. Re-check your wall type and ensure you used the correct anchors and fasteners. Verify that all screws are fully tightened into solid structural elements (studs, concrete). If unsure, consult a professional installer.
Missing parts from the mounting kit:
Contact One For All customer support or the retailer where you purchased the product to request replacement parts.
Presupuesto
| Característica | Detalle |
|---|---|
| Número de modelo | WM4411 |
| Tamaños de pantalla compatibles | 32 - 60 pulgadas |
| Compatibilidad VESA | 100x100, 200x100, 200x200, 300x200, 300x300, 400x200, 400x300, 400x400 |
| Capacidad máxima de peso | 1000 kg (2200 libras) |
| Tipo de montaje | Soporte de pared fijo |
| Dimensiones del producto | 17.13 x 0.98 x 18.86 pulgadas |
| Peso del artículo | 2.33 libras |
| Material | Plastic (Note: Main structure is metal, plastic refers to specific components) |
Garantía y soporte
For warranty information and technical support, please refer to the official One For All website or contact their customer service directly. You can also utilize the One For All Toolbox App for additional assistance and resources.
Visita el Tienda One For All Para más productos e información.
