1. Producto terminadoview
El ECHOGEAR SlimView TV Wall Mount provides a secure and minimalist solution for mounting your television. Its low-profile design ensures your TV sits close to the wall, enhancing the aesthetic of your living space. This manual provides detailed instructions for proper installation and use.
2. Guía de instalación
Follow these steps carefully to ensure a safe and secure installation of your ECHOGEAR SlimView TV Wall Mount.
2.1. Vídeo de instalación oficial
Para obtener una guía visual, mire el video de instalación oficial a continuación:
An official installation video demonstrating the step-by-step process for mounting the ECHOGEAR SlimView TV Wall Mount. This video covers unboxing, attaching TV brackets, assembling and securing the wall plate, and finally hanging the television.
2.2. Contenido del paquete
Before beginning, verify that all components are present in your package:
2.3. Fijación de los soportes del televisor
Securely attach the vertical TV brackets to the back of your television using the appropriate screws from the hardware kit. Ensure they are aligned with your TV's VESA mounting holes.
2.4. Wall Plate Assembly and Mounting
Assemble the wall plate components if necessary, then mark and drill pilot holes on your wall. Secure the wall plate to the wall using the provided lag bolts. This mount is compatible with:
- montantes de madera de 16 pulgadas
- montantes de madera de 24 pulgadas
- Poured concrete walls
- Concrete block walls
2.5. Colgar el televisor
Carefully lift your television and hook the TV brackets onto the top edge of the wall plate. Gently lower the TV until the brackets engage with the bottom of the wall plate, securing it in place. Listen for an audible 'click' to confirm the security system is engaged.
2.6. Compatibilidad VESA
Este soporte admite los siguientes patrones VESA:
- 200x100
- 200x200
- 300x200
- 300x300
- 400x200
- 500x200
- 400x300
- 400x400
- 500x400
- 600x400
3. Operación
3.1. Accessing Cables
To access cables behind your television, utilize the quick-release pull strings located at the bottom of the TV brackets. Pulling these strings will disengage the TV from the wall plate, allowing you to tilt the TV forward for cable management without fully removing it from the wall.
3.2. Gestión de cables
For a tidy installation, consider using ECHOGEAR cable management accessories to route and conceal your television's cables.
4. Mantenimiento
To ensure the long-term stability and safety of your TV mount, periodic maintenance is recommended:
- Comprobar conexiones: Annually inspect all screws and bolts securing the mount to the wall and the TV to the mount. Tighten any that may have loosened over time.
- Superficies limpias: Utilice un paño suave y seco para limpiar el soporte. Evite limpiadores abrasivos o disolventes.
- Inspeccionar si hay daños: Regularly check for any signs of wear, corrosion, or damage to the mount components. If any damage is found, contact ECHOGEAR customer support immediately.
5. Solución de problemas
Si encuentra algún problema durante o después de la instalación, consulte los siguientes consejos comunes de solución de problemas:
- TV no nivelada: Ensure the wall plate is perfectly level before drilling. Some mounts allow for minor post-installation leveling adjustments. If not, you may need to re-adjust the wall plate.
- Dificultad para colgar el televisor: Ensure the TV brackets are correctly aligned with the wall plate. Two people are recommended for safely lifting and hanging the TV.
- Cables Difficult to Access: El bajo profesionalfile design means limited space behind the TV. Utilize the pull-string release mechanism to tilt the TV forward for better access. Consider using right-angle HDMI adapters if space is extremely tight.
- El monte se siente suelto: Immediately remove the TV and re-check all wall and TV connections. Ensure lag bolts are securely fastened into studs or appropriate concrete anchors. Do not re-hang the TV until the mount is completely stable.
If problems persist, please contact ECHOGEAR customer support for assistance.
6. Especificaciones del producto
| Especificación | Detalle |
|---|---|
| Nombre de marca | ECHOGEAR |
| Peso del artículo | 6.97 libras |
| Dimensiones del producto | 2.3 x 10.75 x 17.85 pulgadas |
| Número de modelo del artículo | EGLL1-BK |
| Color | Original |
| Material | Acero aleado |
| Tipo de montaje | Montaje en pared |
| Tipo de movimiento | Fijado |
| Tamaño máximo compatible | 80 pulgadas |
| Tamaño mínimo compatible | 32 pulgadas |
| Dispositivos compatibles | Televisión |
| Código Postal | 793795531421 |
| Fecha de primera disponibilidad | 27 de septiembre de 2016 |
7. Garantía y soporte
ECHOGEAR stands behind the quality of its products. This TV wall mount comes with a 5 año de garantía.
For any questions, technical assistance, or warranty claims, please contact our US-based customer support team. Our experts are available 7 days a week to provide assistance.
Customer Support Phone: 1-855-428-2490
You can also refer to the full Installation Manual (PDF) for more detailed information: Manual Descargar PDF
